Diploma in European Nuclear Safety Regulations
Online postgraduate diploma of 800 hours in European nuclear safety regulations, structured in 8 modules covering the Euratom framework, the Nuclear Safety Directive, radiation protection, WENRA reference levels, the Spanish regulatory framework, waste, shipments and safeguards, and international conventions, with an assigned technical tutor.
Diploma in European Nuclear Safety Regulations — studying from Canada
Canada's defence sector is centred on procurement and sustainment through the Department of National Defence and Defence Research and Development Canada. Industrial activity spans land vehicles, naval systems, avionics and electronics, with firms in Ontario, Québec, Nova Scotia and British Columbia. Companies such as General Dynamics Land Systems Canada and Lockheed Martin Canada are notable employers, alongside a broad base of small and medium suppliers. Engineers work on systems integration, vehicle protection, logistics and sustainment, operating within strict security and export control frameworks.
Fees for Canada: C$1,400 (Canadian dollar), with instalments and employer sponsorship available.
Relevant bodies in Canada
Typical roles
Questions from Canada
Which Canadian bodies or processes govern defence engineering recognition?
Defence engineering in Canada often involves government procurement and security clearances, and engineers typically hold provincial Professional Engineer licences where a title is required. SEIUM's qualifications are private and not official state degrees or accredited by a national body, so they do not confer licensing or clearance. Recognition is for employers or the relevant body to decide, so verify this first.
Would Canadian defence or land systems employers accept this training?
Canadian defence employers and contractors generally rely on security clearance, licensing and demonstrated experience. A private qualification may support your application, but it is unlikely to replace those requirements, and its acceptance is up to each employer. A SEIUM final project can help show applied skill, so discuss expectations with prospective employers early.
Can I study remotely while working, and what are the costs and language demands?
Yes, the programmes are fully online, so you can study from Canada or elsewhere without a student visa, and fit sessions around work. Specialist courses are 300 hours, postgraduate diplomas 800 and master's 1,900. Teaching is in English, supported by an assigned technical tutor. Fees are payable in instalments, and employer sponsorship may be available.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand the Euratom legal framework.
Apply the Nuclear Safety Directive.
Interpret European radiation protection regulations.
Use the WENRA reference levels.
Understand the Spanish regulatory framework.
Apply regulations on waste, shipments and safeguards.
Analyse compliance with international conventions.
Who it's for
- Nuclear regulation specialists.
- Legal advisers in the energy sector.
- Licensing engineers.
- Regulatory compliance managers.
- Energy policy analysts.
- Radiation protection technicians.
- Engineering or science graduates seeking to enter the nuclear energy sector.
What you'll work with
- Directive 2014/87/Euratom (EU nuclear safety framework for nuclear installations)
- Directive 2013/59/Euratom (basic safety standards for radiation protection)
- Directive 2011/70/Euratom (management of spent fuel and radioactive waste)
- Law 15/1980 (creation of the Spanish Nuclear Safety Council (CSN))
- Royal Decree 1836/1999 (Spanish regulation on nuclear and radioactive facilities)
- Royal Decree 1029/2022 (Spanish regulation on health protection against ionising radiation)
- WENRA Safety Reference Levels (2020) (harmonised safety reference levels for reactors)
- Convention on Nuclear Safety (1994) (international convention on the safety of nuclear power plants)
- EUR-Lex
- IAEA NUCLEUS
- Zotero
- Microsoft Excel
8 modules
1.1The Euratom Treaty1.2EU competences1.3The European Commission and ENSREG1.4Directives 2009/71 and 2014/871.5Basic Safety Standards Directive 2013/591.6Waste Directive 2011/701.7Directive 2013/51 on drinking water1.8Euratom regulations1.9CJEU case law1.10Case study: monitoring a transposition
2.1Nuclear safety objective2.2Regulatory independence2.3Licensee responsibilities2.4Periodic safety reviews2.5Topical peer reviews2.6Transparency2.7On-site emergency preparedness2.8Stress tests2.9Training and competences2.10Workshop: preparing a topical peer review
3.1Directive 2013/59/Euratom3.2Dose limits3.3Medical exposure3.4Radon in workplaces and dwellings3.5Naturally occurring radioactive materials3.6Emergency exposure situations3.7Royal Decree 1029/20223.8High-activity sealed sources3.9Environmental radiological monitoring3.10Practical exercise: occupational dose assessment
4.1The WENRA association4.22020 reference levels4.3Safety objectives for new reactors4.4Harmonisation between countries4.5National self-assessment4.6Comparisons between regulators4.7Reference levels for waste4.8Influence on national regulations4.9Outstanding challenges4.10Workshop: self-assessment against WENRA levels
5.1Law 25/1964 on nuclear energy5.2Law 15/1980 creating the CSN5.3Royal Decree 1836/19995.4CSN Instructions5.5Safety guides5.6Facility authorisations5.7Inspection and control5.8Penalty regime5.9Relationship with the Ministry5.10Case study: authorisation renewal process
6.1Directive 2011/70/Euratom6.2National management programmes6.3Directive 2006/117/Euratom on shipments6.4Regulation (Euratom) 302/20056.5Transport of radioactive material6.6National inventories6.7International reviews6.8Financing of waste management6.9Reports to the Commission6.10Practical exercise: analysis of a national waste programme
7.1Convention on Nuclear Safety7.2Joint Convention7.3Convention on Early Notification7.4Convention on Assistance7.5Convention on Physical Protection7.6Review meetings7.7Relationship with the IAEA7.8IAEA safety standards7.9IRRS missions7.10Workshop: national report for a review meeting
8.1Scope selection8.2Regulatory map8.3Transposition analysis8.4Comparison between Member States8.5WENRA compliance8.6Gaps identified8.7Improvement proposals8.8Conclusions8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
The programme is 100% online on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so it can be combined with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is EUR-Lex, IAEA NUCLEUS, Zotero and Microsoft Excel, in free, academic or evaluation versions. Exercises are based on real procedures for analysing the transposition of directives, self-assessments against WENRA reference levels and national reports for international conventions. Assessment is continuous by module, plus the final project.
Standards covered: Directive 2014/87/Euratom, Directive 2013/59/Euratom, Directive 2011/70/Euratom, Law 15/1980, Royal Decree 1836/1999, Royal Decree 1029/2022, WENRA Safety Reference Levels (2020), Convention on Nuclear Safety (1994).
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with EUR-Lex, IAEA NUCLEUS, Zotero and Microsoft Excel, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software, and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Military AM Standards and Certification
Online postgraduate diploma of 800 hours in military additive manufacturing (AM) standards and certification. 8 modules covering the AM regulatory landscape, feedstock and process qualification, part…
Diploma in Military Certification and Airworthiness (EMAR/EASA Mil)
Online postgraduate diploma of 800 hours in military certification and airworthiness (EMAR/EASA Mil). 8 modules covering type certification, certification bases, technical disciplines, military design organisations, certification…
Diploma in Stabilisation and Heading Control Systems
Online postgraduate diploma of 800 hours in Stabilisation and Heading Control Systems. 8 modules covering ship dynamics, seakeeping, roll stabilisation, heading control (ISO 11674), track control…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships