Course on International Governance of Nuclear Energy
Online course of 300 h in International Governance of Nuclear Energy. 6 modules covering Statute of the International Atomic Energy Agency (1956), Treaty on the Non-Proliferation of Nuclear Weapons (NPT, 1968) and Advanced Excel. Dedicated tutor and enrolment open.
Course on International Governance of Nuclear Energy — studying from Canada
Canada is a global leader in nuclear technology, most notably through CANDU reactor design and the development of medical isotopes. Ontario operates the largest nuclear fleet in the country, with major facilities at Pickering, Darlington and Bruce, while Atomic Energy of Canada Limited leads reactor research at Chalk River. The Canadian Nuclear Safety Commission regulates all nuclear activity. Engineers work on reactor design, fuel cycle technologies, decommissioning and radiation protection.
Fees for Canada: C$1,160 (Canadian dollar), with instalments and employer sponsorship available.
Relevant bodies in Canada
Typical roles
Questions from Canada
Is this programme recognised by professional bodies in Canada for nuclear engineering?
SEIUM's qualifications are private, not official state degrees, and carry no national accreditation in Canada. Nuclear activities are regulated by the Canadian Nuclear Safety Commission, and professional engineering titles are provincially regulated. Nuclear roles often require specific licences or clearances, which a private qualification does not provide. Confirm with employers or the regulator.
Could this qualification help with nuclear career opportunities in Canada?
Canadian nuclear operators, utilities, fuel cycle firms and regulators' supplier networks employ engineers, but they set their own criteria. Many nuclear roles prioritise experience, security clearances and regulator-recognised training. The programme can add technical depth to your profile, but it does not guarantee entry or advancement in this tightly regulated field.
Can I study this online from Canada, and what is the workload?
Yes, the programme is 100% online and taught in English, and no student visa is required if you study from home. Specialist courses are 300 hours, postgraduate diplomas 800 hours and master's programmes 1,900 hours. Fees are payable in instalments, employer sponsorship is possible, and you receive an assigned technical tutor for guidance.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Describe the international institutional architecture of the nuclear sector.
Analyse the legal instruments on nuclear safety and their peer review mechanism.
Explain the IAEA safeguards system and the Additional Protocol.
Compare the nuclear security and waste management regimes.
Interpret the conventions on third-party liability for nuclear damage.
Assess the effectiveness of international nuclear cooperation.
Prepare a governance analysis of an international nuclear case.
Who it's for
- International relations analyst in nuclear energy looking to specialise in International Governance of Nuclear Energy.
- International affairs officer at a regulator looking to specialise in International Governance of Nuclear Energy.
- Non-proliferation adviser looking to specialise in International Governance of Nuclear Energy.
- International nuclear law specialist looking to specialise in International Governance of Nuclear Energy.
- Multilateral organisations consultant looking to specialise in International Governance of Nuclear Energy.
- Energy governance researcher looking to specialise in International Governance of Nuclear Energy.
- Engineering or science graduates looking to move into international organisations.
