Postgraduate Diploma in Abrasion/Impact and EN 17092 Certification
Online 800-hour Postgraduate Diploma in Abrasion/Impact and EN 17092 Certification. 8 modules with EN 17092-1:2020, EN 17092-4:2020 and Minitab. Assigned tutor and open enrolment.
Postgraduate Diploma in Abrasion/Impact and EN 17092 Certification — studying from Malta
Malta has a strong culture of two-wheeled transport, with scooters and motorcycles widely used given the island's dense traffic and limited parking. This has created a steady market for dealerships, workshops and parts suppliers serving riders. Engineers interested in 2-wheelers can find roles in servicing, technical support and the importation of vehicles and components. Opportunities also arise in electric scooter and light mobility, which are gaining attention in urban policy discussions.
Fees for Malta: €1,490 (Euro), with instalments and employer sponsorship available.
Relevant bodies in Malta
Typical roles
Questions from Malta
Does a SEIUM qualification count for regulated vehicle engineering in Malta?
Vehicle type approval and homologation in Malta follow EU frameworks administered through the Transport Malta authority. SEIUM Institute's qualifications are private and not official state degrees or accredited by any national body. Whether they are recognised for particular roles is decided by employers or the relevant body, so it is worth confirming before enrolling.
What career opportunities for 2-wheeler engineers exist in Malta?
Malta has a small market for motorcycles and two-wheelers, mainly through dealerships, importers, servicing and parts supply. Opportunities are limited compared with larger countries, so many professionals work in adjacent areas such as electronics or design. Employers decide how much value they place on a private online qualification, so direct conversations with them are advisable.
Is the programme workload manageable alongside work, and is employer funding possible?
The programmes are fully online and taught in English. Hours range from 300 for specialist courses to 1,900 for master's programmes, so choose according to the time you can commit. Fees are payable in instalments, employer sponsorship is possible, and each student has an assigned technical tutor for guidance.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Analyse the mechanics of falls and abrasion and impact injuries.
Interpret the structure and classes of the EN 17092 standard.
Carry out and interpret Darmstadt-type abrasion tests.
Evaluate impact protectors to EN 1621-1 and EN 1621-2.
Select materials and constructions by risk zone.
Manage the certification route with a notified body.
Prepare technical files and labelling in line with regulations.
Who it's for
- PPE laboratory technician wishing to specialise in Abrasion/Impact and EN 17092 Certification.
- Textile product engineer wishing to specialise in Abrasion/Impact and EN 17092 Certification.
- Certification manager wishing to specialise in Abrasion/Impact and EN 17092 Certification.
- Notified body auditor wishing to specialise in Abrasion/Impact and EN 17092 Certification.
- Protective garment designer wishing to specialise in Abrasion/Impact and EN 17092 Certification.
- Supplier quality manager wishing to specialise in Abrasion/Impact and EN 17092 Certification.
- Graduates in engineering or sciences seeking to enter motorcyclist equipment.
