Course in Nuclear Environmental Impact Assessment
Online course of 300 h in nuclear environmental impact assessment. 6 modules covering Directive 2011/92/EU as amended by Directive 2014/52/EU (environmental impact assessment), Law 21/2013 on environmental assessment and QGIS. Assigned tutor and open enrolment.
Course in Nuclear Environmental Impact Assessment — studying from Canada
Canada is a global leader in nuclear technology, most notably through CANDU reactor design and the development of medical isotopes. Ontario operates the largest nuclear fleet in the country, with major facilities at Pickering, Darlington and Bruce, while Atomic Energy of Canada Limited leads reactor research at Chalk River. The Canadian Nuclear Safety Commission regulates all nuclear activity. Engineers work on reactor design, fuel cycle technologies, decommissioning and radiation protection.
Fees for Canada: C$1,160 (Canadian dollar), with instalments and employer sponsorship available.
Relevant bodies in Canada
Typical roles
Questions from Canada
Is this programme recognised by professional bodies in Canada for nuclear engineering?
SEIUM's qualifications are private, not official state degrees, and carry no national accreditation in Canada. Nuclear activities are regulated by the Canadian Nuclear Safety Commission, and professional engineering titles are provincially regulated. Nuclear roles often require specific licences or clearances, which a private qualification does not provide. Confirm with employers or the regulator.
Could this qualification help with nuclear career opportunities in Canada?
Canadian nuclear operators, utilities, fuel cycle firms and regulators' supplier networks employ engineers, but they set their own criteria. Many nuclear roles prioritise experience, security clearances and regulator-recognised training. The programme can add technical depth to your profile, but it does not guarantee entry or advancement in this tightly regulated field.
Can I study this online from Canada, and what is the workload?
Yes, the programme is 100% online and taught in English, and no student visa is required if you study from home. Specialist courses are 300 hours, postgraduate diplomas 800 hours and master's programmes 1,900 hours. Fees are payable in instalments, employer sponsorship is possible, and you receive an assigned technical tutor for guidance.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Describe the regulatory framework for the environmental assessment of nuclear facilities.
Characterise the physical, biotic and socio-economic environment of a site.
Assess radiological impacts on the public and biota.
Identify and assess non-radiological impacts.
Integrate the life cycle, waste and decommissioning into the assessment.
Propose preventive, corrective and monitoring measures.
Write an environmental impact study for a nuclear facility.
Who it's for
- Environmental impact assessment consultant who wants to specialise in Nuclear Environmental Impact Assessment.
- Environmental technician in nuclear facilities who wants to specialise in Nuclear Environmental Impact Assessment.
- Radioecologist who wants to specialise in Nuclear Environmental Impact Assessment.
- Geographic information systems technician who wants to specialise in Nuclear Environmental Impact Assessment.
- Government environmental assessor who wants to specialise in Nuclear Environmental Impact Assessment.
- Environmental permitting manager who wants to specialise in Nuclear Environmental Impact Assessment.
- Engineering or science graduates seeking to enter environmental consultancy.
