Diploma in Implementation, ROI and User Security
Online postgraduate diploma of 800 hours in implementation, ROI and user safety: 8 modules covering assistive technology programmes, user risk analysis, functional safety and conformity, plant pilots and validation, return on investment, deployment and change management, long-term follow-up, and a final project, with an assigned technical tutor.
Diploma in Implementation, ROI and User Security — studying from Canada
Canada has a notable robotics and automation sector, with research leadership at institutions such as McGill University, the University of Toronto and the University of Waterloo. Industrial automation firms and integrators serve manufacturing, automotive and resource industries across Ontario, Québec and Alberta. The Canadian Space Agency's robotic systems contribute to space robotics expertise. Engineers work on control systems, industrial robots, mechatronics and automation integration.
Fees for Canada: C$2,790 (Canadian dollar), with instalments and employer sponsorship available.
Relevant bodies in Canada
Typical roles
Questions from Canada
Is this programme recognised by professional bodies in Canada for robotics and control engineering?
SEIUM's qualifications are private, not official state degrees, and are not accredited by any national body in Canada. Professional engineering titles are regulated provincially, for example by Professional Engineers Ontario, and engineering graduates in Canada typically pursue licensure through these bodies. Recognition of a private qualification is decided by employers or the relevant body.
Where could this qualification help in Canada's robotics and automation job market?
Canadian employers in manufacturing, logistics, aerospace, mining and automation integration may hire for robotics and control skills. Whether they value a private qualification is their decision, and many also weigh portfolios, experience and recognised credentials. The final project can demonstrate applied ability, though it does not guarantee any job.
How can I study this while working full time in Canada?
The programme is entirely online and taught in English, so you can study from home across Canadian time zones, and no student visa is needed. Choose from 300-hour specialist courses, 800-hour postgraduate diplomas or 1,900-hour master's programmes. Fees are payable in instalments, employer sponsorship is possible, and you receive an assigned technical tutor.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Plan implementation programmes for physical assistive technologies.
Analyse risks to users of wearable devices with ISO 12100.
Verify regulatory conformity and functional safety of equipment.
Design and run validation pilots on the shop floor.
Calculate economic return with NPV, IRR and sensitivity analysis.
Manage change and adoption by workers.
Establish long-term follow-up of health and actual use.
Who it's for
- Occupational health and safety managers.
- Industrial innovation project managers bringing assistive technologies into production.
- Industrial ergonomists.
- Technical investment analysts building business cases.
- Machinery safety engineers.
- Occupational health managers.
- Engineering or science graduates looking to enter the automotive sector.
What you'll work with
- Regulation (EU) 2023/1230 on machinery (EU machinery safety regulation)
- ISO 12100:2010 (safety of machinery: risk assessment)
- ISO 13482:2014 (personal care robots: safety)
- ISO 13849-1:2023 (safety-related parts of control systems)
- IEC 62133-2 (safety of lithium batteries)
- Spanish Law 31/1995 on Occupational Risk Prevention (Spanish occupational health and safety framework)
- ISO 45001:2018 (occupational health and safety management systems)
- Microsoft Excel with financial models
- Power BI
- Oracle Crystal Ball
- Xsens MVN Analyze
- LimeSurvey
8 modules
1.1Exoskeletons, manipulators and assistive cobots1.2Drivers: absenteeism, ageing and productivity1.3Lessons from failed implementations1.4Stakeholders: health and safety, production and HR1.5Worker participation and representation1.6Technology readiness level (TRL) of solutions1.7The TAM technology acceptance model1.8Defining the programme scope1.9Programme risks and critical assumptions1.10Workshop: implementation project charter
2.1ISO 12100 methodology applied to wearable devices2.2Mechanical risks: entrapment and pressure points2.3Joint misalignment and parasitic forces2.4Electrical and battery risks2.5Falls, balance and reduced mobility2.6Evacuation and emergency situations2.7Interaction with other machines at the workstation2.8Users with pre-existing medical conditions2.9Risk matrix and control measures2.10Case study: risk analysis of an active lumbar exoskeleton
