Postgraduate Diploma in Certified Robotic Welding and Collaborative Handling
800-hour online Postgraduate Diploma in Certified Robotic Welding and Collaborative Handling. 8 modules covering ISO 10218-2:2025, ISO 14732:2013 and ABB RobotStudio. Assigned tutor and open enrolment.
Postgraduate Diploma in Certified Robotic Welding and Collaborative Handling — studying from Singapore
Singapore is a leading robotics and automation centre, with strong activity in logistics automation, industrial robotics and smart manufacturing. The Agency for Science, Technology and Research and Nanyang Technological University support robotics research, while the Economic Development Board promotes automation adoption. Engineers work on control systems, industrial automation, mobile robots and warehouse systems. Employers include multinational automation suppliers, logistics operators and manufacturers modernising their plants.
Fees for Singapore: S$2,560 (Singapore dollar), with instalments and employer sponsorship available.
Relevant bodies in Singapore
Typical roles
Questions from Singapore
Will this qualification be recognised by professional bodies in Singapore?
SEIUM's qualifications are private, not official state degrees, and are not accredited by any national body in Singapore. Engineers in Singapore can seek Professional Engineer status through the Professional Engineers Board, and the Institution of Engineers Singapore is a professional body for engineers. Recognition of a private qualification is decided by employers or the relevant body.
How might this training be used by employers in Singapore?
Singapore's manufacturing, logistics, electronics and smart-facility sectors use automation and control systems extensively, so these skills may suit roles in systems integration, controls engineering or automation support. The programme does not guarantee employment. Employers will usually look at your practical projects and experience alongside the qualification.
Can I study this alongside a full-time job, and can my employer help fund it?
Study is entirely online and in English, with an assigned technical tutor, so you can fit it around a job in Singapore. Master's programmes take 1,900 hours, postgraduate diplomas 800 hours and specialist courses 300 hours. Fees can be paid in instalments, and employer sponsorship is possible; automation teams in many firms may support relevant training.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Select the appropriate robotic welding process.
Configure the equipment of a welding cell.
Programme welding paths with joint tracking.
Qualify procedures and operators according to ISO standards.
Integrate collaborative handling into the cell.
Certify the safety of collaborative applications.
Monitor and improve welding process quality.
Who it's for
- Robot welding programmer looking to specialise in Certified Robotic Welding and Collaborative Handling.
- Welding engineer looking to specialise in Certified Robotic Welding and Collaborative Handling.
- Robotic cell integrator looking to specialise in Certified Robotic Welding and Collaborative Handling.
- Welding quality technician looking to specialise in Certified Robotic Welding and Collaborative Handling.
- Machine safety technician looking to specialise in Certified Robotic Welding and Collaborative Handling.
- Welding coordinator looking to specialise in Certified Robotic Welding and Collaborative Handling.
- Graduates in engineering or sciences seeking to enter the automotive sector.
