Diploma in NATO Regulations and Standards for Critical Autonomy
Online postgraduate diploma of 800 hours in NATO regulations and standards for critical autonomy. 8 modules covering autonomy standardisation, NATO standards for unmanned systems (STANAG 4586, STANAG 4671), functional safety and SOTIF, software and avionics, AI and ethics standards, V&V of autonomy and interoperability, with an assigned technical tutor.
Diploma in NATO Regulations and Standards for Critical Autonomy — studying from Australia
Defence is one of Australia's largest engineering employers, with major programmes in land systems, naval platforms, aircraft and integrated systems managed through the Department of Defence. Land systems engineering supports armoured vehicles, weapons and logistics equipment, often through prime contractors and local industry partners. Industry involvement is strongly encouraged through the Defence industry policy framework. Engineers work on sustainment, capability development, systems integration and safety assurance, typically in Canberra, Adelaide, Melbourne and regional defence precincts.
Fees for Australia: A$2,380 (AUD), with instalments and employer sponsorship available.
Relevant bodies in Australia
Typical roles
Questions from Australia
How does defence engineering recognition work in Australia?
Defence engineering in Australia is largely run through the Department of Defence and its industry partners, which set their own security clearance and qualification requirements. Engineers Australia is the professional body for accreditation. SEIUM's private qualifications are not accredited by these bodies, so recognition is for employers or the relevant body to decide.
Which Australian employers hire in defence and land systems?
Australia has defence prime contractors, the Department of Defence, and specialist land systems firms. Many of these roles require Australian security clearances, which depend on citizenship and background checks rather than course completion. Ask employers how they weigh private qualifications against experience and clearance requirements.
Is the course manageable with a job, and does it need a visa?
The programmes are 100% online and taught in English, so you can study from Australia without a student visa. Specialist courses take 300 hours, diplomas 800 and master's 1,900. An assigned technical tutor supports you, fees are payable in instalments, and employer sponsorship may be possible.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand the regulatory landscape of autonomy.
Apply NATO standards for unmanned systems.
Integrate functional safety and SOTIF.
Apply software and avionics standards to autonomous systems.
Incorporate AI and ethics standards.
Plan the verification and validation of autonomy.
Ensure the interoperability of autonomous systems.
Who it's for
- Standardisation engineers working on autonomous defence systems.
- Autonomous systems engineers who need to design to STANAG and safety standards.
- Functional safety engineers applying IEC 61508, ISO 26262 or ISO 21448.
- Certification specialists dealing with UAS and autonomous platforms.
- V&V engineers responsible for testing autonomous functions.
- Compliance consultants advising on AI and autonomy regulation.
- Engineering or science graduates seeking to enter the defence sector.
What you'll work with
- STANAG 4586 (UAV control system interoperability)
- STANAG 4671 (UAV systems airworthiness requirements)
- IEC 61508 (functional safety of electrical/electronic/programmable systems)
- ISO 21448:2022 (safety of the intended functionality, SOTIF)
- UL 4600 (safety of autonomous products)
- RTCA DO-178C (airborne software certification)
- SAE AS5669 (JAUS, Joint Architecture for Unmanned Systems)
- ISO/IEC 22989:2022 (artificial intelligence concepts and terminology)
- Cameo Systems Modeler
- IBM DOORS
- ROS 2
- Gazebo
- MATLAB
8 modules
1.1Levels of autonomy1.2The need for standards1.3Bodies: NSO, ISO, IEEE, SAE and EUROCAE1.4Current regulatory landscape1.5Interoperability1.6Safety1.7Ethics1.8Regulatory gaps1.9Standardisation governance1.10Case study: regulatory map of an autonomous system
2.1STANAG 45862.2STANAG 46712.3STANAG 47032.4STANAG 47022.5AEP-4586 publication2.6Interoperability of control stations2.7UAS airworthiness2.8Standards for ground vehicles2.9Ratification and implementation2.10Workshop: STANAG 4586 interoperability analysis
3.1IEC 615083.2ISO 262623.3ISO 214483.4UL 46003.5ISO/PAS 88003.6Application in defence3.7Operational design domain3.8Fallback strategies3.9Integration of standards3.10Practical exercise: SOTIF analysis of an autonomous function
4.1DO-178C4.2DO-2544.3ARP4754A4.4SORA methodology4.5RTCA DO-365 detect and avoid4.6Adaptive software4.7Certification of algorithms4.8Monitoring architectures4.9Qualified tools4.10Lab: requirements traceability in DOORS
5.1ISO/IEC 420015.2ISO/IEC 229895.3IEEE 70005.4IEEE 70015.5NATO AI principles5.6Directive 3000.095.7EU AI Act5.8Transparency requirements5.9Human control5.10Case study: matrix of standardised ethical requirements
6.1IEEE 10126.2Scenario-based testing6.3Simulation6.4Performance metrics6.5Field testing6.6Assurance cases6.7Scenario coverage6.8Robustness testing6.9Continuous assessment6.10Workshop: V&V plan for an autonomous function
7.1Open architectures7.2SAE AS5669 JAUS7.3ROS 2 in defence7.4Data formats7.5Information models7.6Cybersecurity of autonomy7.7Version management7.8Interoperability testing7.9Supplier ecosystems7.10Practical exercise: integration with JAUS messages
8.1System description8.2Regulatory map8.3Safety requirements8.4Ethical requirements8.5Interoperability requirements8.6V&V plan8.7Compliance matrix8.8Conclusions8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
The programme is delivered 100% online on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so you can combine it with your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Cameo Systems Modeler, IBM DOORS, ROS 2, Gazebo and MATLAB, in free, academic or evaluation versions. Testing is studied through real procedures for control station interoperability analysis, V&V plans for autonomous functions and regulatory compliance matrices. Assessment is continuous by module, plus the final project.
Standards covered: STANAG 4586, STANAG 4671, IEC 61508, ISO 21448:2022, UL 4600, RTCA DO-178C, SAE AS5669 (JAUS), ISO/IEC 22989:2022.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer able to run the programme's software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with Cameo Systems Modeler, IBM DOORS, ROS 2, Gazebo and MATLAB, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software, and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Validation of Multispectral Signatures
Online postgraduate diploma of 800 hours in the validation of multispectral signatures, structured in 8 modules covering detectability, visible, infrared and radar signatures, signature modelling and…
Diploma in Ethics in Critical PNT Applications
Online postgraduate diploma of 800 hours in ethics in critical PNT applications. 8 modules covering societal dependence on PNT, ethics of critical infrastructure, privacy and location,…
Diploma in Human-Machine Interfaces on the Ship’s Bridge
Online postgraduate diploma of 800 hours in human-machine interfaces on the ship's bridge. 8 modules covering the bridge, maritime human factors, display systems, interface design, automation…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships