Diploma in ITAR/EAR and Technology Classification (ECCN/USML)
Online postgraduate diploma of 800 hours in ITAR/EAR and technology classification (ECCN/USML). 8 modules covering the US export control system, ITAR and the USML, the EAR and the CCL, classification methodology, re-exports and de minimis, licences and authorisations and compliance and audit, with an assigned technical tutor.
Diploma in ITAR/EAR and Technology Classification (ECCN/USML) — studying from Canada
Canada's automotive industry is concentrated in Ontario, particularly around Windsor, Oshawa, Brampton and St. Catharines, with assembly plants and a dense supplier network. Companies such as General Motors Canada, Stellantis Canada and Toyota Canada operate production facilities, supported by a strong parts sector. Motorsport activity is present through national series and circuits such as Canadian Tire Motorsport Park and Mosport. Engineers work on vehicle design, powertrain development, manufacturing engineering and supplier quality.
Fees for Canada: C$1,700 (Canadian dollar), with instalments and employer sponsorship available.
Relevant bodies in Canada
Typical roles
Questions from Canada
Which Canadian bodies recognise automotive engineering qualifications?
Automotive engineers in Canada often hold Professional Engineer (P.Eng.) licences from provincial associations such as Professional Engineers Ontario, which regulate the title 'engineer'. SEIUM is a private institute, and its qualifications are not official state degrees and are not accredited by any national body, so they do not confer P.Eng. status. Whether an employer or other body recognises the training is their decision, so confirm this before you enrol.
Where in Canada would automotive or motorsport training be useful to employers?
Canada has automotive manufacturing centred in Ontario, with suppliers across the country, and a range of motorsport and performance engineering businesses. Employers in these areas typically assess candidates on skills, portfolios and practical experience. A SEIUM final project can document your work, but how much weight a private qualification carries is up to each employer, so ask them directly.
How does the workload and funding work for someone employed in Canada?
Programmes are fully online, so you can study from anywhere, including outside Canadian time zones if needed, but schedules should be planned around your work. Hours range from 300 for specialist courses to 1,900 for master's programmes. Fees can be paid in instalments, and employer sponsorship is possible. Teaching is in English, and an assigned technical tutor supports you throughout.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand the US export control system.
Classify items on the USML.
Assign ECCNs in line with the CCL.
Apply a documented classification methodology.
Assess re-exports and de minimis content.
Manage licences and authorisations.
Implement compliance and audit programmes.
Who it's for
- Export classification specialists assigning ECCNs and USML categories.
- ITAR compliance managers in aerospace and defence companies.
- Export licensing managers preparing BIS and DDTC applications.
- Foreign trade auditors reviewing classification and licensing records.
- Product engineers who take on classification responsibilities.
- Export control consultants advising European companies with US content.
- Engineering or science graduates looking to move into aerospace and defence.
What you'll work with
- International Traffic in Arms Regulations (22 CFR 120-130) (US controls on defence articles and services)
- Export Administration Regulations (15 CFR 730-774) (US controls on dual-use items)
- Export Control Reform Act of 2018 (statutory basis of US export controls)
- United States Munitions List (22 CFR 121) (ITAR control list)
- Commerce Control List (15 CFR 774, Supplement 1) (EAR control list)
- Regulation (EU) 2021/821 (EU dual-use regime)
- Wassenaar Arrangement (multilateral export control regime)
- SAP GTS
- Descartes Visual Compliance
- BIS SNAP-R
- DDTC DECCS
8 modules
1.1Export Control Reform Act of 20181.2Department of Commerce and BIS1.3Department of State and DDTC1.4EAR dual-use regulations1.5ITAR regulations on defence articles1.6OFAC and sanctions1.7Jurisdiction and how it is determined1.8Extraterritorial reach of the controls1.9Enforcement agencies1.10Case study: jurisdiction determination for a component
2.1Structure of the USML2.2Categories I to XXI2.3Defence articles and services2.4Control of technical data2.5Order of review2.6"Specially designed" criteria2.7Commodity Jurisdiction request2.8Registration with DDTC2.9ITAR exemptions2.10Workshop: USML classification of an optical system
3.1Structure of the Commerce Control List3.2Categories and product groups3.3Structure of ECCNs3.4Reasons for control3.5600 series and 9x5153.6Items classified as EAR993.7Technical notes and definitions3.8Country Chart3.9Classification of software and encryption3.10Practical exercise: ECCN classification of an electronic board
4.1"Specially designed" analysis4.2Review of technical parameters4.3Decision trees4.4Classification of technology4.5Classification of parts and components4.6Documented and traceable self-classification4.7CCATS requests to BIS4.8Management of classifications in the ERP4.9Common errors and prevention4.10Lab: classification decision tree
5.1De minimis rule5.2Calculation of controlled content5.3Foreign direct product rule5.4Re-exports from Europe5.5In-country transfers5.6Implications for European subsidiaries5.7Contracts with compliance clauses5.8Management of US suppliers5.9Penalty cases against foreign companies5.10Case study: de minimis calculation for a European system
6.1EAR licence exceptions6.2BIS licences6.3DSP-5 licences and TAA agreements6.4Manufacturing licence agreements (MLA)6.5Conditions and provisos6.6Management of active licences6.7Usage reporting6.8Deemed exports to foreign personnel6.9Technology control plans6.10Workshop: licence application for a technical service
7.1Compliance programme under BIS guidelines7.2Mandatory records and their retention7.3Internal compliance audits7.4Voluntary disclosure procedure7.5Civil and criminal penalties7.6Benchmark cases7.7Staff training7.8Visitor control7.9Compliance indicators7.10Practical exercise: audit of the classifications in a product catalogue
8.1Selection of products8.2Jurisdiction determination8.3Detailed product classification8.4Re-export analysis8.5Licensing plan8.6Technology control plan8.7Compliance programme8.8Conclusions and areas for improvement8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
Training is 100% online on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within the intake, so the programme fits around your job.
Each module combines theory, guided reading of the original regulations and applied exercises. The working software is SAP GTS, Descartes Visual Compliance, BIS SNAP-R and DDTC DECCS, in free, academic or evaluation versions. Exercises are based on real procedures: ITAR or EAR jurisdiction determination, ECCN classification of electronic components and de minimis calculation for re-exports. Assessment is continuous by module, plus the final capstone project.
Standards covered: International Traffic in Arms Regulations (22 CFR 120-130), Export Administration Regulations (15 CFR 730-774), Export Control Reform Act of 2018, United States Munitions List (22 CFR 121), Commerce Control List (15 CFR 774, Supplement 1), Regulation (EU) 2021/821, Wassenaar Arrangement.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with SAP GTS, Descartes Visual Compliance, BIS SNAP-R and DDTC DECCS, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a suitable computer and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in MLIT/JASIC Japan: Processes, Documentation and Testing
Online postgraduate diploma of 800 hours in MLIT/JASIC Japan: processes, documentation and testing. 8 modules covering the Japanese regulatory system, type designation, NTSEL and JASIC, Japan-specific…
Diploma in HV and Battery Safety: UN R100/IEC
Online postgraduate diploma of 800 hours in high-voltage and battery safety. 8 modules covering HV vehicle systems, UN Regulation No. 100, battery testing, IEC and SAE…
Postgraduate Diploma in Balance Testing and Blockage Corrections
Online 800-hour Postgraduate Diploma in Balance Testing and Blockage Corrections. 8 modules covering SAE J2071, SAE J2084 and MATLAB. Dedicated tutor and open enrolment.
More in Automotive & Motorsport
All Automotive & Motorsport programmes → · How to apply · Fees & financing · Scholarships