What you'll work with
- ISO 10218-2:2025
- ISO 14732:2013
- ISO 15614-1:2017
- ISO 3834-2:2021
- ISO/TS 15066:2016
- ISO 5817:2023
- ISO 13849-1:2023
- Regulation (EU) 2023/1230 on machinery
8 modules · 800 h
1.1Robotic MIG/MAG welding1.2Automated TIG welding1.3Resistance spot welding1.4Laser and hybrid welding1.5Process variables and their effect1.6Metal transfer: short-circuit, spray and pulsed1.7Shielding gases and consumables1.8Metallurgy of the heat-affected zone1.9Typical welding defects1.10Workshop: process selection for a part
2.1Welding robots and external axes2.2Welding power sources and their communication2.3Torches and anti-collision systems2.4Positioners and turntables2.5Torch cleaners2.6Fume extraction2.7Welding tooling and fixtures2.8Arc screens and protective curtains2.9Welding cell safety2.10Practice: configuring a MAG cell
3.1Welding points and torch orientation3.2Work and travel angles3.3Weaving3.4Arc-sensing joint tracking3.5Touch-sensing search3.6Laser seam tracking3.7Offline path programming3.8Coordination with positioners3.9Welding parameter libraries3.10Laboratory: multi-pass welding program
4.1WPS specification4.2Procedure qualification to ISO 15614-14.3Operator qualification to ISO 147324.4ISO 3834 quality requirements4.5Visual and dimensional testing4.6Non-destructive testing4.7Destructive testing: macrography4.8Welding traceability and records4.9ISO 5817 acceptance criteria4.10Case study: WPS and bead qualification
5.1Handling applications with cobots5.2Collaborative grippers and end effectors5.3Payloads and moments5.4Collaborative palletising and depalletising5.5Machine feeding5.6Cobots in assisted welding5.7Manual guidance interfaces5.8Operator ergonomics5.9Productivity versus industrial robots5.10Practice: workpiece loading cell for welding
6.1Risk assessment to ISO 121006.2Requirements of ISO 10218-2:20256.3Biomechanical limits of ISO/TS 150666.4Force and pressure measurement6.5Safety functions and PL6.6Validation to ISO 13849-26.7Technical file and declaration of conformity6.8CE marking of the cell6.9Specific risks of collaborative welding6.10Laboratory: validation of a PFL application
7.1Current and voltage monitoring7.2Welding data management systems7.3Online defect detection7.4Vision for bead inspection7.5Statistical process analysis7.6Torch and consumables maintenance7.7Reducing spatter and rework7.8Cycle time optimisation7.9Cell quality indicators7.10Case study: reducing porosity defects
8.1Definition of the part and process8.2Cell and tooling design8.3Welding programming8.4WPS and qualification plan8.5Collaborative handling integration8.6Risk assessment and certification8.7Quality control plan8.8Economic analysis of the cell8.9Report and presentation8.10Final review with the tutor
How you'll learn
Training 100% online on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetable: students progress at their own pace within the intake, which makes it possible to combine the course with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is ABB RobotStudio, FANUC ROBOGUIDE WeldPRO, Fronius WeldCube, RoboDK, Universal Robots PolyScope, in free, academic or evaluation versions. Case studies are based on real welding procedure qualification records, force measurement in collaborative applications, and visual and macrographic bead inspection. Assessment is continuous per module plus the final integrating project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Select the appropriate robotic welding process.
Configure the equipment of a welding cell.
Programme welding paths with joint tracking.
Qualify procedures and operators according to ISO standards.
Integrate collaborative handling into the cell.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- Internet connection and a computer capable of running the programme's software.
- A sufficient level of Spanish to follow technical standards documentation.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme comprises 800 hours in total, spread over 6 to 8 months. That is an average of 10 to 15 hours per week, compatible with full-time work.
You will work with ABB RobotStudio, FANUC ROBOGUIDE WeldPRO, Fronius WeldCube, RoboDK, Universal Robots PolyScope. Free, academic or evaluation versions are used, and the tutor indicates a free alternative where one exists.
An own SEIUM diploma upon passing the continuous assessment and the integrating project. It is in-house training, not an official Ministry qualification.
Yes. Modules passed in a course or diploma in the same area are credited towards the advanced programme. Check the recognition policy when you enrol.
Related programmes
Postgraduate Diploma in Diagnostics, Structures and Fault Management
800-hour online Postgraduate Diploma in Diagnostics, Structures and Fault Management. 8 modules with IEC 60204-1, ISO 13849-1 and Siemens TIA Portal. Assigned tutor and open enrolment.
Postgraduate Diploma in Defect Traceability and Improvement Loops
Online 800-hour Postgraduate Diploma in Defect Traceability and Improvement Loops. 8 modules covering ISO 9001, IATF 16949 and Minitab. Assigned tutor and open enrolment.
Diploma in Scrap Reduction and OEE Improvement
Online postgraduate diploma of 800 hours in scrap reduction and OEE improvement. 8 modules covering ISO 22400-2, IATF 16949:2016 and ISO 9001:2015, with Minitab, Power BI…
More in Robotics, Automation & Control
All Robotics, Automation & Control programmes → · How to apply · Fees & financing · Scholarships