Diploma in Environmental Sampling and Detection Techniques
Online postgraduate diploma of 800 hours in environmental sampling and detection techniques for radioactivity, structured in 8 modules covering environmental radioactivity, sampling programme design, sampling of air, water, soil and biota, detection and measurement techniques, in situ measurements and data quality, with an assigned technical tutor.
Diploma in Environmental Sampling and Detection Techniques — studying from Canada
Canada is a global leader in nuclear technology, most notably through CANDU reactor design and the development of medical isotopes. Ontario operates the largest nuclear fleet in the country, with major facilities at Pickering, Darlington and Bruce, while Atomic Energy of Canada Limited leads reactor research at Chalk River. The Canadian Nuclear Safety Commission regulates all nuclear activity. Engineers work on reactor design, fuel cycle technologies, decommissioning and radiation protection.
Fees for Canada: C$2,790 (Canadian dollar), with instalments and employer sponsorship available.
Relevant bodies in Canada
Typical roles
Questions from Canada
Is this programme recognised by professional bodies in Canada for nuclear engineering?
SEIUM's qualifications are private, not official state degrees, and carry no national accreditation in Canada. Nuclear activities are regulated by the Canadian Nuclear Safety Commission, and professional engineering titles are provincially regulated. Nuclear roles often require specific licences or clearances, which a private qualification does not provide. Confirm with employers or the regulator.
Could this qualification help with nuclear career opportunities in Canada?
Canadian nuclear operators, utilities, fuel cycle firms and regulators' supplier networks employ engineers, but they set their own criteria. Many nuclear roles prioritise experience, security clearances and regulator-recognised training. The programme can add technical depth to your profile, but it does not guarantee entry or advancement in this tightly regulated field.
Can I study this online from Canada, and what is the workload?
Yes, the programme is 100% online and taught in English, and no student visa is required if you study from home. Specialist courses are 300 hours, postgraduate diplomas 800 hours and master's programmes 1,900 hours. Fees are payable in instalments, employer sponsorship is possible, and you receive an assigned technical tutor for guidance.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand radioactivity in the environment.
Design environmental sampling programmes.
Apply sampling techniques for air, water, soil and biota.
Use detection and measurement techniques.
Carry out in situ measurements and radiological mapping.
Assure the quality of measurements.
Interpret environmental radiological results.
Who it's for
- Radiological laboratory technicians
- Environmental monitoring technicians
- Radiochemists
- Radiation protection technicians
- Sampling technicians
- Environmental data analysts
- Engineering or science graduates looking to move into environmental radiological monitoring
What you'll work with
- ISO/IEC 17025 (competence of testing and calibration laboratories)
- ISO 11929 (characteristic limits for measurements of ionising radiation)
- ISO 18589 (measurement of radioactivity in soil)
- ISO 9696 (gross alpha activity in water)
- ISO 10703 (gamma-emitting radionuclides in water by high-resolution spectrometry)
- ISO 5667-1 (design of water sampling programmes)
- Directive 2013/59/Euratom (EU basic safety standards for radiation protection)
- CSN Safety Guide 7.7 (Spanish Nuclear Safety Council guide on environmental radiological monitoring)
- Genie 2000
- ISOCS/LabSOCS
- GammaVision
- Python with SciPy
- QGIS
8 modules
1.1Natural and artificial radioactivity1.2Radon and its progeny1.3Radionuclides of environmental interest1.4Transfer pathways to humans1.5Release sources1.6The Chernobyl and Fukushima accidents1.7Global radioactive fallout1.8NORM materials in industry1.9Background levels1.10Case study: radiological background of a region
2.1Sampling objectives2.2Statistical sampling design2.3Selection of matrices2.4Sampling points2.5Sampling frequencies2.6Sampling quality control2.7Chain of custody2.8Safety during sampling2.9Field documentation2.10Practical exercise: sampling plan for an area
3.1Aerosol samplers3.2Iodine sampling with activated charcoal3.3Tritium and carbon-14 sampling3.4Radon measurement3.5Deposition sampling3.6Filters and efficiency3.7Calculation of the sampled volume3.8Transport and preservation3.9Interferences and their correction3.10Laboratory: aerosol sampling
4.1Surface water sampling4.2Groundwater sampling4.3Sediment sampling4.4Soil sampling4.5Vegetation sampling4.6Food sampling4.7Use of bioindicators4.8Sample preparation4.9Sample preservation4.10Practical exercise: soil sampling and preparation
5.1Gamma spectrometry with germanium detectors5.2Alpha spectrometry with semiconductor detectors5.3Gross beta counting5.4Liquid scintillation counting5.5Environmental thermoluminescent dosimetry5.6Dose rate monitors5.7ICP-MS mass spectrometry5.8Separation radiochemistry5.9Detection limits5.10Laboratory: gamma spectrometry of a sample
6.1In situ gamma spectrometry6.2Airborne measurements by helicopter6.3Measurements with drones6.4Measurement vehicles6.5Production of radiological maps6.6Early warning systems6.7Automatic surveillance networks6.8Field calibration6.9Interpretation of results6.10Practical exercise: radiological mapping with a portable detector
7.1ISO/IEC 170257.2Measurement uncertainty7.3Detection limits according to ISO 119297.4Participation in intercomparisons7.5Reference materials7.6Method validation7.7Statistical treatment of results7.8Environmental databases7.9Reporting of results7.10Workshop: calculation of detection limits
8.1Definition of the objective8.2Sampling design8.3Selection of techniques8.4Quality plan8.5Analysis of results8.6Radiological interpretation of results8.7Conclusions of the study8.8Recommendations of the study8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
The programme is delivered 100% online on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so it fits alongside your job.
Each module combines theory, guided reading of the original standards and applied exercises. You work with Genie 2000, ISOCS/LabSOCS, GammaVision, Python with SciPy and QGIS in free, academic or evaluation versions. Practical work is based on real procedures for high-resolution gamma spectrometry, aerosol sampling and radiological mapping. Assessment is continuous by module, plus a final capstone project.
Standards covered: ISO/IEC 17025, ISO 11929, ISO 18589 (soils), ISO 9696, ISO 10703, ISO 5667-1, Council Directive 2013/59/Euratom, CSN Safety Guide 7.7.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with Genie 2000, ISOCS/LabSOCS, GammaVision, Python with SciPy and QGIS, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Materials Management during D&D
Online postgraduate diploma of 800 hours in materials management during decommissioning and dismantling (D&D), structured in 8 modules covering decommissioning materials, characterisation, management routes, clearance, logistics…
Diploma in Radionuclide Dispersion Modelling
Online postgraduate diploma of 800 hours in radionuclide dispersion modelling, structured in 8 modules covering boundary-layer meteorology, source term, Gaussian, Lagrangian and Eulerian models, aquatic dispersion,…
Diploma in Advanced Cutting and Decontamination Techniques
Online postgraduate diploma of 800 hours in advanced cutting and decontamination techniques. 8 modules covering decontamination in decommissioning, chemical, mechanical and physical decontamination, thermal and mechanical…
More in Nuclear Engineering & Nuclear Fuel Cycle Technologies
All Nuclear Engineering & Nuclear Fuel Cycle Technologies programmes → · How to apply · Fees & financing · Scholarships