Diploma in Obstacle Countermeasures and Ethical Standards
Online postgraduate diploma of 800 hours in obstacle countermeasures and ethical standards, structured in 8 modules covering obstacles and mobility, engineer equipment, route opening, safety around explosive remnants, the legal framework, ethics and engineering in emergencies, with an assigned technical tutor.
Diploma in Obstacle Countermeasures and Ethical Standards — studying from Australia
Defence is one of Australia's largest engineering employers, with major programmes in land systems, naval platforms, aircraft and integrated systems managed through the Department of Defence. Land systems engineering supports armoured vehicles, weapons and logistics equipment, often through prime contractors and local industry partners. Industry involvement is strongly encouraged through the Defence industry policy framework. Engineers work on sustainment, capability development, systems integration and safety assurance, typically in Canberra, Adelaide, Melbourne and regional defence precincts.
Fees for Australia: A$2,380 (AUD), with instalments and employer sponsorship available.
Relevant bodies in Australia
Typical roles
Questions from Australia
How does defence engineering recognition work in Australia?
Defence engineering in Australia is largely run through the Department of Defence and its industry partners, which set their own security clearance and qualification requirements. Engineers Australia is the professional body for accreditation. SEIUM's private qualifications are not accredited by these bodies, so recognition is for employers or the relevant body to decide.
Which Australian employers hire in defence and land systems?
Australia has defence prime contractors, the Department of Defence, and specialist land systems firms. Many of these roles require Australian security clearances, which depend on citizenship and background checks rather than course completion. Ask employers how they weigh private qualifications against experience and clearance requirements.
Is the course manageable with a job, and does it need a visa?
The programmes are 100% online and taught in English, so you can study from Australia without a student visa. Specialist courses take 300 hours, diplomas 800 and master's 1,900. An assigned technical tutor supports you, fees are payable in instalments, and employer sponsorship may be possible.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Classify obstacles and assess mobility across terrain.
Select appropriate engineer equipment.
Plan route opening and maintenance.
Apply safety measures around explosive remnants.
Know the applicable international legal framework.
Assess the ethical impact of operations on the population.
Coordinate engineering work in emergency situations.
Who it's for
- Mobility engineers.
- Engineer officers.
- Emergency technicians.
- Humanitarian law advisers.
- Reconstruction managers.
- Civil works engineers supporting emergency response.
- Engineering or science graduates looking to move into defence.
What you'll work with
- STANAG 2021 (military load classification of bridges, ferries, rafts and vehicles)
- Ottawa Convention (1997) (Anti-Personnel Mine Ban Convention)
- CCW Amended Protocol II (mines, booby-traps and other devices)
- CCW Protocol V (explosive remnants of war)
- 1954 Hague Convention (protection of cultural property in armed conflict)
- ENMOD Convention (prohibition of environmental modification techniques)
- Oslo Guidelines (use of military assets in disaster relief)
- QGIS
- ArcGIS Pro
- AutoCAD Civil 3D
- SAP2000
8 modules
1.1Classification of natural and artificial obstacles1.2Allied engineer doctrine1.3Terrain and trafficability1.4Water obstacles1.5Rubble in urban environments1.6Damage to infrastructure1.7Route assessment1.8MLC classification under STANAG 20211.9Bridge capacity1.10Practical exercise: MLC classification of a bridge
2.1Earthmoving machinery2.2Engineer vehicles2.3Modular and floating bridges2.4Gap-crossing equipment2.5Rubble removal2.6Equipment maintenance2.7Machinery safety2.8Equipment logistics2.9Selection criteria2.10Case study: equipment to reopen a road after an earthquake
3.1Route reconnaissance3.2Road repair3.3Water crossings3.4Temporary tracks3.5Drainage3.6Construction materials3.7Basic geotechnics3.8Effort estimation3.9Works planning3.10Workshop: repair plan for a road section
4.1Risk of explosive remnants of war4.2Coordination with accredited specialists4.3IMAS standards on routes4.4Hazard marking4.5Personnel safety4.6Risk education4.7Information management4.8Route release4.9Responsibilities4.10Case study: safety protocol following a find
5.1Ottawa Convention5.2CCW Amended Protocol II5.3CCW Protocol V5.41954 Hague Convention5.5ENMOD Convention5.6Principles of IHL5.7Recording of obstacles5.8Post-conflict obligations5.9Spanish legislation5.10Case study: recording obligations after a conflict
6.1Impact on the civilian population6.2Forced displacement6.3Civilian infrastructure6.4Proportionality6.5Environmental protection6.6The do-no-harm principle6.7Cultural heritage6.8Reconstruction6.9Community participation6.10Case study: dilemma over reopening a road
7.1Disaster engineering7.2Spanish Military Emergencies Unit (UME)7.3EU Civil Protection Mechanism7.4Floods7.5Earthquakes7.6Oslo Guidelines7.7Emergency logistics7.8Lessons from the 2024 DANA floods7.9Evaluation of the response7.10Case study: lessons from a recent emergency
8.1Study scenario8.2Obstacle assessment8.3Route opening plan8.4Equipment selection8.5Safety measures8.6Legal analysis8.7Ethical analysis8.8Civil-military coordination plan8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
A 100% online programme on the SEIUM campus, with downloadable materials, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so it fits around your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is QGIS, ArcGIS Pro, AutoCAD Civil 3D and SAP2000, in free, academic or evaluation versions. Practical work is based on real procedures: bridge capacity classification, route reconnaissance and emergency support exercises. Assessment is continuous by module, plus the final project.
Standards covered: STANAG 2021, Ottawa Convention (1997), CCW Amended Protocol II, CCW Protocol V, 1954 Hague Convention, ENMOD Convention, Oslo Guidelines.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with QGIS, ArcGIS Pro, AutoCAD Civil 3D and SAP2000, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in International Transfer Auditing
Online postgraduate diploma of 800 hours in international transfer auditing, structured in 8 modules covering the international transfer control regime, Spanish and European regulations, extraterritorial rules,…
Diploma in PNT Certification in Defence
Online postgraduate diploma of 800 hours in PNT certification in defence: 8 modules covering PNT on military platforms, certification requirements and bases (MIL-HDBK-516C, RTCA DO-229, TSO-C145),…
Diploma in MIL-STD-461/464: Military EMC/EMI
Online postgraduate diploma of 800 hours in military EMC/EMI to MIL-STD-461/464. 8 modules covering electromagnetic compatibility fundamentals, MIL-STD-461G, laboratory testing, system-level MIL-STD-464C, design for EMC, diagnosis…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships