Apply now
Master'sElectronics, Embedded Systems & Telecom Applications open

Master’s in Marine/Nautical Electronics: IP67/69K

Online master's programme of 1,900 hours in marine/nautical electronics (IP67/69K, corrosion, NMEA 2000 and on-board power). 12 modules covering the marine environment, IP protection ratings, sealed enclosure design, electronics protection, environmental testing, on-board electrical systems, nautical buses, marine EMC, subsea and offshore equipment, certification and reliability, applied to IEC 60529, ISO 20653 and IEC 60945 with an assigned technical tutor.

Duration12–14 months
ModeOnline
LanguageEnglish
Start datesSet by the faculty
AwardSEIUM Institute diploma
Enrol now View syllabus Ask an advisor

Master’s in Marine/Nautical Electronics: IP67/69K — studying from Australia

Electronics and embedded systems underpin a wide range of Australian industries, including defence, mining automation, medical devices and consumer technology. The telecommunications sector is significant, with ongoing investment in fibre, mobile networks and satellite communications for remote regions. Research organisations such as CSIRO and university groups contribute to advances in sensing, communications and signal processing. Engineers typically work on hardware design, firmware development, testing and certification. Employers include telecommunications carriers, defence contractors, instrumentation companies and product manufacturers.

Fees for Australia: A$11,000 (AUD), with instalments and employer sponsorship available.

Relevant bodies in Australia

  • Australian Communications and Media Authority (ACMA)
  • Engineers Australia
  • Standards Australia
  • Telecommunications Industry Ombudsman

Typical roles

  • Embedded Systems Engineer
  • Electronics Design Engineer
  • Firmware Engineer
  • Telecommunications Engineer

Questions from Australia

Is this qualification recognised for electronics engineering in Australia?

SEIUM's qualifications are private and not official state degrees, and they are not accredited by Engineers Australia or the Australian Communications and Media Authority. Recognition for electronics and telecom roles generally depends on accredited degrees, licences and experience. Employers or the relevant body make the final decision.

Which Australian employers hire embedded and telecom engineers?

Australia has telecommunications carriers, defence electronics firms, medical device makers, mining technology companies and IoT developers. Employers mostly assess your hands-on skills, project record and certifications. Ask prospective employers whether they would consider a private online qualification.

Can I study this part-time while working, and how is it supported?

The courses are 100% online and taught in English, so you can study from anywhere in Australia without needing a student visa. Specialist courses take 300 hours, diplomas 800 and master's 1,900. Each student has an assigned technical tutor, fees are payable in instalments, and employer sponsorship may be possible.

Virtual lab · try it before you enrol

Take the controls.

Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.

SIM · LIVE ●
Learning outcomes

What you will be able to do

01

Analyse the effects of the marine environment on electronics.

02

Interpret and test IP protection ratings.

03

Design sealed, corrosion-resistant enclosures.

04

Protect electronics with coatings and potting.

05

Integrate on-board electrical systems and nautical buses.

06

Plan environmental and EMC testing.

07

Certify marine equipment to the applicable regulations.

Profile

Who it's for

  • Marine electronics engineers.
  • Nautical product engineers.
  • Environmental test engineers.
  • Maritime certification engineers.
  • Mechanical designers of enclosures for harsh environments.
  • Naval electronics technicians.
  • Engineering or science graduates looking to enter the leisure marine sector.
Standards & tools

What you'll work with

  • IEC 60529 (degrees of protection provided by enclosures – IP code)
  • ISO 20653 (road vehicles – degrees of protection, IP69K)
  • IEC 60945 (maritime navigation and radiocommunication equipment – general requirements)
  • IEC 60068-2-52 (cyclic salt mist test)
  • Directive 2014/90/EU (Marine Equipment Directive)
  • Directive 2013/53/EU (Recreational Craft Directive)
  • ISO 13297 (small craft – electrical systems)
  • NMEA 2000 (marine electronics network standard)
  • SolidWorks
  • Ansys Mechanical
  • Altium Designer
  • Actisense NMEA Reader
Syllabus

