Diploma in Submarine Escape and Safety Systems
Online postgraduate diploma of 800 hours in submarine escape and safety systems: 8 modules covering submarine risks, individual escape, rescue, life support, fire and flooding, signalling and certification, under ATP-57 (NATO), Lloyd’s Register rules and MIL-STD-882E, with an assigned technical tutor.
Diploma in Submarine Escape and Safety Systems — studying from New Zealand
New Zealand's defence engineering sector is centred on the New Zealand Defence Force, which operates land, sea and air capabilities, with major bases at Linton and Burnham. Defence procurement and sustainment are managed through the Ministry of Defence, and local firms support maintenance, communications and vehicle systems. Land systems engineering is closely linked to the country's agricultural and forestry sectors, where ruggedised vehicles and equipment are developed and maintained.
Fees for New Zealand: NZ$1,770 (New Zealand dollar), with instalments and employer sponsorship available.
Relevant bodies in New Zealand
Typical roles
Questions from New Zealand
How is defence and military engineering recognised in New Zealand?
Engineering registration is handled by Engineering New Zealand, and defence procurement and security clearances are managed through the New Zealand Defence Force and government procurement processes. Security clearance requirements can matter more than academic credentials for some roles. SEIUM is a private institute, and its qualifications are not accredited by a national body, so recognition rests with the employer.
What defence and land systems employers operate in New Zealand?
Opportunities arise with the New Zealand Defence Force, Defence Technology Agency, defence industry suppliers and engineering firms serving land systems and vehicles. Many roles require citizenship or security clearance. A private online qualification may support an application, but it does not guarantee a position, and clearance and experience usually weigh more heavily.
Is it possible to study from New Zealand without a visa, and can my employer pay?
Yes, programmes are 100% online and taught in English, so no student visa is needed to study from home. Each includes an assigned technical tutor and a final project. Fees are payable in instalments, and employer sponsorship is possible. Specialist courses take 300 hours, diplomas 800 and master's 1,900, so plan your workload carefully.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Analyse the characteristic risks of submarine operations.
Understand the principles and limits of individual escape.
Describe submarine rescue systems and procedures.
Size emergency life-support systems.
Apply fire and flooding prevention and control measures.
Plan the signalling and location of a distressed submarine.
Draw up a comprehensive safety and escape plan.
Who it's for
- Submarine safety engineers looking to deepen their expertise in escape and survival systems.
- Submarine rescue specialists.
- Life-support engineers working on naval platforms.
- Naval risk analysts.
- Survival instructors.
- Safety equipment inspectors.
- Engineering or science graduates aiming to move into the defence sector.
What you'll work with
- ATP-57 (NATO) (NATO submarine escape and rescue manual)
- Lloyd’s Register Rules for the Classification of Naval Submarines (classification rules for naval submarines)
- MIL-STD-882E (system safety)
- MIL-STD-1472H (human engineering)
- NFPA 750 (water mist fire protection systems)
- ISO 15027-1 (immersion suits)
- MATLAB
- PyroSim (FDS)
- ANSYS Fluent
- Simulink
8 modules
1.1History of submarine accidents1.2Lessons from the Thresher, the Kursk and the San Juan1.3Flooding, fire and atmosphere1.4Safety management systems1.5The SUBSAFE programme1.6Safety culture on board1.7Risk analysis1.8Emergency organisation1.9Crew training1.10Case study: analysis of a historical accident
2.1Physiology of escape2.2Escape via the escape trunk2.3Escape suits2.4Escape from depth2.5Compartment escape2.6Barotrauma and decompression sickness2.7Training tanks2.8Depth limits for escape2.9Survival on the surface2.10Practical exercise: escape plan for a compartment
3.1The concept of a distressed submarine3.2NATO Submarine Rescue System3.3Rescue vehicles3.4Intervention ROVs3.5Mating to the hatch3.6Transfer under pressure3.7Decompression of survivors3.8ISMERLO international liaison office3.9International rescue exercises3.10Workshop: sequence of a rescue operation
4.1CO2 control4.2Oxygen generation4.3Atmospheric contaminants4.4Oxygen candles4.5Emergency absorbents4.6Atmospheric monitoring4.7Compartment pressurisation4.8Prolonged survival4.9Toxicology in enclosed spaces4.10Laboratory: CO2 and O2 balance
5.1Fire prevention5.2Early detection5.3Extinguishing with water mist and gases5.4Watertight compartmentation5.5Damage control5.6Bilge pumps5.7Emergency ballast blowing5.8Crew training5.9Damage-control simulators5.10Case study: managing a hull breach
6.1Emergency radio beacons6.2Indicator buoys6.3Underwater telephone6.4Emergency acoustic signals6.5Acoustic beacons6.6Location systems6.7Communication with the surface6.8SUBMISS and SUBSUNK procedures6.9Coordination with maritime search and rescue6.10Practical exercise: emergency communications plan
7.1Design requirements for escape7.2Applicable classification rules7.3NATO ATP-57 manual7.4Standards for survival equipment7.5Certification of escape trunks7.6Periodic inspections7.7Human factors in emergencies7.8Hyperbaric medicine7.9Maintenance of escape equipment7.10Workshop: escape safety audit
8.1Platform description8.2Analysis of emergency scenarios8.3Escape plan8.4Rescue plan8.5Survival life support8.6Signalling and communications8.7Design recommendations8.8Conclusions8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetables: you progress at your own pace within each intake, so you can combine it with your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is MATLAB, PyroSim (FDS), ANSYS Fluent and Simulink, in free, academic or evaluation versions. Practical work is based on real procedures for analysing emergency scenarios, atmospheric survival balances and fire simulation in compartments. Assessment is continuous by module, plus the final project.
Standards covered: ATP-57 (NATO), Lloyd’s Register Rules for the Classification of Naval Submarines, MIL-STD-882E, MIL-STD-1472H, NFPA 750, ISO 15027-1.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with MATLAB, PyroSim (FDS), ANSYS Fluent and Simulink, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Nuclear Fuel Failure and Degradation
Online postgraduate diploma of 800 hours in nuclear fuel failure and degradation. 8 modules covering in-reactor fuel behaviour, failure mechanisms in operation, accident behaviour, failure detection,…
Diploma in PLM and Military Configuration Control
Online postgraduate diploma of 800 hours in PLM and military configuration control: 8 modules covering the defence product life cycle, MIL-HDBK-61B, SAE EIA-649C and ACMP-2000, configuration…
Diploma in Validation of Multispectral Signatures
Online postgraduate diploma of 800 hours in the validation of multispectral signatures, structured in 8 modules covering detectability, visible, infrared and radar signatures, signature modelling and…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships