Diploma in Sectoral Standards and Cabin Ergonomics
Online postgraduate diploma of 800 hours in sector standards and cab ergonomics: 8 modules covering applied cab ergonomics, railway cabs, heavy vehicle cabs, mobile machinery cabs, ship bridges, ergonomic assessment methods and regulatory integration, with an assigned technical tutor.
Diploma in Sectoral Standards and Cabin Ergonomics — studying from Australia
Product design and human-machine interface work is important across Australian industries, from consumer goods and medical devices to mining equipment and transport systems. Designers and engineers collaborate on usability, ergonomics and visual interfaces, with growing attention to accessibility standards and user research. Australia has active design communities in Sydney, Melbourne and Brisbane, supported by universities and design agencies. Employers include manufacturers, software companies, consultancies and in-house product teams in large organisations.
Fees for Australia: A$2,050 (AUD), with instalments and employer sponsorship available.
Relevant bodies in Australia
Typical roles
Questions from Australia
Does a SEIUM qualification count for professional design recognition in Australia?
Australian design practice is recognised through bodies such as the Design Institute of Australia, which runs professional membership, and Engineers Australia covers engineering-related design. SEIUM's private qualifications are not accredited by these bodies. Employers and the relevant body decide whether it counts toward recognition.
Which Australian employers need HMI and product design skills?
Australia has product design studios, software companies, automotive and medical device firms, and consultancies needing interface and product designers. Employers usually look closely at your portfolio and user research work. A SEIUM qualification may complement this, but its weight is determined by each employer.
Can I study this part-time from Australia and what language level is needed?
Yes, the courses are 100% online, so you can study from home across Australia without a student visa. Teaching is in English, so you need solid English proficiency. Durations range from 300 to 1,900 hours, with an assigned technical tutor, instalment payments, and possible employer sponsorship.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Apply ergonomic principles to the design of driving and control cabs.
Interpret sector standards for railway, maritime and machinery cabs.
Assess operator visibility, reach and posture.
Analyse the thermal, acoustic and vibration environment of the workstation.
Use digital manikins and simulators to assess cabs.
Build regulatory matrices for multi-sector projects.
Design the conceptual layout of a cab in line with regulations.
Who it's for
- Cab ergonomics engineers
- Human factors specialists
- Interior designers for industrial vehicles
- Certification engineers
- Occupational health and safety consultants
- Rolling stock engineers
- Engineering or science graduates looking to enter the railway sector
What you'll work with
- EN 16186-1 (railway driver's cab: anthropometric data and visibility)
- ISO 6682 (earth-moving machinery: zones of comfort and reach for controls)
- SOLAS Convention Chapter V (safety of navigation)
- ISO 5006 (earth-moving machinery: operator's field of view)
- ISO 3471 (roll-over protective structures, ROPS)
- EN 15227 (crashworthiness of railway vehicle bodies)
- ISO 9241-210 (human-centred design for interactive systems)
- ISO 6396 (earth-moving machinery: noise at the operator's position)
- RAMSIS
- Tecnomatix Jack
- CATIA V5
- Tobii Pro Lab
8 modules
1.1Operator-centred design1.2Anthropometry and design percentiles1.3Fields of view and sight lines1.4Functional reach and control zones1.5Postures and musculoskeletal load1.6Thermal, acoustic and lighting environment1.7Mental workload and sustained attention1.8User diversity and accessibility1.9Postural assessment with RULA and REBA1.10Workshop: postural assessment of a driving position
2.1Cab dimensions to EN 16186-12.2Integration of displays and controls to EN 16186-22.3TSIs for locomotives and passenger rolling stock2.4Forward visibility and visibility of lateral signals2.5Driver's seat and its adjustment2.6ERTMS/ETCS DMI interface2.7Cab air conditioning to EN 148132.8Crashworthiness to EN 152272.9Access and emergency exits2.10Case study: audit of a regional train cab
3.1UNECE requirements for trucks and buses3.2Elongated cabs and Directive (EU) 2015/7193.3Driver direct vision and blind spots3.4Bus driver workstation3.5Mirrors and cameras to UNECE Regulation 463.6Controls and tell-tales to UNECE Regulation 1213.7Suspension seat and vibration3.8Sleeper berth and habitability on long-haul routes3.9Tachograph and driving times3.10Practical exercise: direct vision analysis with a digital manikin
4.1Comfort and reach zones to ISO 66824.2Operator visibility to ISO 50064.3ROPS and FOPS structures: ISO 3471 and ISO 34494.4Pressurisation and filtration to EN 156954.5Noise at the operator station to ISO 63964.6Whole-body vibration4.7Operator controls to ISO 109684.8Displays and assistance systems4.9Regulation (EU) 2023/1230 on machinery4.10Case study: redesign of excavator controls
5.1SOLAS Convention, Chapter V5.2MSC/Circ.982 ergonomic guidelines5.3Integrated navigation systems to IEC 61924-25.4Bridge visibility to SOLAS V/225.5Consoles and equipment layout5.6Bridge alert management5.7Night lighting and visual adaptation5.8Ship motions and motion sickness5.9Ergonomics of the engine control room5.10Workshop: layout of a bridge console
6.1Digital manikins and simulation6.2Full-scale mock-ups6.3Hierarchical task analysis6.4NASA-TLX and SUS questionnaires6.5Operator eye tracking6.6Driving and navigation simulators6.7Vibration and noise measurement6.8Thermal comfort with PMV and PPD indices6.9Trials with representative users6.10Laboratory: reach study with a digital manikin
7.1Map of applicable sector standards7.2Conformity assessment by sector7.3Notified bodies and classification societies7.4Cab technical file7.5Traceability of ergonomic requirements7.6Human-centred design to ISO 9241-2107.7Human factors in safety analysis7.8Monitoring regulatory changes7.9Ergonomic compliance audits7.10Case study: multi-sector regulatory matrix
8.1Selection of the sector and vehicle8.2User and task analysis8.3Applicable regulatory requirements8.4Conceptual cab layout8.5Visibility and reach study8.6Environmental assessment of the workstation8.7Validation with a digital manikin8.8Cab certification plan8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable materials, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within the intake, so you can combine the programme with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is RAMSIS, Tecnomatix Jack, CATIA V5 and Tobii Pro Lab, in free, academic or evaluation versions. Work is based on real procedures: ergonomic audits of railway and machinery cabs, visibility studies with digital manikins and workload assessments in simulators. Assessment is continuous for each module, plus the final project.
Standards covered: EN 16186-1, ISO 6682, SOLAS Convention Chapter V, ISO 5006, ISO 3471, EN 15227, ISO 9241-210, ISO 6396.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- Internet connection and a computer able to run the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with RAMSIS, Tecnomatix Jack, CATIA V5 and Tobii Pro Lab, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software, and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Omnichannel Orchestration and Experience KPIs
Online postgraduate diploma of 800 hours in omnichannel orchestration and experience KPIs: 8 modules covering omnichannel strategy, customer data platforms, journey orchestration, contact centre and conversational…
Diploma in Applied LCA and Product Eco-KPIs
Online postgraduate diploma of 800 hours in applied LCA and product eco-KPIs: 8 modules covering life cycle thinking, goal, scope and inventory, impact assessment, electric vehicle…
Diploma in Branding Language for 2R and Pilot Ergonomics
Online postgraduate diploma of 800 hours in brand language for two-wheelers and rider ergonomics: 8 modules covering motorcycle brand identity, form language and proportions, rider anthropometry,…
More in Design, HMI & Product
All Design, HMI & Product programmes → · How to apply · Fees & financing · Scholarships