12 modules

  1. 1.1Salt corrosion
  2. 1.2Humidity and condensation
  3. 1.3Vibration and wave slamming
  4. 1.4Extreme temperatures
  5. 1.5Ultraviolet radiation
  6. 1.6Immersion and spray
  7. 1.7High-pressure cleaning
  8. 1.8Explosive atmospheres on vessels
  9. 1.9Classification society requirements
  10. 1.10Case study: failure analysis of a boat's electronics
  1. 2.1The IEC 60529 standard
  2. 2.2IP67 and IP68 codes
  3. 2.3IP69K rating and ISO 20653
  4. 2.4Dust tests
  5. 2.5Immersion tests
  6. 2.6High-pressure, high-temperature jet tests
  7. 2.7IK impact ratings
  8. 2.8Differences between standards
  9. 2.9Interpreting results
  10. 2.10Lab: water-tightness test of an enclosure
  1. 3.1Materials: marine aluminium, stainless steel and polymers
  2. 3.2O-rings and flat gaskets
  3. 3.3Gasket compression
  4. 3.4Design of lids and fasteners
  5. 3.5Bulkhead fittings and cable glands
  6. 3.6Vent membranes
  7. 3.7Windows and displays
  8. 3.8Galvanic compatibility
  9. 3.9Sealing simulation
  10. 3.10Practical exercise: CAD design of an IP68 enclosure
  1. 4.1Conformal coatings
  2. 4.2Resin potting
  3. 4.3Parylene coatings
  4. 4.4Protection against condensation
  5. 4.5Selection of robust components
  6. 4.6Sealed connectors
  7. 4.7Thermal design in closed enclosures
  8. 4.8Conduction cooling
  9. 4.9Coating tests
  10. 4.10Lab: comparison of coatings in salt spray
  1. 5.1IEC 60945 for navigation equipment
  2. 5.2Salt spray (IEC 60068-2-52)
  3. 5.3Damp heat
  4. 5.4Thermal cycling
  5. 5.5Vibration and shock
  6. 5.6Solar radiation
  7. 5.7Combined tests
  8. 5.8Test planning
  9. 5.9Working with test laboratories
  10. 5.10Practical exercise: environmental test plan for a unit
  1. 6.112, 24 and 48 V systems
  2. 6.2Marine batteries
  3. 6.3Installations to ISO 13297
  4. 6.4Reverse polarity protection
  5. 6.5Cranking transients
  6. 6.6Corrosion in connections
  7. 6.7Charging systems
  8. 6.8Electric and hybrid propulsion
  9. 6.9Electrical safety
  10. 6.10Case study: electrical design of a recreational craft
  1. 7.1NMEA 0183
  2. 7.2NMEA 2000 and CAN
  3. 7.3NMEA OneNet and Ethernet
  4. 7.4Bridge electronics integration
  5. 7.5AIS and GNSS
  6. 7.6Radar and echo sounder
  7. 7.7VHF communications
  8. 7.8Wi-Fi and connectivity
  9. 7.9Maritime cyber security
  10. 7.10Lab: NMEA 2000 network
  1. 8.1IEC 60945 and EMC
  2. 8.2Interference with radio and navigation
  3. 8.3Earthing on vessels
  4. 8.4Cable shielding
  5. 8.5Power supply filters
  6. 8.6Emission tests
  7. 8.7Immunity tests
  8. 8.8Cable segregation
  9. 8.9Typical solutions
  10. 8.10Practical exercise: EMC plan for bridge equipment
  1. 9.1Subsea electronics
  2. 9.2Pressure housings
  3. 9.3Penetrators and wet-mate connectors
  4. 9.4ROVs and AUVs
  5. 9.5Oceanographic sensors
  6. 9.6Power in offshore applications
  7. 9.7Long-term reliability
  8. 9.8Offshore maintenance
  9. 9.9DNV standards
  10. 9.10Workshop: housing concept for 300 m depth
  1. 10.1Marine Equipment Directive 2014/90/EU
  2. 10.2Wheel mark
  3. 10.3Classification societies: DNV, Lloyd's Register and Bureau Veritas
  4. 10.4Recreational Craft Directive
  5. 10.5Radio Equipment Directive
  6. 10.6IEC 61162 standards
  7. 10.7SOLAS and mandatory equipment
  8. 10.8Technical documentation
  9. 10.9Market surveillance
  10. 10.10Case study: certification route for a chartplotter
  1. 11.1Reliability analysis
  2. 11.2Failure modes in the marine environment
  3. 11.3Preventive maintenance
  4. 11.4Remote diagnostics
  5. 11.5Spares and obsolescence
  6. 11.6Warranty and claims
  7. 11.7Accelerated life testing
  8. 11.8Continuous improvement
  9. 11.9Sustainability and recycling
  10. 11.10Practical exercise: FMEA of deck equipment
  1. 12.1Equipment and operating environment
  2. 12.2Protection requirements
  3. 12.3Enclosure design
  4. 12.4Electronics protection
  5. 12.5Interfaces and communications
  6. 12.6Test plan
  7. 12.7Certification route
  8. 12.8Reliability analysis
  9. 12.9Master's Thesis report
  10. 12.10Master's Thesis: defence before a panel
Methodology, software & labs

How you'll learn

Training is 100% online on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so it fits around your job.

Each module combines theory, guided reading of the original standard and applied exercises. The working software is SolidWorks, Ansys Mechanical, Altium Designer and Actisense NMEA Reader, in free, academic or evaluation versions. Testing is studied through real procedures for IP67, IP68 and IP69K water-tightness tests, salt spray tests and vibration and shock tests. Assessment is continuous by module, plus the final Master's Thesis.

Standards covered: IEC 60529, ISO 20653, IEC 60945, IEC 60068-2-52, Directive 2014/90/EU (marine equipment), Directive 2013/53/EU (recreational craft), ISO 13297, NMEA 2000.

Assigned technical tutor:every module ends with a deliverable that your tutor marks individually.
Standards-based learning:guided reading of IEC 60529, ISO 20653 and IEC 60945 applied to real cases, not as a theoretical annex.
Industry software:SolidWorks, Ansys Mechanical, Altium Designer and Actisense NMEA Reader, in free, academic or evaluation versions.
Master's Thesis with defence:Design of a marine electronic unit, from protection requirements and enclosure design to test plan, certification route and reliability analysis, defended before a panel.
Flexible format:100% online, no fixed timetables, compatible with full-time work.
Capstone project

Build it end to end

Your final project follows the real engineering workflow, step by step, reviewed by your tutor.

Environment and requirements
Define the operating environment and IP/IK protection requirements of a marine unit.
IP68 enclosure design
Design a sealed IP68 enclosure in CAD with gaskets and galvanic compatibility.
Electronics and NMEA 2000
Protect the electronics and integrate the unit into an NMEA 2000 network.
Test and certification plan
Plan environmental and EMC tests and the certification route.
Master's Thesis
Complete design of a marine electronic unit with test plan and reliability analysis, defended before a panel.
Career opportunities

Where this takes you

Marine electronics engineerNautical product engineerEnvironmental test engineerMaritime certification engineerEnclosure mechanical design engineerNaval electronics technician
Admissions & scholarships

Requirements

  • University degree in engineering, science or architecture, or equivalent demonstrable professional experience.
  • Internet connection and a computer able to run the programme software.
  • English sufficient to read technical standards.

Ready to start?

Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.

Apply now Scholarships
FAQ

Frequently asked questions

The programme totals 1,900 hours over 12–14 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.

You work with SolidWorks, Ansys Mechanical, Altium Designer and Actisense NMEA Reader, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.

A SEIUM Institute diploma, awarded on passing the continuous assessment and the Master's Thesis. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.

Yes. Modules passed in a course or postgraduate diploma in the same area are recognised in the higher programme. Ask about the recognition policy when you enrol.

A degree in engineering, science or architecture (or equivalent professional experience), a computer able to run the software, and English sufficient to read technical standards.

Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.

Keep exploring

Related programmes

See all in Electronics, Embedded Systems & Telecom
Master'sA$14,200

Master’s in Advanced Antennas and Beamforming

Online master's programme of 1,900 hours in advanced antennas and beamforming (arrays, MIMO, conformal antennas): 12 modules covering antenna theory, antenna types, electromagnetic simulation, arrays, phased…

1,900 hours · 12–14 monthsOnlineElectronics, Embedded Systems & Telecom
Master'sA$11,000

Master’s in Product EMC/EMI

Online master's programme of 1,900 hours in product EMC/EMI (design, shielding, CISPR/IEC standards and testing). 12 modules covering interference sources and mechanisms, PCB design for EMC,…

12–14 monthsOnlineElectronics, Embedded Systems & Telecom
Master'sA$12,600

Master’s in Embedded Observability and Telemetry

Online master's programme of 1,900 hours in embedded observability and telemetry (logging, tracing, metrics and health monitoring). 12 modules covering on-chip debugging and tracing, efficient logging,…

12–14 monthsOnlineElectronics, Embedded Systems & Telecom
Master’s in Marine/Nautical Electronics: IP67/69KEnrol
Related programmes

More in Electronics, Embedded Systems & Telecom

Master’s in Industrial Edge and Data EngineeringView programme →Master’s in High-Speed PCB Design EngineeringView programme →Master’s in Functional Safety in Electronics EngineeringView programme →Master’s in DevOps for Firmware & Connected Devices EngineeringView programme →Master’s in Sensors and Physical InstrumentationView programme →Master’s in DSP and Real-Time Signal ProcessingView programme →

All Electronics, Embedded Systems & Telecom programmes → · How to apply · Fees & financing · Scholarships

Scroll to Top
SEIUM – Institute of Advanced Engineering
Powered by  GDPR Cookie Compliance
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.