Course in Galley Design and Onboard Service Areas
Online course of 300 hours in onboard galley and service area design: 6 modules covering catering operations, galley layout, equipment, food safety, fire safety and waste, and a full galley project, with an assigned technical tutor.
Course in Galley Design and Onboard Service Areas — studying from India
India has a long coastline and growing maritime ambitions, supported by shipbuilding and port development at Kochi, Mumbai, Visakhapatnam and Kolkata. Cochin Shipyard, Mazagon Dock Shipbuilders, Garden Reach Shipbuilders and Larsen & Toubro's offshore arm are important employers. The Directorate General of Shipping sets regulations for vessel safety and seafarers, while the Indian Register of Shipping provides classification services. Offshore oil and gas activity led by Oil and Natural Gas Corporation adds further demand. Engineers work on naval architecture, marine systems, offshore structures and recreational boat design.
Fees for India: ₹47,500 (Indian Rupee), with instalments and employer sponsorship available.
Relevant bodies in India
Typical roles
Questions from India
Which bodies regulate naval and offshore engineering in India?
The Directorate General of Shipping regulates shipping, and the Indian Register of Shipping is the classification society. Naval work is tied to the Indian Navy and shipyards. SEIUM's qualification is a private one and is not accredited by any national body, so recognition by these organisations is not automatic and must be checked with them.
Which employers in India use naval, offshore and nautical engineering skills?
Shipyards such as Mazagon Dock and Cochin Shipyard, offshore oil and gas service firms, marine consultancies, and sports boat builders are typical employers. Each decides its own hiring criteria. The programme can support your profile, but it does not secure a role or any particular recognition.
Can I study this online from India with a job, and what are the costs?
The programme is 100% online and taught in English, so you can study from anywhere in India and do not need a student visa. Workload depends on the programme length, with support from an assigned technical tutor and a final project. Fees are payable in instalments, and employer sponsorship is possible.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand onboard catering operations and their flows.
Design the layout of galleys and service areas.
Select equipment suited to the marine environment.
Implement HACCP and hygiene systems in line with the VSP.
Apply fire safety measures in galleys.
Manage waste and food waste sustainably.
Develop the project for a galley and its service area on board.
Who it's for
- Marine industrial galley designers.
- Executive chefs working on board.
- Food hygiene managers.
- Cruise ship food and beverage directors.
- Catering equipment technicians.
- Onboard hotel operations consultants.
- Engineering or science graduates looking to join cruise lines.
What you'll work with
- Regulation (EC) 852/2004 (EU food hygiene regulation)
- MLC 2006 Regulation 3.2 (food and catering for seafarers)
- CDC Vessel Sanitation Program Operations Manual (US public health requirements for cruise ships)
- SOLAS Chapter II-2 (fire protection on ships)
- ISO 15371 (fire-extinguishing systems for galley cooking equipment)
- MARPOL Annex V (prevention of pollution by garbage from ships)
- Codex Alimentarius CXC 1-1969 (general principles of food hygiene)
- EN 1672-2 (food processing machinery hygiene requirements)
- AutoCAD
- Autodesk Revit
- SketchUp
- Safefood 360
6 modules · 300 h
1.1Meal volumes on a cruise ship1.2Main galley and satellite galleys1.3Product, staff and waste flows1.4Shift management and continuous service1.5Speciality restaurants1.6Room service1.7Galleys on yachts and small vessels1.8Provisioning logistics1.9Space and weight constraints1.10Case study: flows in a cruise ship galley
2.1Forward-flow principle2.2Receiving and storage areas2.3Cold rooms and freezers2.4Cold and hot preparation2.5Pastry and bakery2.6Dishwashing area2.7Pantries and plating2.8Vertical connection with restaurants2.9Workstation ergonomics2.10Workshop: layout of a satellite galley
3.1Electric cooking equipment3.2Combi ovens and blast chillers3.3Securing equipment against ship motion3.4Hoods and fume extraction3.5Power supply and loads3.6Potable water and drainage3.7Grease separators3.8Refrigeration and fluorinated gases3.9Equipment maintenance3.10Practical exercise: equipment list and loads
4.1HACCP system on board4.2Hygiene of surfaces and materials4.3Temperature control4.4Allergens and special diets4.5Pests and pest control4.6Vessel Sanitation Program inspections4.7Potable water on board4.8Staff training4.9Management of foodborne outbreaks4.10Lab: HACCP plan for a galley
5.1Fire protection in galleys5.2Fire suppression in fryers and ducts5.3Occupational risks for staff5.4Garbage management under MARPOL Annex V5.5Reducing food waste5.6Food waste macerators and biodigesters5.7Energy efficiency of equipment5.8Local and sustainable purchasing5.9Environmental indicators for the galley5.10Case study: reducing food waste
6.1Service programme6.2Capacity calculation6.3Zone layout6.4Equipment selection6.5Galley technical installations6.6Hygiene plan6.7Safety and waste plan6.8Investment and operating budget6.9Report and presentation6.10Final project: final review with the tutor
How you'll learn
The course is taught 100% online on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so you can combine it with your job.
Each module combines theory, guided reading of the original standards and applied exercises. The working software is AutoCAD, Autodesk Revit, SketchUp and Safefood 360, in free, academic or evaluation versions. Exercises are based on real procedures: laying out a cruise ship galley using the forward-flow principle, drawing up an onboard HACCP plan and preparing a galley waste management plan. Assessment is continuous by module, plus the final project.
Standards covered: Regulation (EC) 852/2004, MLC 2006 Regulation 3.2, CDC Vessel Sanitation Program Operations Manual, SOLAS Chapter II-2, ISO 15371, MARPOL Annex V, Codex Alimentarius CXC 1-1969, EN 1672-2.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- No prior qualification is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 300 hours over 3 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with AutoCAD, Autodesk Revit, SketchUp and Safefood 360, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute certificate, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
No prior qualification is required; you need a computer able to run the programme software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Hydrodynamic Simulation in Racing Yachts Course
Online 300 h course in hydrodynamic simulation for racing yachts. 6 modules covering World Sailing Equipment Rules of Sailing, ORC International Rule (Offshore Racing Congress) and…
Concurrent Engineering in Naval Construction Course
Online 300-hour course in concurrent engineering in naval construction. 6 modules with ISO/IEC/IEEE 15288:2023, ISO 10007:2017 and AVEVA Marine. Assigned tutor and open enrolment.
Course in Stability of Multihulls and Trimarans
Online 300-hour course in stability of multihulls and trimarans. 6 modules covering ISO 12217-2 Evaluation of stability and buoyancy of sailing boats of length greater than…
More in Naval, Offshore & Sports Nautical
All Naval, Offshore & Sports Nautical programmes → · How to apply · Fees & financing · Scholarships