Postgraduate Diploma in In-Line Integration and Process Validation
Online Postgraduate Diploma of 800 hours in In-Line Integration and Process Validation. 8 modules covering ICH Q8(R2), ICH Q9(R1) and SIMCA (Sartorius). Assigned tutor and open enrolment.
Postgraduate Diploma in In-Line Integration and Process Validation — studying from Canada
Canada has a notable robotics and automation sector, with research leadership at institutions such as McGill University, the University of Toronto and the University of Waterloo. Industrial automation firms and integrators serve manufacturing, automotive and resource industries across Ontario, Québec and Alberta. The Canadian Space Agency's robotic systems contribute to space robotics expertise. Engineers work on control systems, industrial robots, mechatronics and automation integration.
Fees for Canada: C$2,010 (Canadian dollar), with instalments and employer sponsorship available.
Relevant bodies in Canada
Typical roles
Questions from Canada
Is this programme recognised by professional bodies in Canada for robotics and control engineering?
SEIUM's qualifications are private, not official state degrees, and are not accredited by any national body in Canada. Professional engineering titles are regulated provincially, for example by Professional Engineers Ontario, and engineering graduates in Canada typically pursue licensure through these bodies. Recognition of a private qualification is decided by employers or the relevant body.
Where could this qualification help in Canada's robotics and automation job market?
Canadian employers in manufacturing, logistics, aerospace, mining and automation integration may hire for robotics and control skills. Whether they value a private qualification is their decision, and many also weigh portfolios, experience and recognised credentials. The final project can demonstrate applied ability, though it does not guarantee any job.
How can I study this while working full time in Canada?
The programme is entirely online and taught in English, so you can study from home across Canadian time zones, and no student visa is needed. Choose from 300-hour specialist courses, 800-hour postgraduate diplomas or 1,900-hour master's programmes. Fees are payable in instalments, employer sponsorship is possible, and you receive an assigned technical tutor.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Integrate sensors and analysers into automated production lines.
Apply the PAT framework and quality by design to industrial processes.
Plan and carry out FAT, SAT and commissioning tests.
Design three-stage process validation strategies.
Implement univariate and multivariate statistical control in-line.
Use digital twins for virtual commissioning.
Manage compliance documentation and change control.
Who it's for
- Validation engineer looking to specialise in In-Line Integration and Process Validation.
- PAT specialist looking to specialise in In-Line Integration and Process Validation.
- Commissioning engineer looking to specialise in In-Line Integration and Process Validation.
- Process engineer looking to specialise in In-Line Integration and Process Validation.
- Production quality manager looking to specialise in In-Line Integration and Process Validation.
- Automation engineer looking to specialise in In-Line Integration and Process Validation.
- Engineering or science graduates seeking to enter the pharmaceutical sector.
