Diploma in Segmentation, Bundles and Subscriptions
Online postgraduate diploma of 800 hours in segmentation, bundles and subscriptions. 8 modules covering fundamentals, the regulatory framework (Regulation (EU) 2017/745 (MDR), ISO 13485), analysis methods with OpenSim, design and sizing, systems integration, risk management, validation and an integrative case study, with an assigned technical tutor.
Diploma in Segmentation, Bundles and Subscriptions — studying from South Africa
South Africa has one of the more developed insurance and financial services sectors on the continent, with major insurers and reinsurers headquartered in Johannesburg and Cape Town. Actuarial and risk analysis skills are in demand for pricing, reserving and risk management. The Financial Sector Conduct Authority and the Prudential Authority regulate the sector, and insurers rely on data-driven models to meet capital and solvency requirements. Engineers with statistics and data skills are increasingly recruited into these roles.
Fees for South Africa: R 20 400 (South African rand), with instalments and employer sponsorship available.
Relevant bodies in South Africa
Typical roles
Questions from South Africa
Will a SEIUM qualification be recognised by the professional bodies in South Africa for this area?
SEIUM qualifications are private qualifications, not official state degrees, and they are not accredited by any South African body. Actuarial work in South Africa is overseen by the Actuarial Society of South Africa (ASSA), whose professional credentials follow their own examination and regulatory routes. Recognition of a SEIUM qualification is decided by employers or the relevant body, so verify this directly with them before enrolling.
How might this qualification be used by employers in South Africa in insurance and risk roles?
Insurers, banks and risk consultancies look for strong data, modelling and risk skills. A private qualification may support your profile, particularly alongside relevant experience, but it will not replace formal professional credentials where these are required. Whether a particular employer values it is up to them, so it is worth asking hiring managers in your target field how they would view it.
Can I study this programme alongside full-time work from South Africa, and is there a time zone or language issue?
Yes, the programme is delivered fully online and in English, so no student visa is needed to study from home. Master's programmes require 1,900 hours, postgraduate diplomas 800 hours and specialist courses 300 hours. Each student is assigned a technical tutor, fees can be paid in instalments, and employer sponsorship is possible. Ask SEIUM about the time-zone and weekly workload expectations before committing.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Master the technical fundamentals of segmentation, bundles and subscriptions and the associated regulatory vocabulary.
Apply Regulation (EU) 2017/745 (MDR), ISO 13485 and IEC 62304 to real design and validation decisions.
Build and correlate calculation models with OpenSim and AnyBody Modeling System.
Plan and run test campaigns in a motion analysis laboratory and on an implant test bench.
Analyse operating data and translate it into engineering decisions.
Prepare the technical and compliance dossier required by the client or the regulator.
Lead a segmentation, bundles and subscriptions project technically from start to finish.
Who it's for
- Biomedical engineers looking to specialise in segmentation, bundles and subscriptions.
- Biomechanics specialists who want to add segmentation, bundles and subscriptions to their skill set.
- Healthcare regulatory affairs managers who need a solid technical grounding in segmentation, bundles and subscriptions.
- Medical software engineers moving into segmentation, bundles and subscriptions projects.
- Clinical trials technicians who want to broaden their technical profile.
- Orthotics and prosthetics designers seeking to lead segmentation, bundles and subscriptions work in their organisation.
- Engineering or science graduates looking to enter the medical devices sector.
What you'll work with
- Regulation (EU) 2017/745 (MDR) (EU Medical Device Regulation)
- ISO 13485 (quality management for medical devices)
- IEC 62304 (medical device software life cycle)
- ISO 14971 (risk management for medical devices)
- IEC 60601 (safety of medical electrical equipment)
- ISO 10993 (biological evaluation and biocompatibility)
- ISO 14155 (clinical investigation of medical devices)
- Regulation (EU) 2016/679 (GDPR, personal data protection)
- UNE-EN ISO 22442 (medical devices utilising animal tissues)
- OpenSim
- AnyBody Modeling System
- Mimics
- 3-matic
- ANSYS Mechanical
8 modules
1.1Core concepts and quantities of Segmentation, Bundles and Subscriptions1.2Technology landscape and state of the art1.3Technical terminology and reference documentation1.4Physical and engineering principles applied to the case1.5Functional architecture: from requirements to components1.6Interfaces and dependencies with adjacent systems1.7Typical use cases in the sector1.8Common errors and how to detect them early1.9Data sources and quality criteria1.10Guided exercise: initial diagnosis
2.1Applicable regulatory framework: overview2.2Regulatory hierarchy and conflicts between standards2.3Mandatory requirements versus good practice2.4Acceptance criteria and required evidence2.5Technical documentation and traceability2.6Change management and configuration control2.7Audits, inspections and non-conformities2.8Responsibilities and division of scope2.9Interpretation of critical clauses2.10Exercise: regulatory checklist
3.1Setting up the model: assumptions and simplifications3.2Selection of tools and working environment3.3Preparation of input data3.4Workflow and good modelling practice3.5Discretisation and case preparation3.6Boundary conditions and load cases3.7Convergence control and numerical verification3.8Sensitivity analysis and parametric study3.9Automation and model reuse3.10Exercise: building a base model
4.1Design requirements and starting criteria4.2Solution alternatives and comparative analysis4.3Sizing and safety margins4.4Selection of materials, equipment or components4.5Integration with the rest of the system4.6Cost, schedule and manufacturing constraints4.7Reliability, maintainability and service life4.8Sustainability and efficiency in design4.9Design review and risk management4.10Exercise: documented design proposal
5.1System architecture and functional breakdown5.2Interface definition and control5.3Protocols and data exchange5.4Progressive integration and interface testing5.5Electromagnetic and environmental compatibility5.6Configuration management of the whole system5.7Resolving conflicts between subsystems5.8Commissioning the integrated system5.9Traceability from requirements to verification5.10Exercise: interface matrix
6.1Hazard identification and preliminary analysis6.2Failure modes and effects analysis6.3Fault trees and quantitative analysis6.4Allocation of reliability targets6.5Barriers, redundancy and fault tolerance6.6Human factors and operating errors6.7Safety evidence and argumentation6.8Risk management throughout the life cycle6.9Indicators and monitoring in operation6.10Exercise: risk analysis of a case
7.1Verification and validation strategy7.2Test plan: scope and coverage7.3Instrumentation and data acquisition7.4Laboratory testing versus field testing7.5Correlation between model and measurement7.6Treatment of uncertainty and tolerances7.7Failure analysis and corrective actions7.8Commissioning and acceptance criteria7.9Documentation of the validation file7.10Exercise: validation report
8.1Definition of the case and success criteria8.2Collection of input data and requirements8.3Work planning and deliverables8.4Technical development guided by the tutor8.5Application of the regulatory framework to the case8.6Verification of results and critical analysis8.7Documentation of the deliverable8.8Technical defence and peer review8.9Lessons learned and continuous improvement8.10Final project: final assessment and programme close-out
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so it is compatible with full-time work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is OpenSim, AnyBody Modeling System, Mimics, 3-matic, ANSYS Mechanical, in free, academic or evaluation versions. Testing is studied on real procedures from a motion analysis laboratory, an implant test bench and a biocompatibility chamber. Assessment is continuous by module plus the final integrative project.
Standards covered: Regulation (EU) 2017/745 (MDR), ISO 13485, IEC 62304, ISO 14971, IEC 60601, ISO 10993, ISO 14155, Regulation (EU) 2016/679, UNE-EN ISO 22442.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with OpenSim, AnyBody Modeling System, Mimics, 3-matic, ANSYS Mechanical, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree is required), a computer able to run the programme software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Postgraduate Diploma in Elasticity and Customer Segmentation in Insurance
Online 800-hour postgraduate diploma in elasticity and Customer Segmentation in Insurance. 8 modules covering Delegated Regulation (EU) 2017/2358 (product governance), Directive (EU) 2016/97 (IDD, customer demands…
Diploma in Parametric Insurance Implementation in LATAM
Online postgraduate diploma of 800 hours in parametric insurance implementation in LATAM. 8 modules covering parametric insurance implementation in LATAM from fundamentals to validation and implementation,…
Postgraduate Diploma in Retention Strategies and Dynamic Pricing in Automotive
Online 800-hour Postgraduate Diploma in Retention Strategies and Dynamic Pricing in Automotive. 8 modules covering the EIOPA Supervisory Statement on differential pricing practices (2023), FCA PS21/5…
More in Insurance, Risk & Actuarial Data
All Insurance, Risk & Actuarial Data programmes → · How to apply · Fees & financing · Scholarships