What you'll work with
- Directive 2011/92/EU as amended by Directive 2014/52/EU (environmental impact assessment)
- Law 21/2013 on environmental assessment
- IAEA GSG-10 (prospective assessment of environmental radiological impact)
- Espoo Convention (EIA in a transboundary context)
- ICRP 124 (protection of the environment)
- Euratom Treaty (Articles 35 to 37)
- ISO 14001 (environmental management)
6 modules · 300 h
1.1Directive 2011/92/EU and its amendment 2014/52/EU1.2Law 21/2013 on environmental assessment in Spain1.3Article 37 of the Euratom Treaty1.4Espoo Convention and transboundary effects1.5EIA process: scoping, study and declaration1.6Strategic environmental assessment of nuclear plans1.7NRC requirements and NUREG-15551.8Projects subject to assessment: power plants, stores and mines1.9Public participation and the Aarhus Convention1.10Case study: analysis of the EIA of an ATC
2.1Site meteorology2.2Surface and groundwater hydrology2.3Geology and seismicity2.4Ecology and protected areas2.5Demography and land use2.6Pre-operational radiological background2.7Food chain and local habits2.8Cultural heritage and landscape2.9Environmental baseline2.10Practical: meteorological characterisation using station data
3.1Gaseous emissions and liquid effluents3.2Gaussian atmospheric dispersion models3.3Water transport models3.4Exposure pathways and reference group3.5Calculation of doses to the public3.6Biota and the ERICA system3.7Dose limits and constraints3.8Accidents in environmental assessment3.9Environmental radiological monitoring (PVRA)3.10Laboratory: Gaussian dispersion and inhalation dose
4.1Thermal impact of cooling4.2Water abstraction and effects on fish4.3Cooling towers and vapour4.4Noise and vibration4.5Traffic and construction4.6Conventional and hazardous waste4.7Socio-economic impacts4.8Landscape impact4.9Cumulative effects4.10Case study: thermal impact of a discharge into the river
5.1Uranium mining and restoration5.2Impact of the fuel cycle5.3Radioactive waste management5.4Temporary and geological repositories5.5Decommissioning and site restoration5.6Life cycle analysis of nuclear power5.7Comparative carbon footprint5.8Corrective and compensatory measures5.9Monitoring and environmental impact declaration5.10Workshop: Leopold matrix for a power plant
6.1Description of the nuclear project6.2Analysis of alternatives6.3Environmental inventory6.4Identification and assessment of impacts6.5Calculation of radiological doses6.6Corrective measures6.7Environmental monitoring programme6.8Study synthesis6.9Report and presentation6.10Final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetable: students progress at their own pace within the intake, which makes it possible to combine the course with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is QGIS, ArcGIS Pro, ERICA Tool, RESRAD-OFFSITE, in free, academic or evaluation versions. Assignments are based on real procedures for characterising a site's environment, assessing doses to biota, and preparing an environmental impact study. Assessment is continuous, module by module, plus the final integrative project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Describe the regulatory framework for the environmental assessment of nuclear facilities.
Characterise the physical, biotic and socio-economic environment of a site.
Assess radiological impacts on the public and biota.
Identify and assess non-radiological impacts.
Integrate the life cycle, waste and decommissioning into the assessment.
Where this takes you
Requirements
- No prior qualification is required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient Spanish to follow technical regulatory texts.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 300 hours, spread over 3 to 5 months. That is an average of 10 to 15 hours per week, compatible with a full-time job.
You will work with QGIS, ArcGIS Pro, ERICA Tool and RESRAD-OFFSITE. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
A SEIUM diploma on passing the continuous assessment and the final integrative project. It is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or postgraduate diploma in the same area can be recognised in the higher programme. Check the recognition policy when you enrol.
Related programmes
Containment and Passive Safety in Reactors Course
Online 300-hour course in containment and passive safety in reactors. 6 modules covering IAEA SSR-2/1 (safety in the design of nuclear power plants), INSAG-10 (defence in…
Probabilistic Safety Assessment (PSA) Level 1 Course
Online 300-hour course in Probabilistic Safety Assessment (PSA) Level 1. 6 modules covering IAEA SSG-3 (Rev.1) (Level 1 PSA), ASME/ANS RA-Sa-2009 (PSA standard) and RiskSpectrum PSA.…
Course in Academic Project Management for Decommissioning Projects
Online 300-hour course in academic project management for decommissioning projects. 6 modules covering IAEA GSR Part 6 (decommissioning of facilities), IAEA SSG-47 (decommissioning of nuclear power…
More in Nuclear Engineering & Nuclear Fuel Cycle Technologies
All Nuclear Engineering & Nuclear Fuel Cycle Technologies programmes → · How to apply · Fees & financing · Scholarships