Diploma in International Trends in Reactor Technologies
Online postgraduate diploma of 800 hours in international trends in reactor technologies. 8 modules covering the global nuclear landscape, advanced light water reactors, small modular reactors, Generation IV reactors, nuclear fusion, fuels and the fuel cycle, and regulation, society and foresight, with an assigned technical tutor.
Diploma in International Trends in Reactor Technologies — studying from Australia
Defence is one of Australia's largest engineering employers, with major programmes in land systems, naval platforms, aircraft and integrated systems managed through the Department of Defence. Land systems engineering supports armoured vehicles, weapons and logistics equipment, often through prime contractors and local industry partners. Industry involvement is strongly encouraged through the Defence industry policy framework. Engineers work on sustainment, capability development, systems integration and safety assurance, typically in Canberra, Adelaide, Melbourne and regional defence precincts.
Fees for Australia: A$1,420 (AUD), with instalments and employer sponsorship available.
Relevant bodies in Australia
Typical roles
Questions from Australia
How does defence engineering recognition work in Australia?
Defence engineering in Australia is largely run through the Department of Defence and its industry partners, which set their own security clearance and qualification requirements. Engineers Australia is the professional body for accreditation. SEIUM's private qualifications are not accredited by these bodies, so recognition is for employers or the relevant body to decide.
Which Australian employers hire in defence and land systems?
Australia has defence prime contractors, the Department of Defence, and specialist land systems firms. Many of these roles require Australian security clearances, which depend on citizenship and background checks rather than course completion. Ask employers how they weigh private qualifications against experience and clearance requirements.
Is the course manageable with a job, and does it need a visa?
The programmes are 100% online and taught in English, so you can study from Australia without a student visa. Specialist courses take 300 hours, diplomas 800 and master's 1,900. An assigned technical tutor supports you, fees are payable in instalments, and employer sponsorship may be possible.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Analyse the global landscape of nuclear energy.
Compare advanced light water reactor designs.
Assess the potential of small modular reactors.
Understand Generation IV concepts.
Know the state of fusion research.
Analyse trends in the fuel cycle.
Produce technological and regulatory foresight analyses.
Who it's for
- Nuclear technology analysts.
- Reactor design engineers.
- Energy consultants advising on new-build or energy strategy.
- Licensing engineers.
- Fusion researchers.
- Energy policy analysts.
- Engineering or science graduates seeking to enter the nuclear energy sector.
What you'll work with
- IAEA SSR-2/1 Rev. 1 (safety of nuclear power plants: design)
- WENRA Safety Reference Levels (European harmonised safety levels)
- Treaty on the Non-Proliferation of Nuclear Weapons (1968) (non-proliferation)
- 10 CFR 52 (licences and certifications for power plants)
- Delegated Regulation (EU) 2022/1214 (EU taxonomy)
- IAEA SSG-12 (licensing of nuclear installations)
- OpenMC
- Serpent
- RELAP5
- MATLAB
- Python pandas
8 modules
1.1The global nuclear fleet1.2Reactor generations1.3National energy policies1.4The EU taxonomy and nuclear power1.5Decarbonisation and the role of nuclear1.6The fuel chain1.7Markets and financing1.8Public opinion1.9International organisations1.10Case study: comparison of national strategies
2.1Generation III+2.2The EPR and its experience2.3AP1000 and passive safety2.4Hualong One2.5APR14002.6VVER-12002.7Construction lessons2.8Schedules and costs2.9Long-term operation2.10Workshop: comparison of passive safety systems
3.1The SMR concept3.2NuScale and its licensing3.3BWRX-3003.4Rolls-Royce SMR3.5Microreactors3.6Modular manufacturing3.7Cogeneration applications3.8Licensing challenges3.9European Industrial Alliance on SMRs3.10Case study: analysis of an SMR project
4.1Generation IV International Forum4.2Sodium-cooled fast reactors4.3Lead-cooled reactors4.4High-temperature reactors4.5Molten salt reactors4.6Gas-cooled fast reactors4.7Closing the fuel cycle4.8TRISO fuel4.9Status of demonstrators4.10Practical exercise: comparative analysis of Gen IV concepts
5.1Fusion physics5.2Magnetic confinement: tokamak and stellarator5.3ITER and its status5.4European DEMO5.5Inertial fusion and NIF5.6Private initiatives5.7Materials and tritium5.8IFMIF-DONES in Granada5.9Fusion regulation5.10Case study: the EUROfusion roadmap
6.1Accident-tolerant fuels6.2HALEU and its supply6.3Reprocessing and recycling6.4High-level waste management6.5Deep geological disposal6.6Onkalo in Finland6.7Non-proliferation and safeguards6.8Nuclear security6.9Transport of nuclear material6.10Workshop: fuel cycle mass balance
7.1Comparative licensing7.2WENRA harmonisation7.3IAEA NHSI initiative7.4Social acceptance7.5Intergenerational ethics7.6Economics of new-build projects7.7Digitalisation and artificial intelligence7.8Nuclear hydrogen7.9Scenarios to 20507.10Case study: analysis of energy scenarios
8.1Technology selection8.2State of the art8.3Technical analysis8.4Safety analysis8.5Economic analysis8.6Regulatory framework8.7Foresight8.8Conclusions8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
100% online programme on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so the programme fits around your job.
Each module combines theory, guided reading of the original standard and applied exercises. You work with OpenMC, Serpent, RELAP5, MATLAB and Python pandas, in free, academic or evaluation versions. Practical work is based on real procedures: comparative analyses of reactor designs, techno-economic studies of projects and fuel cycle mass balances. Assessment is continuous by module, plus the final project.
Standards covered: IAEA SSR-2/1 Rev. 1, WENRA Safety Reference Levels, Treaty on the Non-Proliferation of Nuclear Weapons (1968), 10 CFR 52, Delegated Regulation (EU) 2022/1214 and IAEA SSG-12.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with OpenMC, Serpent, RELAP5, MATLAB and Python pandas, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Postgraduate Diploma in Ethical Design and Dual Use of Military Technology
Online postgraduate diploma of 800 hours in ethical design and dual use of military technology, with 8 modules covering technology and society, the dual-use regulatory framework,…
Diploma in Obstacle Countermeasures and Ethical Standards
Online postgraduate diploma of 800 hours in obstacle countermeasures and ethical standards, structured in 8 modules covering obstacles and mobility, engineer equipment, route opening, safety around…
Diploma in the Ethics of Military Decarbonisation
600-hour online postgraduate diploma in the ethics of military decarbonisation: defence carbon footprint, climate commitments, ethical dilemmas, greenwashing, bases and supply chain, with an assigned tutor.
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships