Diploma in Critical Defence Supply Chain
Online postgraduate diploma of 800 hours in Critical Defence Supply Chain. 8 modules covering critical defence supply chains, counterfeit prevention (SAE AS5553, AS6174), obsolescence and DMSMS, supplier cybersecurity (DFARS, NIST SP 800-171, CMMC), supplier security and resilience, strategic materials and a comprehensive security programme, with an assigned technical tutor.
Diploma in Critical Defence Supply Chain — studying from Australia
Defence is one of Australia's largest engineering employers, with major programmes in land systems, naval platforms, aircraft and integrated systems managed through the Department of Defence. Land systems engineering supports armoured vehicles, weapons and logistics equipment, often through prime contractors and local industry partners. Industry involvement is strongly encouraged through the Defence industry policy framework. Engineers work on sustainment, capability development, systems integration and safety assurance, typically in Canberra, Adelaide, Melbourne and regional defence precincts.
Fees for Australia: A$2,850 (AUD), with instalments and employer sponsorship available.
Relevant bodies in Australia
Typical roles
Questions from Australia
How does defence engineering recognition work in Australia?
Defence engineering in Australia is largely run through the Department of Defence and its industry partners, which set their own security clearance and qualification requirements. Engineers Australia is the professional body for accreditation. SEIUM's private qualifications are not accredited by these bodies, so recognition is for employers or the relevant body to decide.
Which Australian employers hire in defence and land systems?
Australia has defence prime contractors, the Department of Defence, and specialist land systems firms. Many of these roles require Australian security clearances, which depend on citizenship and background checks rather than course completion. Ask employers how they weigh private qualifications against experience and clearance requirements.
Is the course manageable with a job, and does it need a visa?
The programmes are 100% online and taught in English, so you can study from Australia without a student visa. Specialist courses take 300 hours, diplomas 800 and master's 1,900. An assigned technical tutor supports you, fees are payable in instalments, and employer sponsorship may be possible.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand the critical nature of defence supply chains.
Prevent and detect counterfeit components in line with SAE standards.
Manage component obsolescence and shortages.
Apply cybersecurity requirements to defence suppliers.
Assess the resilience and security of critical suppliers.
Manage strategic materials and industrial capabilities.
Implement comprehensive supply chain security programmes.
Who it's for
- Defence supply chain managers.
- Electronic components engineers.
- Obsolescence managers.
- Supplier cybersecurity managers.
- Procurement quality auditors.
- Supply risk analysts.
- Engineering or science graduates seeking to enter the defence industry.
What you'll work with
- SAE AS5553 (counterfeit electronic parts avoidance)
- SAE AS6174 (counterfeit materiel)
- DFARS 252.204-7012 (safeguarding covered defence information)
- CMMC 2.0 (32 CFR Part 170, Cybersecurity Maturity Model Certification)
- NIST SP 800-171 (protecting controlled unclassified information)
- NIST SP 800-161r1 (cyber supply chain risk management)
- SD-22 (DoD DMSMS guidebook)
- ISO 28000 (supply chain security management)
- SAP Ariba
- Siemens Teamcenter
- SiliconExpert
- Power BI
8 modules
1.1Particular features of defence supply1.2Critical components and materials1.3The defence industrial base1.4Single-source suppliers1.5Short lead times and low volumes1.6Long life cycles1.7Lessons from recent crises1.8National and European strategies1.9Criticality indicators1.10Case study: criticality analysis of a system
2.1Types of counterfeit2.2SAE AS55532.3SAE AS61742.4Authorised sources2.5Visual and X-ray inspection2.6Electrical and destructive testing2.7Reporting suspect parts2.8Alert databases2.9Contractual responsibilities2.10Lab: inspection of suspect components
3.1DMSMS management according to SD-223.2Life cycle monitoring3.3Last-time buys3.4Substitution and requalification3.5Redesign3.6Component emulation3.7Long-term storage3.8The cost of obsolescence3.9Forecasting tools3.10Practical exercise: obsolescence management plan
4.1DFARS 252.204-70124.2NIST SP 800-1714.3The CMMC 2.0 model4.4NIST SP 800-161r14.5Controlled unclassified information4.6Third-party assessments4.7Incident reporting4.8Flow-down requirements in the supply chain4.9European equivalents4.10Practical exercise: self-assessment against NIST SP 800-171
5.1Assessment of critical suppliers5.2Foreign ownership and control5.3Physical and personnel security5.4Supplier continuity5.5Surge production capacity5.6Diversification5.7Strategic reserves5.8Supplier audits5.9Performance indicators5.10Case study: assessment of a single-source supplier
6.1Critical raw materials6.2Rare earths6.3Specialty metals6.4Energetic materials: general regulatory framework6.5Semiconductors6.6Recycling and recovery6.7European regulation6.8Origin requirements6.9Strategic stockpiling6.10Workshop: dependency analysis for a critical material
7.1Supply chain governance7.2ISO 280007.3Integrating quality, security and cybersecurity7.4Digital tools7.5Traceability7.6Training7.7Indicators7.8Continuous improvement7.9Public-private cooperation7.10Practical exercise: designing a supply chain security programme
8.1System selection8.2Criticality analysis8.3Anti-counterfeit plan8.4Obsolescence plan8.5Cybersecurity requirements8.6Supplier assessment8.7Comprehensive programme8.8Monitoring indicators8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so the programme fits around your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is SAP Ariba, Siemens Teamcenter, SiliconExpert and Power BI, in free, academic or evaluation versions. Practical work is based on real procedures: inspecting suspect electronic components, an obsolescence management plan for a system and a NIST SP 800-171 compliance self-assessment. Assessment is continuous by module, plus the final project.
Standards covered: SAE AS5553, SAE AS6174, DFARS 252.204-7012, CMMC 2.0 (32 CFR Part 170), NIST SP 800-171, NIST SP 800-161r1, SD-22, ISO 28000.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with SAP Ariba, Siemens Teamcenter, SiliconExpert and Power BI, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software, and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Radar and LO Signature Management
Online postgraduate diploma of 800 hours in radar and low-observable (LO) signature management. 8 modules covering signature as a system requirement, budgets and allocation, integrated LO…
Diploma in Mechanical and Thermal Design of Fuel Assemblies
Online postgraduate diploma of 800 hours in mechanical and thermal design of fuel assemblies. 8 modules covering assembly components, rod heat transfer, channel thermal-hydraulics, thermomechanical behaviour,…
Diploma in INS/Visual Navigation in GPS-Denied Environments
Online postgraduate diploma of 800 hours in INS/visual navigation in GPS-denied environments. 8 modules covering inertial navigation, inertial sensor characterisation, visual odometry, INS/visual fusion, multi-sensor calibration,…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships