Diploma in Interface Design and Operator Confidence
Online postgraduate diploma of 800 hours in interface design and operator trust: 8 modules covering human-robot interaction, trust in automation, interface design principles, multimodal interfaces, communication of intent and state, safety and collaborative design, user-centred design, and a final project, with an assigned technical tutor.
Diploma in Interface Design and Operator Confidence — studying from Singapore
Singapore is a leading robotics and automation centre, with strong activity in logistics automation, industrial robotics and smart manufacturing. The Agency for Science, Technology and Research and Nanyang Technological University support robotics research, while the Economic Development Board promotes automation adoption. Engineers work on control systems, industrial automation, mobile robots and warehouse systems. Employers include multinational automation suppliers, logistics operators and manufacturers modernising their plants.
Fees for Singapore: S$2,560 (Singapore dollar), with instalments and employer sponsorship available.
Relevant bodies in Singapore
Typical roles
Questions from Singapore
Will this qualification be recognised by professional bodies in Singapore?
SEIUM's qualifications are private, not official state degrees, and are not accredited by any national body in Singapore. Engineers in Singapore can seek Professional Engineer status through the Professional Engineers Board, and the Institution of Engineers Singapore is a professional body for engineers. Recognition of a private qualification is decided by employers or the relevant body.
How might this training be used by employers in Singapore?
Singapore's manufacturing, logistics, electronics and smart-facility sectors use automation and control systems extensively, so these skills may suit roles in systems integration, controls engineering or automation support. The programme does not guarantee employment. Employers will usually look at your practical projects and experience alongside the qualification.
Can I study this alongside a full-time job, and can my employer help fund it?
Study is entirely online and in English, with an assigned technical tutor, so you can fit it around a job in Singapore. Master's programmes take 1,900 hours, postgraduate diplomas 800 hours and specialist courses 300 hours. Fees can be paid in instalments, and employer sponsorship is possible; automation teams in many firms may support relevant training.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Explain interaction models and human factors in robotics.
Analyse the calibration of operator trust in automation.
Apply the interface design principles of ISO 9241 and ISA-101.
Design multimodal interfaces for interaction with robots.
Communicate robot intent and state in a legible way.
Integrate collaborative safety requirements into interface design.
Follow a user-centred design process with real operators.
Who it's for
- Human-robot interaction designers.
- Human factors engineers working on automated workplaces.
- Industrial HMI designers who want to bring trust and transparency into their screens.
- Collaborative robotics integrators responsible for operator-facing cells.
- HRI researchers looking for an applied, standards-based perspective.
- Industrial user experience specialists.
- Engineering or science graduates looking to enter collaborative robotics.
What you'll work with
- ISO 9241-110:2020 (ergonomics of human-system interaction: interaction principles)
- ISO 9241-210:2019 (human-centred design for interactive systems)
- ISO 10218-2:2025 (safety of industrial robot applications and cells)
- ISO/TS 15066:2016 (collaborative robots)
- ANSI/ISA-101.01-2015 (human machine interfaces for process automation systems)
- IEC 61310-1:2007 (indication, marking and actuation: visual, acoustic and tactile signals)
- ISO 11064-5:2008 (ergonomic design of control centres: displays and controls)
- Regulation (EU) 2023/1230 on machinery (EU machinery safety regulation)
- Figma
- Unity
- ROS 2
- Universal Robots PolyScope
- Qt Design Studio
8 modules
1.1Evolution of interaction with industrial robots1.2Interaction models: coexistence, cooperation and collaboration1.3Human factors in automation1.4Operator situational awareness1.5Mental workload1.6Sheridan's levels of automation1.7Human-centred automation1.8Industry 5.0 and the human-centric approach1.9Risks of overtrust1.10Case study: analysis of operator errors in a collaborative cell
2.1Lee and See trust models2.2Trust calibration2.3Distrust and system disuse2.4Overtrust and complacency2.5Transparency and explainability2.6Predictability of robot behaviour2.7Trust after failures and recovery2.8Individual and cultural differences2.9Measuring trust2.10Workshop: designing messages to rebuild trust after a failure
3.1Interaction ergonomics according to ISO 9241-1103.2Mental models and affordances3.3HMI design according to ISA-1013.4Visual hierarchy and use of colour3.5Presentation of states and modes3.6Designing understandable alarms3.7High-performance interfaces3.8Accessibility and inclusion3.9Interface prototyping3.10Practical exercise: redesign of a robot HMI screen
4.1Programming panels and teach pendants4.2Gesture interfaces4.3Voice interfaces4.4Augmented reality for operators4.5Robot light signalling4.6Projection of intentions onto the floor4.7Haptic interfaces4.8Programming by demonstration4.9Selecting modalities by task4.10Lab: prototype of intent indication with light and sound
5.1Legibility of robot motion5.2Intent signals before moving5.3Communicating work zones5.4Visible safety states5.5Feedback on commands5.6Explanations of autonomous behaviour5.7Error handling and communication5.8Design for emergency situations5.9Consistency across channels5.10Practical exercise: designing a state language for a cobot
6.1ISO 10218 requirements on interfaces6.2Collaborative operation and ISO/TS 150666.3Enabling and stop devices6.4Control design according to IEC 613106.5Preventing use errors6.6Interface requirements of the Machinery Regulation6.7Psychosocial factors6.8Physical ergonomics in shared tasks6.9Operator training6.10Case study: interface of a collaborative assembly cell
7.1The ISO 9241-210 process7.2User research on the shop floor7.3Personas and use scenarios7.4Task analysis7.5Co-design with operators7.6Low- and high-fidelity prototypes7.7Iteration and early validation7.8Documenting usability requirements7.9Change management on the shop floor7.10Workshop: co-design session with operators
8.1Context of use and users8.2Task and risk analysis8.3Trust and transparency requirements8.4Design of the main interface8.5Intent and state signals8.6Functional prototype8.7Preliminary evaluation with users8.8Improvement proposals8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
100% online training on the SEIUM Institute campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within the intake, which makes the programme compatible with full-time work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Figma, Unity, ROS 2, Universal Robots PolyScope and Qt Design Studio, in free, academic or evaluation versions. Practical work is based on real procedures: interface prototyping for collaborative cells, design of robot intent signals and co-design sessions with operators. Assessment is continuous by module, plus the final project.
Standards covered: ISO 9241-110:2020, ISO 9241-210:2019, ISO 10218-2:2025, ISO/TS 15066:2016, ANSI/ISA-101.01-2015, IEC 61310-1:2007, ISO 11064-5:2008, Regulation (EU) 2023/1230 on machinery.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with Figma, Unity, ROS 2, Universal Robots PolyScope and Qt Design Studio, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer capable of running the programme software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Postgraduate Diploma in MPC with Constraints and Real-Time
Online 800 h Postgraduate Diploma in MPC with Constraints and Real-Time. 8 modules covering IEC 61131-3, IEC 61508 and MATLAB Model Predictive Control Toolbox. Assigned tutor…
Postgraduate Diploma in Safety Case and Compliance Dossier
Online 800-hour Postgraduate Diploma in Safety Case and Compliance Dossier. 8 modules covering Regulation (EU) 2023/1230 on machinery, ISO 12100:2010 and Adelard ASCE. Assigned tutor and…
Postgraduate Diploma in PLC/Robot Emulation and FAT Testing
Online Postgraduate Diploma of 800 hours in PLC/Robot Emulation and FAT Testing. 8 modules with IEC 61131-3, IEC 62714 AutomationML and Siemens PLCSIM Advanced. Assigned tutor…
More in Robotics, Automation & Control
All Robotics, Automation & Control programmes → · How to apply · Fees & financing · Scholarships