Diploma in Long-Term Safety Monitoring
Online postgraduate diploma of 800 hours in long-term safety monitoring of nuclear and waste facilities, structured in 8 modules covering long-term safety, surveillance programmes, hydrogeological, geotechnical and environmental radiological monitoring, emerging sensor technologies and records preservation, with an assigned technical tutor.
Diploma in Long-Term Safety Monitoring — studying from Malta
Malta has no nuclear power generation, and its nuclear engineering relevance lies mainly in radiation protection, safeguards awareness, medical and industrial radiation use, and regulatory oversight of radioactive materials. The Malta Radiation Protection Department and the Health Directorate oversee the use of radiation in hospitals, research and industry. Engineers may find roles in medical physics support, radiological monitoring and compliance. The sector is largely confined to applied and regulatory work rather than fuel cycle activity.
Fees for Malta: €1,490 (Euro), with instalments and employer sponsorship available.
Relevant bodies in Malta
Typical roles
Questions from Malta
Is there a professional route in Malta for nuclear engineering, and is SEIUM's qualification recognised?
Malta does not operate nuclear power plants, so nuclear engineering careers there are limited, and roles are more likely in regulation, consultancy or international work. SEIUM Institute's qualifications are private, not official state degrees, and are not accredited by any national body. Recognition is decided by employers or the relevant regulatory body, so verify this before enrolling.
What employment could this training lead to in Malta?
Given Malta has no nuclear power generation, local opportunities are few and would mostly sit within consultancy, international organisations or firms working abroad. Employers in these roles set their own qualification requirements, and a private online qualification may or may not be accepted. Reviewing job requirements and speaking with employers will show how the training would be viewed.
Can I study this from Malta without relocating, and how is the workload structured?
Yes, the programmes are 100% online, taught in English and suitable for study from home, so you do not need a student visa. Master's programmes total 1,900 hours, postgraduate diplomas 800 hours and specialist courses 300 hours. Each student has an assigned technical tutor, and fees are payable in instalments, with possible employer sponsorship.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand the objectives of long-term surveillance.
Design surveillance programmes.
Apply hydrogeological monitoring techniques.
Apply geotechnical monitoring techniques.
Manage environmental radiological monitoring.
Evaluate emerging sensor technologies.
Preserve information and memory over the long term.
Who it's for
- Environmental monitoring technicians
- Hydrogeologists
- Geotechnical engineers
- Radiation protection technicians
- Technical information managers
- Monitoring specialists
- Engineering or science graduates looking to move into radioactive waste management
What you'll work with
- IAEA SSR-5 (safety requirements for the disposal of radioactive waste)
- IAEA SSG-31 (monitoring and surveillance of radioactive waste disposal facilities)
- IAEA GSG-15 (remediation strategy and process for areas affected by past activities)
- Directive 2011/70/Euratom (EU framework for spent fuel and radioactive waste management)
- OECD/NEA RK&M (preservation of records, knowledge and memory across generations)
- Royal Decree 102/2014 (Spanish regulation on spent fuel and radioactive waste management)
- ISO 5667-11 (guidance on sampling of groundwaters)
- GMS (Groundwater Modeling System)
- ArcGIS
- Python with pandas
- MODFLOW
- Grafana
8 modules
1.1Objectives of long-term surveillance1.2Waste disposal facilities1.3Sites remediated after decommissioning1.4Surveillance timescales1.5Active and passive institutional control1.6Preservation of records1.7Long-term risks1.8Long-term institutional responsibilities1.9International surveillance experience1.10Case study: surveillance at El Cabril
2.1Design of surveillance programmes2.2Parameters to monitor2.3Sampling frequencies2.4Monitoring points2.5Action levels2.6Data quality2.7Information management2.8Periodic programme review2.9Reports to the regulator2.10Practical exercise: designing a surveillance programme
3.1Piezometers and monitoring networks3.2Chemical quality of groundwater3.3Use of environmental tracers3.4Groundwater sampling3.5Detection of radionuclides in water3.6Flow models for interpretation3.7Trends and anomalies3.8Multilevel monitoring boreholes3.9Well integrity3.10Laboratory: analysis of piezometric time series
4.1Field geotechnical instrumentation4.2Extensometers and inclinometers4.3Settlement measurement4.4Monitoring of cover systems4.5Seismic monitoring networks4.6Distributed fibre optic sensing4.7Remote sensing and radar interferometry4.8Surveillance of engineered barriers4.9Interpretation of deformations4.10Practical exercise: analysis of inclinometer data
5.1Radiological surveillance network5.2Environmental area dosimetry5.3Air and soil sampling5.4Food chain and bioindicators5.5Laboratory measurements5.6Detection limits5.7Comparison with background levels5.8Intercomparison programmes5.9Surveillance reports5.10Laboratory: processing environmental dosimetry data
6.1Long-life wireless sensors6.2Energy autonomy of sensors6.3Sensors in underground environments6.4Long-term data transmission6.5Sensor reliability and drift6.6Drones for surveillance6.7Data platforms and digital twins6.8The European Modern2020 project6.9Obsolescence strategies6.10Case study: sensor network in an underground laboratory
7.1Long-term records7.2Document preservation7.3Markers and knowledge transfer7.4The OECD/NEA RK&M initiative7.5Institutional knowledge management7.6Communication with future generations7.7Deposit in national archives7.8Geographic information systems7.9Ethical aspects of memory7.10Workshop: records preservation plan
8.1Selection of the facility8.2Long-term risk analysis8.3Definition of parameters8.4Design of the surveillance network8.5Data management8.6Preservation plan8.7Design conclusions8.8Surveillance recommendations8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
The programme is delivered 100% online on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so it fits alongside your job.
Each module combines theory, guided reading of the original standards and applied exercises. You work with GMS (Groundwater Modeling System), ArcGIS, Python with pandas, MODFLOW and Grafana in free, academic or evaluation versions. Practical work is based on real procedures for groundwater sampling, geotechnical monitoring and environmental radiological surveillance. Assessment is continuous by module, plus a final capstone project.
Standards covered: IAEA SSR-5, IAEA SSG-31, IAEA GSG-15, Council Directive 2011/70/Euratom, OECD/NEA RK&M, Royal Decree 102/2014, ISO 5667-11.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with GMS (Groundwater Modeling System), ArcGIS, Python with pandas, MODFLOW and Grafana, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Radioactive Material Cask Design
Online postgraduate diploma of 800 hours in radioactive material cask design, structured in 8 modules covering cask functions, regulatory design requirements, shielding, criticality, thermal and structural…
Diploma in Monitoring and Security in Transport
Online postgraduate diploma of 800 hours in monitoring and security in the transport of nuclear and radioactive material, structured in 8 modules covering the nuclear security…
Diploma in Real-Time Plant Monitoring
Online postgraduate diploma of 800 hours in real-time monitoring of nuclear plants, structured in 8 modules covering instrumentation and control, neutron and core monitoring, plant radiation…
More in Nuclear Engineering & Nuclear Fuel Cycle Technologies
All Nuclear Engineering & Nuclear Fuel Cycle Technologies programmes → · How to apply · Fees & financing · Scholarships