What you'll work with
- Statute of the International Atomic Energy Agency (1956)
- Treaty on the Non-Proliferation of Nuclear Weapons (NPT, 1968)
- Convention on Nuclear Safety (1994)
- Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management (1997)
- Convention on the Physical Protection of Nuclear Material and its 2005 Amendment
- INFCIRC/153 and INFCIRC/540 (safeguards and Additional Protocol)
- Convention on Early Notification of a Nuclear Accident (1986)
- Convention on Supplementary Compensation for Nuclear Damage (1997)
6 modules · 300 h
1.1Atoms for Peace and the origins of the IAEA1.2IAEA Statute and governance structure1.3OECD Nuclear Energy Agency1.4Euratom and the 1957 Treaty1.5WANO and cooperation between operators1.6The World Nuclear Association and industry stakeholders1.7National regulators and networks such as WENRA1.8Regional networks: ENSREG, ANNuR and FNRBA1.9The role of the UN and the Security Council1.10Case study: map of global nuclear governance
2.1The Convention on Nuclear Safety2.2CNS peer review meetings2.3IAEA safety standards: SF-1 and the GSR series2.4Vienna Declaration on Nuclear Safety2.5IRRS and OSART missions2.6European stress tests after Fukushima2.7Nuclear Safety Directive 2014/87/Euratom2.8Early Notification and Assistance Conventions2.9The INES scale and event communication2.10Practical exercise: analysing a national report to the CNS
3.1The Non-Proliferation Treaty and its pillars3.2Comprehensive safeguards agreements INFCIRC/1533.3Additional Protocol INFCIRC/5403.4Nuclear-weapon-free zones3.5Nuclear Suppliers Group Guidelines3.6Joint Comprehensive Plan of Action with Iran3.7Comprehensive Test-Ban Treaty3.8Treaty on the Prohibition of Nuclear Weapons3.9NPT Review Conferences3.10Case study: safeguards implementation report
4.1The CPPNM and its 2005 amendment4.2Security Council Resolution 15404.3IAEA Nuclear Security Series4.4Joint Convention on waste management4.5Waste Directive 2011/70/Euratom4.6Multinational repositories and the ethical debate4.7International transport of radioactive material4.8Illicit trafficking and the ITDB database4.9Nuclear computer security according to NSS 174.10Workshop: comparing national waste policies
5.1Vienna Convention on Civil Liability5.2Paris Convention and the 2004 Protocol5.3Convention on Supplementary Compensation5.4Section 123 nuclear cooperation agreements5.5IAEA Low-Enriched Uranium Bank5.6IAEA Technical Cooperation Programme5.7The Milestones Approach for newcomer countries5.8SMR regulatory harmonisation5.9Nuclear energy at the COPs and climate finance5.10Case study: entry of a newcomer country
6.1Selecting the governance problem6.2Mapping the applicable legal instruments6.3Analysis of actors and interests6.4Assessing effectiveness and gaps6.5Comparing reform scenarios6.6Formulating recommendations6.7Writing the policy report6.8Summary of conclusions6.9Report and presentation6.10Final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable materials, recorded classes and a dedicated technical tutor. No fixed timetable: students progress at their own pace within the intake period, making it easy to combine with work.
Each module combines theory, guided reading of the original standards and applied exercises. The software used is Excel avanzado, NVivo, Tableau, Zotero, in free, academic or trial versions. Testing is studied through real procedures from comparative analysis of institutional frameworks, simulation of a Convention on Nuclear Safety review meeting, international verification case studies. Assessment is continuous for each module, plus a final capstone project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Describe the international institutional architecture of the nuclear sector.
Analyse the legal instruments on nuclear safety and their peer review mechanism.
Explain the IAEA safeguards system and the Additional Protocol.
Compare the nuclear security and waste management regimes.
Interpret the conventions on third-party liability for nuclear damage.
Where this takes you
Requirements
- No previous qualification is required.
- An internet connection and a computer able to run the programme software.
- A level of English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 300 hours spread over 3 to 5 months. That is an average of 10 to 15 hours per week, compatible with a full-time job.
You will work with advanced Excel, NVivo, Tableau, Zotero. Free, academic or trial versions are used, and your tutor will point out a free alternative where one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the capstone project. It is SEIUM's own qualification, not an official state-accredited degree.
Yes. Modules passed in a course or postgraduate diploma in the same area are recognised in the higher programme. Check the recognition policy when you enrol.
Related programmes
Radiation Protection Audit Methodologies Course
300-hour online course in radiation protection audit methodologies. 6 modules covering ISO 19011 (guidelines for auditing management systems), IAEA GSR Part 3 (radiation protection and safety…
Course in Nuclear Environmental Impact Assessment
Online course of 300 h in nuclear environmental impact assessment. 6 modules covering Directive 2011/92/EU as amended by Directive 2014/52/EU (environmental impact assessment), Law 21/2013 on…
Course on the Ethics of Replacing Humans with Robots
Online course of 300 h in the Ethics of Replacing Humans with Robots. 6 modules covering ISO 10218-1 and 10218-2 (safety of industrial robots), Regulation (EU)…
More in Nuclear Engineering & Nuclear Fuel Cycle Technologies
All Nuclear Engineering & Nuclear Fuel Cycle Technologies programmes → · How to apply · Fees & financing · Scholarships