Postgraduate DiplomaDefense, Military Engineering & Land Systems Applications open

Postgraduate Diploma in Ethical Design and Dual Use of Military Technology

Online postgraduate diploma of 800 hours in ethical design and dual use of military technology, with 8 modules covering technology and society, the dual-use regulatory framework, design ethics, international law and weapons review, sensitive research, corporate compliance and emerging technologies, with an assigned technical tutor.

Duration800 hours · 6–8 months
ModeOnline
LanguageEnglish
Start datesSet by the faculty
AwardSEIUM Institute diploma

Postgraduate Diploma in Ethical Design and Dual Use of Military Technology — studying from New Zealand

New Zealand's defence engineering sector is centred on the New Zealand Defence Force, which operates land, sea and air capabilities, with major bases at Linton and Burnham. Defence procurement and sustainment are managed through the Ministry of Defence, and local firms support maintenance, communications and vehicle systems. Land systems engineering is closely linked to the country's agricultural and forestry sectors, where ruggedised vehicles and equipment are developed and maintained.

Fees for New Zealand: NZ$1,770 (New Zealand dollar), with instalments and employer sponsorship available.

Relevant bodies in New Zealand

  • New Zealand Defence Force (NZDF)
  • Ministry of Defence
  • Defence Industry New Zealand

Typical roles

  • Military Systems Engineer
  • Land Systems Engineer
  • Defence Procurement Specialist
  • Sustainment Engineer

Questions from New Zealand

How is defence and military engineering recognised in New Zealand?

Engineering registration is handled by Engineering New Zealand, and defence procurement and security clearances are managed through the New Zealand Defence Force and government procurement processes. Security clearance requirements can matter more than academic credentials for some roles. SEIUM is a private institute, and its qualifications are not accredited by a national body, so recognition rests with the employer.

What defence and land systems employers operate in New Zealand?

Opportunities arise with the New Zealand Defence Force, Defence Technology Agency, defence industry suppliers and engineering firms serving land systems and vehicles. Many roles require citizenship or security clearance. A private online qualification may support an application, but it does not guarantee a position, and clearance and experience usually weigh more heavily.

Is it possible to study from New Zealand without a visa, and can my employer pay?

Yes, programmes are 100% online and taught in English, so no student visa is needed to study from home. Each includes an assigned technical tutor and a final project. Fees are payable in instalments, and employer sponsorship is possible. Specialist courses take 300 hours, diplomas 800 and master's 1,900, so plan your workload carefully.

Virtual lab · try it before you enrol

Take the controls.

Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.

SIM · LIVE ●
Learning outcomes

What you will be able to do

01

Understand the relationship between technology, defence and society.

02

Apply the dual-use regulatory framework.

03

Integrate ethical principles into technology design.

04

Analyse the legal review of weapons under international law.

05

Manage sensitive research and its security.

06

Design corporate compliance programmes in line with ISO 37301.

07

Assess the dual-use risks of emerging technologies.

Profile

Who it's for

  • Research ethics officers at universities and research centres.
  • Compliance managers in the defence and technology sectors.
  • Dual-use analysts.
  • Defence R&D engineers.
  • Responsible innovation consultants.
  • European project managers.
  • Engineering or science graduates seeking to enter the defence industry.
Standards & tools

What you'll work with

  • Regulation (EU) 2021/821 (control of dual-use items)
  • Recommendation (EU) 2021/1700 (compliance in dual-use research)
  • Regulation (EU) 2021/695, Article 7 (Horizon Europe ethics)
  • Additional Protocol I to the Geneva Conventions, Article 36 (legal review of new weapons)
  • Arms Trade Treaty (2013) (international arms transfers)
  • ISO 37301 (compliance management systems)
  • OECD Guidelines for Multinational Enterprises (responsible business conduct)
  • SAP GTS (Global Trade Services)
  • NVivo
  • Zotero
  • advanced Excel
Syllabus