What you'll work with
- ICH Q8(R2)
- ICH Q9(R1)
- ICH Q10
- ICH Q2(R2)
- GAMP 5
- EU GMP Anexo 15
- ISO 7870-2
- ASTM E2500
8 modules · 800 h
1.1Architecture of an automated line1.2Mechanical, electrical and data interfaces1.3Insertion points for sensors and analysers1.4Communication with PLC and SCADA1.5Cycle times and synchronisation1.6Management of rejects and deviations1.7Commissioning engineering requirements1.8Integration documentation1.9Space and installation requirements for in-line equipment1.10Practice: integration diagram for an analyser
2.1FDA's PAT framework2.2In-line NIR, Raman and UV analysers2.3Immersion probes and flow cells2.4Representative in-line sampling2.5Quality by Design (QbD)2.6Critical quality attributes and critical process parameters2.7Design space of the process2.8Real-time release2.9Chemometric models for PAT2.10Laboratory: NIR monitoring of blending
3.1FAT and SAT testing3.2Loop and instrumentation testing3.3Commissioning of control software3.4Interface and communications testing3.5Punch list management3.6Production ramp-up3.7Operator training3.8Handover to production3.9Verification of interlocks and safeties3.10Workshop: FAT protocol for an inspection station
4.1Three-stage validation lifecycle4.2Process design4.3Process performance qualification (PPQ)4.4Continued process verification4.5Validation of analytical methods4.6Statistical sampling and acceptance criteria4.7Validation of computerised systems4.8Revalidation after changes4.9Sampling and strategy for validation batches4.10Practice: validation plan for a filling process
5.1Univariate control charts5.2Multivariate statistical process control5.3Capability indices Cpk and Ppk5.4MSA studies of in-line systems5.5Early detection of deviations5.6Trend analysis5.7Process alarm management5.8Annual product review reports5.9Capability analysis for non-normal processes5.10Laboratory: in-line Hotelling T² chart
6.1Digital twin of the line6.2Discrete event simulation6.3Virtual commissioning6.4Validation of process models6.5Hybrid physical and data-driven models6.6Verification of control logic6.7Testing of abnormal scenarios6.8Maintenance of the twin6.9Validation of simulation models with real data6.10Case study: virtual commissioning of a cell
7.1Good manufacturing practice requirements7.2Requirements traceability matrices7.3Deviation management and CAPA7.4Change control7.5Data integrity in analysers7.6Audits and regulatory inspections7.7Archiving and retention of records7.8Validation performance indicators7.9Periodic review of validation status7.10Case study: preparing for a validation audit
8.1Process description and risks8.2In-line integration design8.3Selection of PAT analysers8.4FAT and SAT test plan8.5Validation strategy8.6Statistical process control8.7Compliance documentation8.8Analysis of results8.9Report and presentation8.10Final review with the tutor
How you'll learn
Training 100 % online on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetable: students progress at their own pace within the intake, which makes it possible to combine with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is SIMCA (Sartorius), Siemens SIPAT, Minitab, Siemens Plant Simulation, Siemens TIA Portal, in free, academic or evaluation versions. Trials are studied using real procedures for NIR monitoring of pharmaceutical blending, FAT and SAT testing of inspection stations, and virtual commissioning of automated cells. Assessment is continuous, module by module, plus the final integrating project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Integrate sensors and analysers into automated production lines.
Apply the PAT framework and quality by design to industrial processes.
Plan and carry out FAT, SAT and commissioning tests.
Design three-stage process validation strategies.
Implement univariate and multivariate statistical control in-line.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. A university degree is not required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient level of Spanish to follow the reading of technical regulations.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme comprises 800 total hours spread over 6 to 8 months. That is between 10 and 15 hours per week on average, compatible with a full-time job.
You work with SIMCA (Sartorius), Siemens SIPAT, Minitab, Siemens Plant Simulation, Siemens TIA Portal. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
SEIUM's own diploma upon passing the continuous assessment and the integrating project. It is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or postgraduate diploma in the same area are credited towards the advanced programme. Check the credit transfer policy when you enrol.
Related programmes
Postgraduate Diploma in OPC UA Information Models and Pub-Sub
Online 800 h Postgraduate Diploma in OPC UA Information Models and Pub-Sub. 8 modules covering IEC 62541-1, IEC 62541-3 and UaExpert. Assigned tutor and enrolment open.
Postgraduate Diploma in Testing, Audits and Placing on the Market
Online 800-hour Postgraduate Diploma in Testing, Audits and Placing on the Market. 8 modules covering Regulation (EU) 2023/1230 on machinery, IEC 60204-1:2016 and Fluke 1664 FC…
Postgraduate Diploma in Containers in Industrial Gateways
Online 800-hour Postgraduate Diploma in Containers in Industrial Gateways. 8 modules covering IEC 62443-4-2, IEC 62443-3-3 and Docker. Assigned tutor and open enrolment.
More in Robotics, Automation & Control
All Robotics, Automation & Control programmes → · How to apply · Fees & financing · Scholarships