3.1Regulation (EU) 2023/1230 and essential requirements3.2Functional safety according to ISO 13849-13.3Performance levels (PL) and categories3.4Electromagnetic compatibility of the device3.5Lithium battery safety according to IEC 621333.6Technical documentation and declaration of conformity3.7Responsibilities of the manufacturer and the user3.8Instructions for use and signage3.9Incident management and post-market surveillance3.10Practical exercise: conformity checklist
4.1Pilot design: workstations, users and duration4.2Volunteer selection and informed consent4.3Progressive habituation protocol4.4Field biomechanical indicators4.5Comfort and usability questionnaires4.6Productivity and quality indicators4.7Log of incidents and adverse effects4.8Before-and-after statistical analysis4.9Decision criteria for scaling up4.10Case study: shoulder exoskeleton pilot in painting
5.1Direct costs: acquisition, maintenance and training5.2Indirect costs: fitting time and support5.3Cost of musculoskeletal disorders5.4Savings from reduced absenteeism and turnover5.5Productivity and quality improvement5.6NPV, IRR and payback period5.7Cost-benefit and cost-effectiveness analysis5.8Scenarios and sensitivity analysis5.9Intangible benefits and how to value them5.10Practical exercise: ROI model in a spreadsheet
6.1Internal communication plan6.2Training of users and supervisors6.3Ambassadors and reference users6.4Managing sizes, stock and allocation6.5Hygiene, storage and charging6.6Preventive maintenance and repairs6.7Integration into health and safety procedures6.8Common resistance and how to address it6.9Scaling to other plants6.10Workshop: phased deployment plan
7.1Health surveillance of users7.2Indicators of actual use and abandonment7.3Long-term effects and scientific evidence7.4Periodic programme audits7.5Reviewing the risk assessment7.6Technology updates and renewal7.7Data protection for body-worn sensors7.8Annual results report7.9Continual improvement with the PDCA cycle7.10Case study: audit of a programme after two years
8.1Company context and diagnosis8.2Selection of workstations and technology8.3User risk analysis8.4Pilot design8.5Economic model and ROI8.6Deployment and change management plan8.7Health follow-up plan8.8Final recommendation to management8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
100% online training on the SEIUM Institute campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within the intake, which makes the programme compatible with full-time work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Microsoft Excel with financial models, Power BI, Oracle Crystal Ball, Xsens MVN Analyze and LimeSurvey, in free, academic or evaluation versions. Practical work is based on real procedures: field pilots with volunteers and progressive habituation, risk analysis of wearable devices at the workstation and return-on-investment calculation with scenarios. Assessment is continuous by module, plus the final project.
Standards covered: Regulation (EU) 2023/1230 on machinery, ISO 12100:2010, ISO 13482:2014, ISO 13849-1:2023, IEC 62133-2, Spanish Law 31/1995 on Occupational Risk Prevention, ISO 45001:2018.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with Microsoft Excel with financial models, Power BI, Oracle Crystal Ball, Xsens MVN Analyze and LimeSurvey, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer capable of running the programme software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Postgraduate Diploma in In-Line Integration and Process Validation
Online Postgraduate Diploma of 800 hours in In-Line Integration and Process Validation. 8 modules covering ICH Q8(R2), ICH Q9(R1) and SIMCA (Sartorius). Assigned tutor and open…
Postgraduate Diploma in Virtual-Plant Correlation and Ramp-Up
Online 800-hour Postgraduate Diploma in Virtual-Plant Correlation and Ramp-Up. 8 modules covering VDI 3693 Blatt 1, ISO 23247-1:2021 and Siemens Process Simulate. Assigned tutor and enrolment…
Postgraduate Diploma in Advanced Control and Process Optimisation
Online 800 h Postgraduate Diploma in Advanced Control and Process Optimisation. 8 modules covering IEC 61511, IEC 61131-3 and AspenTech DMC3. Dedicated tutor and open enrolment.
More in Robotics, Automation & Control
All Robotics, Automation & Control programmes → · How to apply · Fees & financing · Scholarships