Diploma in Radioactive Waste Classification
Online postgraduate diploma of 800 hours in radioactive waste classification, structured in 8 modules covering the nature of radioactive waste, the IAEA classification scheme, national systems, waste characterisation, acceptance criteria, clearance and classification-based management, with an assigned technical tutor.
Diploma in Radioactive Waste Classification — studying from Canada
Canada is a global leader in nuclear technology, most notably through CANDU reactor design and the development of medical isotopes. Ontario operates the largest nuclear fleet in the country, with major facilities at Pickering, Darlington and Bruce, while Atomic Energy of Canada Limited leads reactor research at Chalk River. The Canadian Nuclear Safety Commission regulates all nuclear activity. Engineers work on reactor design, fuel cycle technologies, decommissioning and radiation protection.
Fees for Canada: C$1,400 (Canadian dollar), with instalments and employer sponsorship available.
Relevant bodies in Canada
Typical roles
Questions from Canada
Is this programme recognised by professional bodies in Canada for nuclear engineering?
SEIUM's qualifications are private, not official state degrees, and carry no national accreditation in Canada. Nuclear activities are regulated by the Canadian Nuclear Safety Commission, and professional engineering titles are provincially regulated. Nuclear roles often require specific licences or clearances, which a private qualification does not provide. Confirm with employers or the regulator.
Could this qualification help with nuclear career opportunities in Canada?
Canadian nuclear operators, utilities, fuel cycle firms and regulators' supplier networks employ engineers, but they set their own criteria. Many nuclear roles prioritise experience, security clearances and regulator-recognised training. The programme can add technical depth to your profile, but it does not guarantee entry or advancement in this tightly regulated field.
Can I study this online from Canada, and what is the workload?
Yes, the programme is 100% online and taught in English, and no student visa is required if you study from home. Specialist courses are 300 hours, postgraduate diplomas 800 hours and master's programmes 1,900 hours. Fees are payable in instalments, employer sponsorship is possible, and you receive an assigned technical tutor for guidance.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand the origin and properties of radioactive waste.
Apply the IAEA classification scheme.
Understand national classification systems.
Characterise waste using destructive and non-destructive methods.
Verify compliance with waste acceptance criteria.
Apply clearance criteria.
Propose management routes based on classification.
Who it's for
- Waste characterisation technicians
- Radioactive waste management technicians
- Radiation protection specialists
- Radiochemistry laboratory technicians
- Waste package quality inspectors
- Nuclear consultants
- Engineering or science graduates looking to move into radioactive waste management
What you'll work with
- IAEA GSG-1 (classification of radioactive waste)
- IAEA GSR Part 5 (predisposal management of radioactive waste)
- Directive 2011/70/Euratom (EU framework for spent fuel and radioactive waste management)
- Royal Decree 102/2014 (Spanish regulation on spent fuel and radioactive waste management)
- Order ECO/1449/2003 (Spanish clearance of solid materials with low radioactive content)
- ISO 21238 (scaling factor method for waste package activity)
- IAEA RS-G-1.7 (concepts of exclusion, exemption and clearance)
- Directive 2013/59/Euratom (EU basic safety standards for radiation protection)
- ISOCS/LabSOCS
- MicroShield
- Genie 2000
- Microsoft Excel
8 modules
1.1Definition of radioactive waste1.2Radionuclides and half-lives1.3Activity and activity concentration1.4Heat generation1.5Sources of waste1.6Nuclear fuel cycle waste1.7Waste from medical and industrial applications1.8Decommissioning waste1.9National waste inventory1.10Case study: inventory of a nuclear power plant
2.1IAEA Guide GSG-12.2Exempt waste category2.3Very short-lived waste2.4Very low-level waste2.5Low-level waste2.6Intermediate-level waste2.7High-level waste2.8Relationship with disposal options2.9Limitations of the scheme2.10Practical exercise: classifying waste streams
3.1Spanish classification: LILW (RBMA), VLLW (RBBA) and HLW (RAA)3.2Criteria of the national waste management company3.3The El Cabril facility3.4Classification in France3.5Classification in the United Kingdom3.6Classification in the United States3.7International comparison of schemes3.8European harmonisation of criteria3.9National waste inventories3.10Workshop: comparison of classification schemes
4.1Characterisation objectives4.2Destructive analysis methods4.3Non-destructive methods4.4Gamma spectrometry of waste packages4.5Measurement of alpha emitters4.6Difficult-to-measure radionuclides4.7Scaling factors4.8Representative sampling design4.9Characterisation uncertainty4.10Laboratory: scaling factors for waste
5.1The concept of waste acceptance criteria5.2Activity limits per radionuclide5.3Physical and chemical requirements5.4Package requirements5.5Package documentation5.6Quality control5.7Compliance verification5.8Management of non-conformities5.9Management of legacy packages5.10Practical exercise: verifying a package against acceptance criteria
6.1The concept of clearance6.2Clearance levels6.3Ministerial order on clearance6.4Measurement for clearance6.5Clearance of metallic materials6.6Construction materials6.7Management of NORM materials6.8Recycling of cleared materials6.9Records and control6.10Case study: clearance of metal scrap
7.1Treatment of low-level waste7.2Cement conditioning7.3Compaction and supercompaction7.4Waste incineration7.5Vitrification of high-level waste7.6Interim storage of packages7.7Disposal options7.8Waste information systems7.9Management optimisation7.10Workshop: management route for a waste stream
8.1Selection of the facility8.2Identification of waste streams8.3Waste characterisation8.4Application of the classification8.5Applicable acceptance criteria8.6Management proposal8.7Conclusions of the analysis8.8Management recommendations8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
The programme is delivered 100% online on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so it fits alongside your job.
Each module combines theory, guided reading of the original standards and applied exercises. You work with ISOCS/LabSOCS, MicroShield, Genie 2000 and Microsoft Excel in free, academic or evaluation versions. Practical work is based on real procedures for gamma spectrometry of packages, scaling factor calculation and verification against acceptance criteria. Assessment is continuous by module, plus a final capstone project.
Standards covered: IAEA GSG-1, IAEA GSR Part 5, Council Directive 2011/70/Euratom, Royal Decree 102/2014, Order ECO/1449/2003 on clearance, ISO 21238, IAEA RS-G-1.7, Council Directive 2013/59/Euratom.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with ISOCS/LabSOCS, MicroShield, Genie 2000 and Microsoft Excel, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Environmental Sampling and Detection Techniques
Online postgraduate diploma of 800 hours in environmental sampling and detection techniques for radioactivity, structured in 8 modules covering environmental radioactivity, sampling programme design, sampling of…
Diploma in Costs and Finance in Decommissioning Projects
Online postgraduate diploma of 800 hours in costs and finance in decommissioning projects, with 8 modules covering decommissioning economics, ISDC cost estimation, funds and financing mechanisms,…
Diploma in Multimodal Transport of Nuclear Materials
Online postgraduate diploma of 800 hours in multimodal transport of nuclear materials, structured in 8 modules covering fuel cycle logistics, the modal regulatory framework, multimodal planning,…
More in Nuclear Engineering & Nuclear Fuel Cycle Technologies
All Nuclear Engineering & Nuclear Fuel Cycle Technologies programmes → · How to apply · Fees & financing · Scholarships