Diploma in Aeroelasticity and Comfort of Footbridges and Bridges
Online postgraduate diploma of 800 hours in aeroelasticity and comfort of footbridges and bridges, structured in 8 modules covering applied structural dynamics, wind actions, aeroelastic phenomena, wind tunnel testing and CFD, pedestrian-induced vibrations, user comfort and vibration control, with an assigned technical tutor.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Apply structural dynamics to the analysis of bridges and footbridges.
Determine wind actions according to the Eurocodes.
Identify aeroelastic phenomena and their stability criteria.
Use wind tunnel testing and CFD in aerodynamic assessment.
Assess pedestrian-induced vibrations using recognised guidelines.
Check user comfort criteria.
Design vibration control measures.
Who it's for
- Structural dynamics engineers.
- Wind engineering specialists.
- Bridge engineers.
- Footbridge designers and analysts.
- CFD engineers.
- Vibration consultants.
- Engineering or science graduates looking to move into infrastructure.
What you'll work with
- EN 1991-1-4 (Eurocode 1 — wind actions)
- EN 1990 Annex A2 (Eurocode — basis of design, application for bridges)
- ISO 10137 (serviceability of buildings and walkways against vibrations)
- EN 1991-2 (Eurocode 1 — traffic loads on bridges, including pedestrian loads)
- Sétra footbridge guide (2006) (assessment of vibrational behaviour of footbridges under pedestrian loading)
- HiVoSS (human-induced vibrations of steel structures — footbridge design guide)
- ISO 2631-2 (human exposure to whole-body vibration in buildings)
- IAP-11 (Spanish code on actions for road bridges)
- Ansys Fluent
- OpenFOAM
- SOFiSTiK
- ARTeMIS Modal
- MATLAB
8 modules
1.1Single-degree-of-freedom systems1.2Multi-degree-of-freedom systems and modes1.3Damping and its estimation1.4Numerical modal analysis1.5Frequency response1.6Harmonic and random excitations1.7Resonance in lightweight structures1.8Time-domain integration1.9Modal mass and participation factors1.10Workshop: calculating the modes of a footbridge
2.1Atmospheric boundary layer2.2Turbulence and wind spectra2.3Wind according to EN 1991-1-42.4Aerodynamic coefficients of sections2.5Static wind forces2.6Turbulent buffeting response2.7Topographic effects on wind2.8Wind during construction stages2.9Wind maps and basic wind velocity2.10Practical exercise: wind loads on a deck
3.1Vortex shedding3.2Strouhal number3.3Transverse galloping of sections3.4Classical and torsional flutter3.5Torsional divergence of the deck3.6Scanlan flutter derivatives3.7Lessons from the Tacoma Narrows Bridge3.8Vibrations of stay cables and hangers3.9Aeroelastic stability criteria3.10Case study: critical flutter velocity
4.1Boundary layer wind tunnel4.2Sectional model testing4.3Full aeroelastic models4.4Measuring aerodynamic derivatives4.5CFD in bridge aerodynamics4.6LES and RANS simulations4.7Validation between CFD and wind tunnel4.8Aerodynamic modifications of the section4.9Deck deflectors and fairings4.10Lab: CFD of a deck section
5.1Walking, running and jumping loads5.2Critical pedestrian frequencies5.3Lateral synchronisation and the Millennium effect5.4Sétra and HiVoSS guidelines5.5Comfort classes5.6Pedestrian density5.7Rhythmic jumping and vandalism5.8Crowd loading models5.9Acceleration criteria5.10Practical exercise: comfort check according to Sétra
6.1Human perception of vibrations6.2Serviceability criteria according to ISO 101376.3Vertical and lateral accelerations6.4Comfort on road and railway bridges6.5Vibrations in stations and buildings6.6Combined noise and vibration6.7Criteria by structural typology6.8On-site measurements6.9Handling user complaints6.10Case study: diagnosis of a lively footbridge
7.1Tuned mass dampers7.2Fluid viscous dampers7.3Stay cable dampers7.4Active and semi-active control7.5Damper design and tuning7.6Damper maintenance7.7Structural stiffening as an alternative7.8Operational modal identification7.9Comfort monitoring7.10Workshop: designing a damper for a footbridge
8.1Selecting the structure8.2Dynamic model of the structure8.3Wind action analysis8.4Aeroelastic analysis of the section8.5Pedestrian traffic analysis8.6Comfort assessment8.7Vibration control measures8.8Dynamic testing plan8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
Training is 100% online on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within the intake, so it can be combined with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Ansys Fluent, OpenFOAM, SOFiSTiK, ARTeMIS Modal and MATLAB, in free, academic or evaluation versions. Practical work is based on real procedures: wind tunnel tests of deck sections, vibration measurements on footbridges and design of tuned mass dampers. Assessment is continuous by module, plus the final project.
Standards covered: EN 1991-1-4, EN 1990 Annex A2, ISO 10137, EN 1991-2, Sétra footbridge guide (2006), HiVoSS, ISO 2631-2, IAP-11
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with Ansys Fluent, OpenFOAM, SOFiSTiK, ARTeMIS Modal and MATLAB, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Seismic Rehabilitation and Vulnerability
Online postgraduate diploma of 800 hours in seismic retrofitting and vulnerability. 8 modules covering seismic hazard, behaviour of existing buildings, vulnerability assessment, non-linear analysis, retrofitting techniques,…
Diploma in Urban Geotechnics for Deep Excavations
Online postgraduate diploma of 800 hours in urban geotechnics for deep excavations, structured in 8 modules covering urban excavation constraints, earth pressures and stability, retaining systems,…
Postgraduate Diploma in Rail Welding, Switches and Maintenance
Online Postgraduate Diploma of 800 hours in Rail Welding, Switches and Maintenance. 8 modules covering EN 13674-1 (Vignole rails), EN 14730-1 (aluminothermic rail welding) and AutoCAD.…
More in Civil, Rail & Smart Cities
All Civil, Rail & Smart Cities programmes → · How to apply · Fees & financing · Scholarships