Diploma in Conditioning and Vitrification Technologies
Online postgraduate diploma of 800 hours in conditioning and vitrification technologies, structured in 8 modules covering radioactive waste classification, nuclear glass chemistry, industrial vitrification, cementation and alternative matrices, durability testing, waste packages and safety under IAEA GSR Part 5, Directive 2011/70/Euratom and IAEA SSR-6, with an assigned technical tutor.
Diploma in Conditioning and Vitrification Technologies — studying from Malta
Malta has no nuclear power generation, and its nuclear engineering relevance lies mainly in radiation protection, safeguards awareness, medical and industrial radiation use, and regulatory oversight of radioactive materials. The Malta Radiation Protection Department and the Health Directorate oversee the use of radiation in hospitals, research and industry. Engineers may find roles in medical physics support, radiological monitoring and compliance. The sector is largely confined to applied and regulatory work rather than fuel cycle activity.
Fees for Malta: €1,090 (Euro), with instalments and employer sponsorship available.
Relevant bodies in Malta
Typical roles
Questions from Malta
Is there a professional route in Malta for nuclear engineering, and is SEIUM's qualification recognised?
Malta does not operate nuclear power plants, so nuclear engineering careers there are limited, and roles are more likely in regulation, consultancy or international work. SEIUM Institute's qualifications are private, not official state degrees, and are not accredited by any national body. Recognition is decided by employers or the relevant regulatory body, so verify this before enrolling.
What employment could this training lead to in Malta?
Given Malta has no nuclear power generation, local opportunities are few and would mostly sit within consultancy, international organisations or firms working abroad. Employers in these roles set their own qualification requirements, and a private online qualification may or may not be accepted. Reviewing job requirements and speaking with employers will show how the training would be viewed.
Can I study this from Malta without relocating, and how is the workload structured?
Yes, the programmes are 100% online, taught in English and suitable for study from home, so you do not need a student visa. Master's programmes total 1,900 hours, postgraduate diplomas 800 hours and specialist courses 300 hours. Each student has an assigned technical tutor, and fees are payable in instalments, with possible employer sponsorship.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Classify radioactive waste by origin and activity.
Understand the chemistry and structure of nuclear glasses.
Describe industrial vitrification processes and their equipment.
Select cementation or alternative matrices according to the waste.
Assess matrix durability through standardised tests.
Prepare waste packages in line with acceptance and transport criteria.
Apply safety and regulatory requirements to conditioning plants.
Who it's for
- Radioactive waste management engineers.
- Vitrification process technicians.
- Waste package characterisation specialists.
- Nuclear materials chemists looking to work on waste matrices.
- Radiation protection technicians in treatment facilities.
- Facility safety analysts.
- Engineering or science graduates seeking to enter radioactive waste management.
What you'll work with
- IAEA GSR Part 5 (predisposal management of radioactive waste)
- Directive 2011/70/Euratom (EU framework for spent fuel and radioactive waste management)
- IAEA SSR-6 (regulations for the safe transport of radioactive material)
- IAEA SSR-5 (disposal of radioactive waste)
- IAEA GSG-1 (classification of radioactive waste)
- ASTM C1285 (Product Consistency Test for waste glasses)
- ISO 6961 (long-term leach testing of solidified radioactive waste)
- Royal Decree 102/2014 (Spanish regulation on spent fuel and radioactive waste management)
- MCNP
- MicroShield
- FactSage
- PHREEQC
8 modules
1.1Origin of waste in the nuclear fuel cycle1.2IAEA classification1.3High-, intermediate- and low-level waste1.4Fission products and minor actinides1.5Liquid reprocessing waste1.6Radiological inventory of waste1.7Decay heat and its management1.8Management strategies1.9The General Radioactive Waste Plan1.10Case study: classification of waste streams
2.1Reference borosilicate glasses2.2Phosphate glasses and alternatives2.3Structure of the glass network2.4Solubility of oxides in the melt2.5Phase separation and molybdates2.6Viscosity and electrical conductivity2.7Crystallisation and devitrification2.8Glass formulation2.9Maximum waste loading2.10Lab: melting a simulated glass
3.1The AVM and AVH processes at La Hague3.2Cold crucible melter3.3Joule-heated ceramic melters3.4Prior calcination of liquid waste3.5In-container vitrification3.6Off-gas treatment3.7Process control and sampling3.8Remote maintenance in hot cells3.9Experience of the Hanford WTP plant3.10Case study: mass balance of a melter
4.1Cementation of intermediate-level waste4.2Cement chemistry and geopolymers4.3Bituminisation of concentrates4.4Polymer encapsulation matrices4.5Compaction and supercompaction4.6Waste incineration4.7Encapsulation of ion-exchange resins4.8Synroc-type ceramics4.9Treatment of irradiated graphite4.10Practical exercise: formulation of a cementation mortar
5.1Leaching tests5.2PCT and MCC-1 tests5.3Glass alteration mechanisms5.4Long-term dissolution rates5.5Effects of self-irradiation5.6Mechanical strength of waste packages5.7Homogeneity and quality control5.8Natural analogues from ancient glasses5.9Durability models5.10Lab: static leaching test
6.1Steel and concrete containers6.2Acceptance criteria for storage6.3Non-destructive characterisation of packages6.4Segmented gamma spectrometry6.5Dose rate and surface contamination6.6Gas generation in packages6.7Transport under SSR-66.8Documentation and traceability6.9El Cabril as a reference6.10Case study: acceptance file for a waste package
7.1Radiation protection in treatment plants7.2Criticality safety7.3Hot cell design7.4Effluent management7.5Facility licensing7.6Safeguards and material control7.7Centralised interim storage7.8Deep geological disposal7.9Intergenerational ethics of waste management7.10Practical exercise: safety analysis of a hot cell
8.1Definition of the waste stream8.2Radiological and chemical characterisation8.3Selection of the matrix8.4Formulation and process parameters8.5Waste package design8.6Durability assessment8.7Safety analysis8.8Technical conclusions and improvements8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so you can combine it with your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is MCNP, MicroShield, FactSage and PHREEQC, in free, academic or evaluation versions. Practical work is based on real procedures: formulation and melting of simulated glasses, leaching tests on matrices and characterisation of waste packages for acceptance. Assessment is continuous by module plus the final project.
Standards covered: IAEA GSR Part 5, Directive 2011/70/Euratom, IAEA SSR-6, IAEA SSR-5, IAEA GSG-1, ASTM C1285, ISO 6961, Royal Decree 102/2014.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with MCNP, MicroShield, FactSage and PHREEQC, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), plus English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Environmental Sampling and Detection Techniques
Online postgraduate diploma of 800 hours in environmental sampling and detection techniques for radioactivity, structured in 8 modules covering environmental radioactivity, sampling programme design, sampling of…
Diploma in Costs and Finance in Decommissioning Projects
Online postgraduate diploma of 800 hours in costs and finance in decommissioning projects, with 8 modules covering decommissioning economics, ISDC cost estimation, funds and financing mechanisms,…
Diploma in Radionuclide Dispersion Modelling
Online postgraduate diploma of 800 hours in radionuclide dispersion modelling, structured in 8 modules covering boundary-layer meteorology, source term, Gaussian, Lagrangian and Eulerian models, aquatic dispersion,…
More in Nuclear Engineering & Nuclear Fuel Cycle Technologies
All Nuclear Engineering & Nuclear Fuel Cycle Technologies programmes → · How to apply · Fees & financing · Scholarships