Diploma in ECM/ECCM under NATO Standards
Online postgraduate diploma of 800 hours in ECM/ECCM under NATO standards: 8 modules covering the electromagnetic spectrum in defence, electronic protection by design, NATO and Allied doctrine (AJP-3.6), electromagnetic compatibility and E3 (MIL-STD-461G, MIL-STD-464D), electromagnetic environment modelling, testing and evaluation, and legal and ethical aspects, with an assigned technical tutor.
Diploma in ECM/ECCM under NATO Standards — studying from New Zealand
New Zealand's defence engineering sector is centred on the New Zealand Defence Force, which operates land, sea and air capabilities, with major bases at Linton and Burnham. Defence procurement and sustainment are managed through the Ministry of Defence, and local firms support maintenance, communications and vehicle systems. Land systems engineering is closely linked to the country's agricultural and forestry sectors, where ruggedised vehicles and equipment are developed and maintained.
Fees for New Zealand: NZ$2,550 (New Zealand dollar), with instalments and employer sponsorship available.
Relevant bodies in New Zealand
Typical roles
Questions from New Zealand
How is defence and military engineering recognised in New Zealand?
Engineering registration is handled by Engineering New Zealand, and defence procurement and security clearances are managed through the New Zealand Defence Force and government procurement processes. Security clearance requirements can matter more than academic credentials for some roles. SEIUM is a private institute, and its qualifications are not accredited by a national body, so recognition rests with the employer.
What defence and land systems employers operate in New Zealand?
Opportunities arise with the New Zealand Defence Force, Defence Technology Agency, defence industry suppliers and engineering firms serving land systems and vehicles. Many roles require citizenship or security clearance. A private online qualification may support an application, but it does not guarantee a position, and clearance and experience usually weigh more heavily.
Is it possible to study from New Zealand without a visa, and can my employer pay?
Yes, programmes are 100% online and taught in English, so no student visa is needed to study from home. Each includes an assigned technical tutor and a final project. Fees are payable in instalments, and employer sponsorship is possible. Specialist courses take 300 hours, diplomas 800 and master's 1,900, so plan your workload carefully.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand the electromagnetic environment in defence.
Apply electronic protection principles in design.
Interpret the applicable NATO and Allied standards.
Ensure electromagnetic compatibility on platforms.
Model the electromagnetic environment.
Plan tests and evaluations.
Analyse the legal and ethical aspects of spectrum use.
Who it's for
- Electromagnetic systems engineers.
- Electromagnetic compatibility engineers.
- Spectrum managers.
- RF test engineers.
- Defence standards analysts.
- Antenna engineers.
- Engineering or science graduates looking to enter the defence sector.
What you'll work with
- AJP-3.6 (Allied joint doctrine for electronic warfare)
- MIL-STD-461G (control of electromagnetic interference characteristics)
- MIL-STD-464D (electromagnetic environmental effects requirements for systems)
- ITU Radio Regulations (international treaty on the use of the radio spectrum)
- MIL-STD-810H (environmental engineering and laboratory tests)
- Regulation (EU) 2021/821 (EU dual-use export control regime)
- MATLAB Phased Array System Toolbox
- Ansys STK
- CST Studio Suite
- Keysight SystemVue
8 modules
1.1Frequency bands and propagation1.2Radar and communications equations1.3Electronic support measures: concepts1.4Countermeasures and counter-countermeasures: definitions1.5Allied doctrine AJP-3.61.6Spectrum management1.7Electromagnetic fratricide1.8ITU legal framework1.9Historical evolution1.10Case study: map of the electromagnetic environment of a platform
2.1Receiver robustness2.2Frequency diversity2.3Frequency hopping2.4Spread spectrum2.5Adaptive antennas2.6Robust signal processing2.7Low probability of intercept2.8Protection requirements in specifications2.9Robustness assessment2.10Workshop: calculating processing gain
3.1Structure of Allied EW doctrine3.2Spectrum management in NATO3.3Interoperability of EW systems3.4Frequency coordination in operations3.5Data exchange standards3.6National requirements3.7Relationship with MIL-STD standards3.8STANAG implementation3.9Standardised training3.10Practical exercise: regulatory matrix for a system
4.1MIL-STD-461G requirements4.2MIL-STD-464D requirements4.3Intra-system compatibility4.4Coexistence of emitters on platforms4.5Interference analysis4.6EMI control plans4.7Compatibility tests4.8Safety margins4.9Non-conformity management4.10Lab: coexistence analysis of two units of equipment
5.1Propagation models5.2Scenario simulation5.3Simulation tools5.4Coverage analysis5.5Mutual interference5.6Antenna modelling5.7Model validation5.8Environment databases5.9Visualisation of results5.10Practical exercise: coverage simulation with STK
6.1Anechoic chambers6.2Environment simulators6.3Integrated test facilities6.4Authorised field tests6.5Effectiveness metrics6.6Test planning6.7Data management6.8Certification6.9Evaluation reports6.10Case study: robustness evaluation plan for a receiver
7.1International humanitarian law and the spectrum7.2Protection of civilian infrastructure7.3Harmful interference according to the ITU7.4Protection of civil aviation7.5State responsibility7.6Export controls7.7Regulation (EU) 2021/8217.8Engineering ethics in electronic warfare7.9Transparency and oversight7.10Workshop: legal analysis of an interference case
8.1System description8.2Electromagnetic environment8.3Protection requirements8.4Design measures8.5Compatibility analysis8.6Test plan8.7Regulatory matrix8.8Conclusions8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within the intake, so you can combine it with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is MATLAB Phased Array System Toolbox, Ansys STK, CST Studio Suite and Keysight SystemVue, in free, academic or evaluation versions. Practical work is based on real procedures from electromagnetic coexistence analyses, coverage simulations and receiver robustness evaluation plans. Assessment is continuous by module, plus the final capstone project.
Standards covered: AJP-3.6, MIL-STD-461G, MIL-STD-464D, ITU Radio Regulations, MIL-STD-810H, Regulation (EU) 2021/821.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. A university degree is not required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with MATLAB Phased Array System Toolbox, Ansys STK, CST Studio Suite and Keysight SystemVue, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Submarine Escape and Safety Systems
Online postgraduate diploma of 800 hours in submarine escape and safety systems: 8 modules covering submarine risks, individual escape, rescue, life support, fire and flooding, signalling…
Diploma in Military Firmware Security Strategies
Online postgraduate diploma of 800 hours in military firmware security strategies, structured in 8 modules covering embedded firmware, threat modelling, secure boot and root of trust,…
Diploma in Quality Control of Welded Joints
Online postgraduate diploma of 800 hours in quality control of welded joints. 8 modules covering welding processes, procedure and welder qualification, welding defects, surface and volumetric…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships