Diploma in Reach/Visibility Validation and Interior Usability
Online postgraduate diploma of 800 hours in reach/visibility validation and interior usability: 8 modules covering ergonomic validation planning, reach and interior visibility validation, usability evaluation, test environments, driver distraction and results analysis, with an assigned technical tutor.
Diploma in Reach/Visibility Validation and Interior Usability — studying from Australia
Product design and human-machine interface work is important across Australian industries, from consumer goods and medical devices to mining equipment and transport systems. Designers and engineers collaborate on usability, ergonomics and visual interfaces, with growing attention to accessibility standards and user research. Australia has active design communities in Sydney, Melbourne and Brisbane, supported by universities and design agencies. Employers include manufacturers, software companies, consultancies and in-house product teams in large organisations.
Fees for Australia: A$2,850 (AUD), with instalments and employer sponsorship available.
Relevant bodies in Australia
Typical roles
Questions from Australia
Does a SEIUM qualification count for professional design recognition in Australia?
Australian design practice is recognised through bodies such as the Design Institute of Australia, which runs professional membership, and Engineers Australia covers engineering-related design. SEIUM's private qualifications are not accredited by these bodies. Employers and the relevant body decide whether it counts toward recognition.
Which Australian employers need HMI and product design skills?
Australia has product design studios, software companies, automotive and medical device firms, and consultancies needing interface and product designers. Employers usually look closely at your portfolio and user research work. A SEIUM qualification may complement this, but its weight is determined by each employer.
Can I study this part-time from Australia and what language level is needed?
Yes, the courses are 100% online, so you can study from home across Australia without a student visa. Teaching is in English, so you need solid English proficiency. Durations range from 300 to 1,900 hours, with an assigned technical tutor, instalment payments, and possible employer sponsorship.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Plan the validation of interior reach, visibility and usability.
Measure reach to controls and displays across different populations.
Assess display visibility, reflections and legibility.
Apply standardised usability and workload methods.
Measure distraction using visual occlusion and eye-tracking.
Select the appropriate test environment for each study.
Communicate results and prioritise design improvements.
Who it's for
- Ergonomic validation engineers
- Vehicle usability specialists
- Human factors researchers
- Interior package engineers
- User experience analysts
- HMI engineers
- Engineering or science graduates looking to move into the automotive sector
What you'll work with
- ISO 15007:2020 (measurement of driver visual behaviour)
- ISO 16673:2017 (occlusion method to assess visual demand)
- ISO 9241-11:2018 (usability: definitions and concepts)
- SAE J287 (driver hand control reach)
- ISO 26022:2010 (lane change test)
- Recommendation 2008/653/EC (European Statement of Principles on HMI)
- ISO 15008:2017 (presentation of visual information in vehicles)
- SAE J941 (driver eye ellipses)
- RAMSIS
- Tobii Pro Lab
- SCANeR studio
- Vicon
- SPSS
8 modules
1.1Reach, visibility and usability as attributes1.2Target population and percentiles1.3Accommodation metrics1.4Internal and regulatory requirements1.5Validation planning within the programme1.6Virtual versus physical validation1.7Statistics for user studies1.8Participant ethics and consent1.9Documenting results1.10Workshop: validation plan for an interior
2.1Reach zones according to SAE J2872.2Reach with seat belt fastened2.3Reach to touchscreens2.4Reach to roof and door controls2.5Measurement with articulated arms2.6Reach simulation in RAMSIS2.7Influence of seat adjustment2.8Passenger reach2.9Accessibility for older people2.10Practical: reach study for the central display
3.1Instrument cluster visibility3.2Steering wheel obstruction3.3Head-up display visibility3.4Reflections and glare on displays3.5Night-time visibility and lighting3.6Contrast and legibility3.7Measurement with eye-tracking3.8Interior rear-view mirror visibility3.9Visibility of warnings and tell-tales3.10Lab: windscreen reflection analysis
4.1Methods: user testing, heuristics and walkthrough4.2SUS scale and standardised questionnaires4.3Task times and error rates4.4NASA-TLX workload metrics4.5Think-aloud protocols4.6Usability of displays and infotainment4.7Usability of seats and adjustments4.8Usability of storage and access4.9Qualitative analysis of results4.10Case study: climate control usability test
5.1Seating bucks and adjustable mock-ups5.2Static driving simulators5.3Virtual and mixed reality5.4Tests in real vehicles5.5Motion capture5.6Physiological sensors in testing5.7Video recording and coding5.8Mobile ergonomics laboratories5.9Comparing environments5.10Workshop: preparing a simulator test
6.1Driver distraction guidelines6.2Principles of the European Statement of Principles on HMI6.3Visual occlusion methods6.4Lane change task (LCT)6.5Eyes-off-road glance times6.6Euro NCAP requirements for controls6.7Evaluating secondary tasks6.8Voice and gesture interaction6.9Safe design limits6.10Practical: measuring glance times in a task
7.1Descriptive and inferential statistics7.2Analysis of variance and comparisons7.3Problem identification and severity7.4Prioritising improvements7.5Reports for engineering and design7.6Action tracking7.7Correlation with field data7.8Competitor benchmarking7.9Continuous process improvement7.10Case study: validation report with recommendations
8.1Defining objectives8.2Study design8.3Preparing the environment8.4Reach and visibility tests8.5Usability tests8.6Results analysis8.7Design recommendations8.8Action tracking plan8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so the programme fits around your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is RAMSIS, Tobii Pro Lab, SCANeR studio, Vicon and SPSS, in free, academic or evaluation versions. Testing is studied through real procedures for display reach studies with participants, analysis of display reflections and legibility, and usability tests in a simulator and seating buck. Assessment is continuous by module, plus the final integration project.
Standards covered: ISO 15007:2020 (measurement of driver visual behaviour); ISO 16673:2017 (occlusion method to assess visual demand); ISO 9241-11:2018 (usability: definitions and concepts); SAE J287 (driver hand control reach); ISO 26022:2010 (lane change test); Recommendation 2008/653/EC (European Statement of Principles on HMI); ISO 15008:2017 (presentation of visual information in vehicles); SAE J941 (driver eye ellipses).
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with RAMSIS, Tobii Pro Lab, SCANeR studio, Vicon and SPSS, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software, and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Visible Vortex Management and Flow Features in Bodywork
Online postgraduate diploma of 800 hours in managing visible vortices and flow features on vehicle bodies, structured in 8 modules covering flow structures, visible flow effects,…
Diploma in Seat Design: Foams, Structures and Comfort Mapping
Online postgraduate diploma of 800 hours in seat design: foams, structures and comfort mapping: 8 modules covering seated posture biomechanics, seat structures, foams and comfort materials,…
Diploma in Pipeline Operation, UX, and Continuous Delivery
Online postgraduate diploma of 800 hours in UX pipeline operation and continuous delivery, structured in 8 modules covering design-to-code workflows, CI/CD, automated interface testing, tokens and…
More in Design, HMI & Product
All Design, HMI & Product programmes → · How to apply · Fees & financing · Scholarships