Apply now
Postgraduate DiplomaRestoration & Classics Applications open

Diploma in Advanced Torque Vectoring in Motorsport

Online postgraduate diploma of 800 hours in advanced torque vectoring in motorsport, structured in 8 modules covering lateral dynamics and torque distribution, vectoring architectures, vehicle state estimation, yaw control strategies, simulation and virtual validation, track tuning, and functional safety and software, with an assigned technical tutor.

Duration6–8 months
ModeOnline
LanguageEnglish
Start datesSet by the faculty
AwardSEIUM Institute diploma
Enrol now View syllabus Ask an advisor

Diploma in Advanced Torque Vectoring in Motorsport — studying from Australia

Restoration of classic vehicles and heritage machinery is a valued pursuit in Australia, supported by active car clubs, museums and a dedicated enthusiast community. Engineers and skilled restorers work on historical preservation, parts sourcing, engine rebuilding and compliance with vehicle registration requirements. The heritage and collectable vehicle market supports specialist workshops, parts suppliers and appraisal services. Employers include restoration workshops, museums, specialist importers and heritage organisations.

Fees for Australia: A$1,740 (AUD), with instalments and employer sponsorship available.

Relevant bodies in Australia

  • Confederation of Australian Motor Sport (CAMS)
  • Historic Motoring Club of Australia
  • National Museum of Australia
  • Standards Australia

Typical roles

  • Classic Vehicle Restorer
  • Restoration Engineer
  • Heritage Machinery Specialist
  • Conservation Technician

Questions from Australia

Is this training recognised by any Australian heritage or automotive restoration body?

SEIUM qualifications are private and not accredited by any Australian national body or heritage authority. Recognition is decided by employers and individual clients. Heritage listings and vehicle registration are governed by state authorities, so check their requirements separately if they affect your work.

Which Australian businesses might employ restoration specialists with this training?

Classic car restoration workshops, heritage vehicle dealers, museums, and specialist parts suppliers are examples of Australian employers and clients in this area. Hiring decisions rest with each business. A strong restoration portfolio and practical experience are typically more persuasive than a private qualification.

Can I study from Australia while keeping my current work, and can it be funded?

Yes, the programmes are fully online and taught in English, so you can study from Australia without a student visa and around your existing work. Fees are payable in instalments, and employer sponsorship is possible. Check the total hours and build a schedule you can sustain.

Virtual lab · try it before you enrol

Take the controls.

Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.

SIM · LIVE ●
Learning outcomes

What you will be able to do

01

Analyse lateral dynamics and the effect of torque distribution.

02

Compare torque vectoring architectures.

03

Estimate vehicle states through sensor fusion.

04

Design advanced yaw controllers.

05

Validate the system in simulation and hardware-in-the-loop.

06

Tune the system on track using real data.

07

Apply functional safety to system development.

Profile

Who it's for

  • Vehicle dynamics control engineers.
  • Chassis software engineers.
  • Motorsport performance engineers.
  • Simulation engineers.
  • Calibration engineers.
  • Functional safety engineers.
  • Engineering or science graduates looking to enter motorsport.
Standards & tools

What you'll work with

  • ISO 26262 (functional safety)
  • ISO 3888-1 (double lane-change manoeuvre)
  • ISO 4138 (steady-state circular driving)
  • ISO 7401 (lateral transient response)
  • ISO 8855 (vehicle dynamics and terminology)
  • FIA Formula E Technical Regulations (electric single-seater rules)
  • ISO 11898 (CAN bus)
  • MATLAB/Simulink
  • IPG CarMaker
  • VI-CarRealTime
  • dSPACE SCALEXIO
  • MoTeC i2
Syllabus