8 modules

  1. 1.1History of military and civil technology
  2. 1.2The concept of dual use
  3. 1.3Spin-off and spin-in
  4. 1.4Defence innovation in Europe
  5. 1.5Funded research and its purposes
  6. 1.6Public perception of the defence industry
  7. 1.7Ethics of technology
  8. 1.8Corporate social responsibility
  9. 1.9Stakeholders
  10. 1.10Workshop: analysis of a technology transfer case
  1. 2.1Dual-use Regulation (EU) 2021/821
  2. 2.2Control lists and categories
  3. 2.3Catch-all controls
  4. 2.4Wassenaar Arrangement
  5. 2.5Missile Technology Control Regime
  6. 2.6Nuclear Suppliers Group and Australia Group
  7. 2.7Law 53/2007 and Royal Decree 679/2014
  8. 2.8Technical assistance and intangible transfers
  9. 2.9Sanctions and compliance
  10. 2.10Practical exercise: classifying a product against the control lists
  1. 3.1Ethical theories applied to engineering
  2. 3.2Value Sensitive Design
  3. 3.3Ethics by design
  4. 3.4Anticipatory responsibility
  5. 3.5Responsible research and innovation (RRI)
  6. 3.6Technology assessment
  7. 3.7Moral dilemmas of the engineer
  8. 3.8Codes of conduct
  9. 3.9Conscientious objection
  10. 3.10Case study: ethical assessment of a dual-use sensor
  1. 4.1Principles of international humanitarian law
  2. 4.2Article 36 of Additional Protocol I
  3. 4.3Prohibited weapons and limitations
  4. 4.4Chemical and biological weapons conventions
  5. 4.5Arms Trade Treaty
  6. 4.6Autonomous systems and the CCW debate
  7. 4.7Human rights and surveillance technologies
  8. 4.8State and corporate responsibility
  9. 4.9Case law
  10. 4.10Workshop: simulated legal review of a technology
  1. 5.1Dual-use research of concern (DURC)
  2. 5.2Security in university research
  3. 5.3Internal export compliance
  4. 5.4Handling classified information
  5. 5.5Responsible publication
  6. 5.6International collaborations
  7. 5.7Horizon Europe and ethics
  8. 5.8Knowledge protection
  9. 5.9Ethics committees
  10. 5.10Practical exercise: internal compliance plan
  1. 6.1Internal compliance programmes (ICP)
  2. 6.2Human rights due diligence
  3. 6.3Due Diligence Directive 2024/1760
  4. 6.4Assessment of customers and end users
  5. 6.5Responsible supply chain
  6. 6.6Transparency and reporting
  7. 6.7ESG criteria and defence
  8. 6.8Whistleblowing management
  9. 6.9Ethics audit
  10. 6.10Case study: due diligence for an export
  1. 7.1Artificial intelligence and dual use
  2. 7.2Civil and military drones
  3. 7.3Offensive and defensive cybersecurity
  4. 7.4Biotechnology and risks
  5. 7.5Space technologies
  6. 7.6Quantum and cryptography
  7. 7.7Advanced materials
  8. 7.8Technology foresight
  9. 7.9Anticipatory governance
  10. 7.10Practical exercise: risk analysis of an emerging technology
  1. 8.1Selecting the technology
  2. 8.2Technical description and applications
  3. 8.3Regulatory classification
  4. 8.4Ethical analysis
  5. 8.5Legal analysis
  6. 8.6Risks and safeguards
  7. 8.7Governance recommendations
  8. 8.8Compliance plan
  9. 8.9Report and presentation
  10. 8.10Final project: final review with the tutor
Methodology, software & labs

How you'll learn

100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within the intake, so it fits around your job.

Each module combines theory, guided reading of the original standard and applied exercises. The working software is SAP GTS (Global Trade Services), NVivo, Zotero and advanced Excel, in free, academic or evaluation versions. Practical work is based on real procedures: ethical assessments of R&D projects, dual-use reviews of emerging technologies and corporate compliance case studies. Assessment is continuous by module, plus the final integrative project.

Standards covered: Regulation (EU) 2021/821, Recommendation (EU) 2021/1700, Regulation (EU) 2021/695, Article 7, Additional Protocol I to the Geneva Conventions, Article 36, Arms Trade Treaty (2013), ISO 37301, OECD Guidelines for Multinational Enterprises.

Assigned technical tutor:every module ends with a deliverable that your tutor marks individually.
Standards-based learning:guided reading of Regulation (EU) 2021/821, Recommendation (EU) 2021/1700 and Article 7 of the Horizon Europe Regulation applied to real cases, not as a theoretical annex.
Industry software:SAP GTS (Global Trade Services), NVivo, Zotero and advanced Excel, in free, academic or evaluation versions.
Final project:a dual-use assessment of a real technology, covering its regulatory classification, ethical and legal analysis, safeguards and compliance plan, reviewed by your tutor.
Flexible format:100% online, no fixed timetables, compatible with full-time work.
Capstone project

Build it end to end

Your final project follows the real engineering workflow, step by step, reviewed by your tutor.

Select the technology
Choose the technology and describe its technical characteristics and applications.
Classify it
Determine its regulatory classification under the dual-use control lists.
Ethical and legal analysis
Carry out the ethical and legal analysis of its possible uses.
Risks and governance
Identify risks and safeguards and draw up governance recommendations and a compliance plan.
Final project
Present the complete dual-use assessment in a report reviewed by your tutor.
Career opportunities

Where this takes you

Research Ethics OfficerCompliance ManagerDual-Use AnalystDefence R&D EngineerResponsible Innovation ConsultantEuropean Projects Manager
Admissions & scholarships

Requirements

  • Prior technical training or professional experience in the sector. No university degree is required.
  • A computer capable of running the programme software and an internet connection.
  • English sufficient to read technical standards.

Ready to start?

Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.

FAQ

Frequently asked questions

The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.

You work with SAP GTS (Global Trade Services), NVivo, Zotero and advanced Excel, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.

A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.

Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.

Prior technical training or professional experience in the sector (no university degree required), a suitable computer and English sufficient to read technical standards.

Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.

Postgraduate Diploma in Ethical Design and Dual Use of Military TechnologyEnrol
Scroll to Top
SEIUM – Institute of Advanced Engineering
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.