What you'll work with
- EN 17092-1:2020
- EN 17092-4:2020
- Regulation (EU) 2016/425
- EN 1621-1:2012
- EN 1621-2:2014
- EN 13595-2:2002
- ISO/IEC 17025:2017
8 modules · 800 h
1.1Kinematics of sliding on asphalt1.2Typical abrasion speeds and distances1.3Impact energies in body zones1.4European accident data1.5Abrasion and burn injuries1.6Impact fractures in limbs1.7Role of the garment in reducing injuries1.8Differences between street and track1.9Derived design criteria1.10Case study: reconstruction of injuries in an urban fall
2.1Structure of parts 1 to 62.2Classes AAA, AA, A, B and C2.3Risk zones by class2.4Abrasion requirements by zone2.5Seam and tear resistance2.6Dimensional and fit requirements2.7Ergonomic requirements in riding posture2.8User information2.9Transition from EN 135952.10Practice: classification of garments to EN 17092
3.1Darmstadt abrasion machine3.2Specimen preparation3.3Speed, abrasive paper and load3.4Perforation criteria3.5Comparison with the Cambridge method3.6Variability between laboratories3.7Influence of layers and linings3.8Effect of washing and use3.9Interpretation of abrasion results3.10Laboratory: Darmstadt test of three fabrics
4.1EN 1621-1 standard for limbs4.2EN 1621-2 standard for back4.3Protection levels 1 and 24.4Transmitted force test4.5Materials: viscoelastics, nitriles and cells4.6Test temperatures4.7Size and coverage zones4.8Ergonomics and flexibility4.9Protector durability4.10Practice: transmitted force test on protectors
5.1Seam tensile strength5.2Fabric tear resistance5.3Zip and fastener strength test5.4Restraint and positioning of protectors5.5Impact cut test5.6Accelerated ageing and repeated washing5.7Interlaboratory repeatability and reproducibility5.8Estimation of measurement uncertainty5.9Structure of the test report5.10Case study: critical reading of a laboratory report
6.1Bovine and kangaroo leather and its tanning6.2High-tenacity polyamide fabrics6.3Aramids and UHMWPE in reinforcements6.4Technical denim with reinforcing fibres6.5Abrasion-resistant meshes and linings6.6Hidden, double and triple seams6.7Membranes and their effect on abrasion6.8Multi-layer construction6.9Material selection by risk zone6.10Workshop: reinforcement map of an urban trouser
7.1EU type examination under module B7.2Conformity to type: modules C2 and D7.3Choosing the notified body7.4Manufacturer's technical documentation7.5Sample selection and number7.6CE marking, pictogram and class7.7Market surveillance and recalls7.8Management of non-conformities7.9Requirements in the United Kingdom and other markets7.10Case study: certification timeline for a jacket
8.1Defining the intended use of the garment8.2Target class and risk zones8.3Selection of materials and protectors8.4Abrasion and impact test plan8.5Analysis of results obtained8.6Design adjustments after testing8.7Complete technical file8.8Labelling, pictograms and user leaflet8.9Report and presentation8.10Final review with the tutor
How you'll learn
100 % online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetable: students progress at their own pace within the intake, which makes it possible to combine it with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Minitab, CLO3D, Excel, Lectra Modaris, in free, academic or evaluation versions. Tests are studied using real procedures: Darmstadt abrasion tests on fabrics, transmitted force tests on protectors, and preparation of certification dossiers. Assessment is continuous across each module plus the final integrating project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Analyse the mechanics of falls and abrasion and impact injuries.
Interpret the structure and classes of the EN 17092 standard.
Carry out and interpret Darmstadt-type abrasion tests.
Evaluate impact protectors to EN 1621-1 and EN 1621-2.
Select materials and constructions by risk zone.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. A university degree is not required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient Spanish to follow technical standards documentation.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme comprises 800 total hours spread over 6 to 8 months. That is an average of 10 to 15 hours per week, compatible with a full-time job.
The programme uses Minitab, CLO3D, Excel and Lectra Modaris. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
A SEIUM Institute diploma awarded on passing continuous assessment and the integrating project. This is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a Course or Postgraduate Diploma in the same area are recognised towards the higher programme. Check the recognition policy when you enrol.
Related programmes
Postgraduate Diploma in CMF for 2R and Perceived Quality
Online 800-hour Postgraduate Diploma in CMF for 2R and Perceived Quality. 8 modules covering ISO 11664-4:2008, ISO/CIE 11664-6:2022 and X-Rite Color iQC. Assigned tutor and open…
Postgraduate Diploma in Advanced Valving and Shock Absorber Test Bench
Online Postgraduate Diploma of 800 hours in Advanced Valving and Shock Absorber Test Bench. 8 modules covering ISO 8855:2011, Regulation (EU) No 168/2013 and Shim ReStackor.…
Postgraduate Diploma in Operations and Urban Data for 2R Sharing
Online 800-hour Postgraduate Diploma in Operations and Urban Data for 2R Sharing. 8 modules covering GBFS v3.0 (General Bikeshare Feed Specification), MDS 2.0 (Mobility Data Specification)…
More in Motorcycles & 2-Wheelers
All Motorcycles & 2-Wheelers programmes → · How to apply · Fees & financing · Scholarships