8 modules

  1. 1.1Bicycle model and understeer gradient
  2. 1.2Yaw moment and how it is generated
  3. 1.3Tyre friction ellipse
  4. 1.4Longitudinal and lateral load transfer
  5. 1.5Influence of torque split on balance
  6. 1.6Open, limited-slip and active differentials
  7. 1.7Brake-based versus motor-based vectoring
  8. 1.8Physical limits of torque vectoring
  9. 1.9Cornering performance metrics
  10. 1.10Lab: bicycle model in MATLAB
  1. 2.1Active differentials with multi-plate clutches
  2. 2.2Rear axles with two electric motors
  3. 2.3Four in-wheel motor configurations
  4. 2.4Vectoring in all-wheel-drive vehicles
  5. 2.5Hydraulic and electromechanical actuators
  6. 2.6Dynamic response and actuator bandwidth
  7. 2.7Integration with brakes and ABS
  8. 2.8Mechanical losses and energy efficiency
  9. 2.9Applicable motorsport technical regulations
  10. 2.10Case study: comparing architectures in electric prototypes
  1. 3.1Estimating lateral velocity and sideslip angle
  2. 3.2Kalman and extended Kalman filters
  3. 3.3Estimating available grip
  4. 3.4High-frequency inertial sensors and GPS
  5. 3.5Real-time sensor fusion
  6. 3.6Estimating tyre forces
  7. 3.7Robustness against sensor noise and bias
  8. 3.8Validating estimators with track data
  9. 3.9Implementation on on-board control units
  10. 3.10Practical: sideslip estimator with a Kalman filter
  1. 4.1Yaw control by reference yaw rate
  2. 4.2Sliding mode control
  3. 4.3Model predictive control (MPC)
  4. 4.4Optimal torque allocation between wheels
  5. 4.5Combining feedforward and feedback control
  6. 4.6Coordination with traction control
  7. 4.7Managing actuator saturation
  8. 4.8Robustness and stability analysis
  9. 4.9Gain tuning by circuit type
  10. 4.10Lab: yaw control in Simulink
  1. 5.1High-fidelity vehicle models
  2. 5.2Pacejka tyre models
  3. 5.3Standardised dynamic test manoeuvres
  4. 5.4Driver-in-the-loop simulators
  5. 5.5Model-in-the-loop and software-in-the-loop validation
  6. 5.6Hardware-in-the-loop testing of the control unit
  7. 5.7Parameter sensitivity analysis
  8. 5.8Correlation with logged track data
  9. 5.9Optimising controller parameters
  10. 5.10Practical: simulated double lane-change manoeuvre
  1. 6.1Instrumenting the test vehicle
  2. 6.2Closed-circuit test protocols
  3. 6.3Tuning torque maps by corner
  4. 6.4Interpreting driver feedback
  5. 6.5Data analysis by lap and sector
  6. 6.6Thermal management of motors and brakes
  7. 6.7System behaviour in the wet
  8. 6.8Specific qualifying and race maps
  9. 6.9System reliability in races
  10. 6.10Case study: tuning vectoring on a technical circuit
  1. 7.1Hazard analysis of torque vectoring
  2. 7.2Failure modes and degradation strategies
  3. 7.3Safety requirements according to ISO 26262
  4. 7.4Signal plausibility monitoring
  5. 7.5AUTOSAR-based software architecture
  6. 7.6Verification and testing of control software
  7. 7.7Calibration version management
  8. 7.8On-board diagnostics and event logging
  9. 7.9Technical documentation of the system
  10. 7.10Workshop: HARA of a torque vectoring system
  1. 8.1Defining the vehicle and category
  2. 8.2Building the dynamic model
  3. 8.3Designing the state estimator
  4. 8.4Designing and tuning the controller
  5. 8.5Simulation and virtual validation
  6. 8.6Track test plan
  7. 8.7Functional safety analysis
  8. 8.8Writing the technical report
  9. 8.9Report and presentation
  10. 8.10Final project: final review with the tutor
Methodology, software & labs

How you'll learn

A 100% online programme on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so it fits around your job.

Each module combines theory, guided reading of the original standard and applied exercises. The working software is MATLAB/Simulink, IPG CarMaker, VI-CarRealTime, dSPACE SCALEXIO and MoTeC i2, in free, academic or evaluation versions. Testing is studied through real procedures: standardised manoeuvres in a simulator, hardware-in-the-loop testing of the control unit, and torque map tuning on circuit. Assessment is continuous by module, plus the final project.

Standards covered: ISO 26262, ISO 3888-1, ISO 4138, ISO 7401, ISO 8855, FIA Formula E Technical Regulations, ISO 11898.

Assigned technical tutor:every module ends with a deliverable that your tutor marks individually.
Standards-based learning:guided reading of ISO 26262, ISO 3888-1 and ISO 4138 applied to real cases, not as a theoretical annex.
Industry software:MATLAB/Simulink, IPG CarMaker, VI-CarRealTime, dSPACE SCALEXIO and MoTeC i2, in free, academic or evaluation versions.
Final project:A complete torque vectoring system for a competition vehicle, from dynamic model to track test plan and safety analysis, reviewed by your tutor.
Flexible format:100% online, no fixed timetables, compatible with full-time work.
Capstone project

Build it end to end

Your final project follows the real engineering workflow, step by step, reviewed by your tutor.

Bicycle model
Model lateral dynamics and the effect of torque split in MATLAB.
Sideslip estimator
Build a Kalman-filter estimator and validate it with track data.
Yaw controller
Design and tune a yaw controller with optimal torque allocation in Simulink.
Virtual validation
Validate the controller in a simulated double lane-change and HIL tests.
Final project
A complete torque vectoring system with test plan and HARA, reviewed by your tutor.
Career opportunities

Where this takes you

Vehicle dynamics control engineerChassis software engineerMotorsport performance engineerSimulation engineerCalibration engineerFunctional safety engineer
Admissions & scholarships

Requirements

  • Prior technical training or professional experience in the sector. No university degree is required.
  • An internet connection and a computer capable of running the programme software.
  • English sufficient to read technical standards.

Ready to start?

Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.

Apply now Scholarships
FAQ

Frequently asked questions

The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.

You work with MATLAB/Simulink, IPG CarMaker, VI-CarRealTime, dSPACE SCALEXIO and MoTeC i2, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.

A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.

Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.

Prior technical training or professional experience in the sector; no university degree is required.

Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.

Keep exploring

Related programmes

See all in Restoration & Classics
Postgraduate DiplomaA$2,850

Diploma in Brake Boosters, Master Cylinders and Friction Materials

Online postgraduate diploma of 800 hours in brake boosters, master cylinders and friction materials: 8 modules covering brake hydraulics, master cylinders, brake boosters, friction materials, discs,…

6–8 monthsOnlineRestoration & Classics
Postgraduate DiplomaA$2,050

Postgraduate Diploma in DfAM and Tooling/Pattern Prototyping

800-hour online Postgraduate Diploma in DfAM and Tooling/Pattern Prototyping. 8 modules covering ISO/ASTM 52910 (design guidelines for additive manufacturing), ISO/ASTM 52900 (additive manufacturing: terminology) and nTop.…

800 hOnlineRestoration & Classics
Postgraduate DiplomaA$1,420

Postgraduate Diploma in SLS/SLM for Metals: Parameters and Post-Processing

Online 800-hour Postgraduate Diploma in SLS/SLM for Metals: Parameters and Post-Processing. 8 modules covering ISO/ASTM 52900 (additive manufacturing, terminology), ISO/ASTM 52904 (metal PBF for critical applications)…

800 hOnlineRestoration & Classics
Diploma in Advanced Torque Vectoring in MotorsportEnrol
Related programmes

More in Restoration & Classics

Diploma in Heavy Axle Reliability and MaintenanceView programme →Diploma in Pit Operations and Driver SafetyView programme →Diploma in Safety Plans, Evacuation and InsuranceView programme →Diploma in Geometry, Alignment and Stability in Classic VehiclesView programme →Postgraduate Diploma in High-Load Cooling and Thermal ManagementView programme →Postgraduate Diploma in Fluid Management and Environmental ContainmentView programme →

All Restoration & Classics programmes → · How to apply · Fees & financing · Scholarships

Scroll to Top
SEIUM – Institute of Advanced Engineering
Powered by  GDPR Cookie Compliance
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.