Diploma in Ground Penetrating Radar (GPR)
Online postgraduate diploma of 800 hours in ground penetrating radar (GPR). 8 modules covering GPR principles, equipment and antennas, data acquisition, processing, interpretation, numerical modelling and special applications under ASTM D6432, ETSI EN 302 066 and ECC Decision (06)08, with ReflexW and an assigned technical tutor.
Diploma in Ground Penetrating Radar (GPR) — studying from Canada
Canada's defence sector is centred on procurement and sustainment through the Department of National Defence and Defence Research and Development Canada. Industrial activity spans land vehicles, naval systems, avionics and electronics, with firms in Ontario, Québec, Nova Scotia and British Columbia. Companies such as General Dynamics Land Systems Canada and Lockheed Martin Canada are notable employers, alongside a broad base of small and medium suppliers. Engineers work on systems integration, vehicle protection, logistics and sustainment, operating within strict security and export control frameworks.
Fees for Canada: C$2,010 (Canadian dollar), with instalments and employer sponsorship available.
Relevant bodies in Canada
Typical roles
Questions from Canada
Which Canadian bodies or processes govern defence engineering recognition?
Defence engineering in Canada often involves government procurement and security clearances, and engineers typically hold provincial Professional Engineer licences where a title is required. SEIUM's qualifications are private and not official state degrees or accredited by a national body, so they do not confer licensing or clearance. Recognition is for employers or the relevant body to decide, so verify this first.
Would Canadian defence or land systems employers accept this training?
Canadian defence employers and contractors generally rely on security clearance, licensing and demonstrated experience. A private qualification may support your application, but it is unlikely to replace those requirements, and its acceptance is up to each employer. A SEIUM final project can help show applied skill, so discuss expectations with prospective employers early.
Can I study remotely while working, and what are the costs and language demands?
Yes, the programmes are fully online, so you can study from Canada or elsewhere without a student visa, and fit sessions around work. Specialist courses are 300 hours, postgraduate diplomas 800 and master's 1,900. Teaching is in English, supported by an assigned technical tutor. Fees are payable in instalments, and employer sponsorship may be available.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand the physical principles of ground penetrating radar.
Select antennas and frequencies according to the target.
Plan and carry out acquisition surveys.
Process and interpret radargrams.
Numerically model propagation in the subsurface.
Apply spectrum regulations and professional practice standards.
Prepare subsurface detection reports.
Who it's for
- GPR technicians.
- Geophysicists.
- Infrastructure inspection engineers.
- Technical archaeologists.
- Subsurface detection specialists.
- Signal processing engineers.
- Engineering or science graduates looking to move into civil engineering.
What you'll work with
- ASTM D6432 (guide for using GPR for subsurface investigation)
- ETSI EN 302 066 (ground- and wall-probing radar imaging applications)
- ECC Decision (06)08 (spectrum use by ground- and wall-probing radar)
- ASCE 38-22 (subsurface utility infrastructure data)
- CWA 14747-1 (test and evaluation of mine action detectors)
- ISO 19115 (geographic metadata)
- ReflexW
- GPR-SLICE
- gprMax
- MATGPR
- QGIS
8 modules
1.1Electromagnetic propagation in the subsurface1.2Permittivity and conductivity of materials1.3Velocity and attenuation1.4Reflection at interfaces1.5Vertical and horizontal resolution1.6Penetration depth1.7Diffraction hyperbolas1.8Noise and clutter1.9Limitations of the method1.10Practical: calculation of velocity and resolution
2.1Architecture of a GPR system2.2Shielded and unshielded antennas2.3Centre frequencies2.4Impulse and stepped-frequency systems2.5Multichannel systems2.6GNSS positioning2.7Odometers and carts2.8Calibration2.9Spectrum regulations2.10Case study: equipment selection for an application
3.1Survey planning3.2Grids and profiles3.3Acquisition parameters3.4Field velocity measurement3.5Ground conditions3.6Field documentation3.7Quality control3.8Safety on public roads3.93D acquisition3.10Lab: acquisition survey in a street
4.1Time-zero correction4.2Background removal4.3Frequency filters4.4Gains4.5Migration4.6Hyperbola velocity analysis4.7Depth slices4.83D visualisation4.9Processing with ReflexW4.10Practical: radargram processing
5.1Recognition of buried utilities5.2Concrete structures5.3Stratigraphy5.4Cavities5.5Archaeological remains5.6Contamination and moisture5.7Interpretation ambiguities5.8Integration with other methods5.9ASCE 38 quality levels5.10Case study: interpretation of an urban profile
6.1Finite-difference time-domain method6.2Models with gprMax6.3Modelling heterogeneous materials6.4Antenna modelling6.5Full-waveform inversion6.6Machine learning in GPR6.7Model validation6.8Synthetic data6.9Comparison with real data6.10Lab: simulation of reflections with gprMax
7.1Mine detection in humanitarian action7.2Dual metal-detector/GPR systems7.3Testing according to CWA 14747-17.4Bridge inspection7.5Tunnels and underground works7.6Glaciology7.7Airborne GPR7.8Non-destructive testing of pavements7.9Reports and professional standards7.10Workshop: subsurface detection report
8.1Definition of the objective8.2Equipment selection8.3Acquisition plan8.4Data processing8.5Supporting numerical modelling8.6Interpretation8.7Technical report8.8Recommendations8.9Report and presentation8.10Final project: final review with your tutor
How you'll learn
A 100% online programme on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so you can combine it with your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is ReflexW, GPR-SLICE, gprMax, MATGPR and QGIS, in free, academic or evaluation versions. Exercises are based on real procedures: locating buried utilities in a street, numerical modelling of reflections with gprMax and inspection of a concrete slab. Assessment is continuous by module, plus the final project.
Standards covered: ASTM D6432, ETSI EN 302 066, ECC Decision (06)08, ASCE 38-22, CWA 14747-1, ISO 19115.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with ReflexW, GPR-SLICE, gprMax, MATGPR and QGIS, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the programme software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Postgraduate Diploma in MIL/NATO Standards for Mechanical Components
Online postgraduate diploma of 800 hours in MIL/NATO standards for mechanical components, with 8 modules covering military standardisation, mechanical design and documentation, materials and treatments, environmental…
Diploma in Submarine Escape and Safety Systems
Online postgraduate diploma of 800 hours in submarine escape and safety systems: 8 modules covering submarine risks, individual escape, rescue, life support, fire and flooding, signalling…
Diploma in Fuel Cycle Economics
Online postgraduate diploma of 800 hours in nuclear fuel cycle economics. 8 modules covering the economic stages of the cycle, uranium and services markets, fuel cost…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships