CourseRegulation, Safety, RAMS & Homologation Applications open

Course in Greenwashing and Ethics in Sustainability Regulations

Online 300 h course in greenwashing and ethics in sustainability regulations. 6 modules covering Directive (EU) 2024/825 (Empowering Consumers for the Green Transition), Directive 2005/29/EC (unfair commercial practices) and SimaPro. Assigned tutor and open enrolment.

Duration300 h
ModeOnline
Start datesSet by the faculty
AwardSEIUM Institute certificate

Course in Greenwashing and Ethics in Sustainability Regulations — studying from South Africa

Regulation, safety and homologation skills are essential across South African industry, from road vehicles and aviation to energy and mining. Engineers must demonstrate compliance with national standards set by the South African Bureau of Standards and sector regulators. Reliability, availability, maintainability and safety analysis is applied in infrastructure, rail, energy and manufacturing projects. Specialists support certification, type approval and risk assessment for both local and export markets.

Fees for South Africa: R 8 340 (South African rand), with instalments and employer sponsorship available.

Relevant bodies in South Africa

  • South African Bureau of Standards (SABS)
  • Engineering Council of South Africa (ECSA)
  • National Regulator for Compulsory Specifications (NRCS)

Typical roles

  • Homologation Engineer
  • Safety Engineer
  • RAMS Engineer
  • Compliance Engineer

Questions from South Africa

Will a SEIUM qualification be recognised by the professional bodies in South Africa for this area?

SEIUM qualifications are private, not official state degrees, and are not accredited by any South African body. Homologation and standards work in South Africa involves the SABS and the National Regulator for Compulsory Specifications (NRCS), while ECSA handles engineering registration. Whether a SEIUM qualification is recognised is for employers or these bodies to decide, so check beforehand.

How might this qualification be used by employers in South Africa in regulation, safety and RAMS roles?

Employers in automotive, rail, energy and industrial sectors value RAMS and compliance expertise, often tied to recognised certifications and experience. A private qualification may strengthen your profile but will not replace formal requirements. Its value depends on each employer's preference, so ask hiring managers how they would assess it.

Can I study this programme alongside full-time work from South Africa, and is there a time zone or language issue?

Yes, the programme is delivered fully online in English, so you can study from South Africa without a student visa. Master's programmes require 1,900 hours, postgraduate diplomas 800 hours and specialist courses 300 hours, with an assigned technical tutor. Fees can be paid in instalments and employer sponsorship is possible. Confirm time-zone and weekly workload expectations with SEIUM before enrolling.

Virtual lab · try it before you enrol

Take the controls.

Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.

SIM · LIVE ●
Learning outcomes

What you will be able to do

01

Identify the most common greenwashing practices in corporate communication.

02

Interpret the obligations of Directive (EU) 2024/825 on environmental claims.

03

Assess the robustness of the technical evidence supporting an environmental claim.

04

Apply ISO 14021 and ISO 14067 to the verification of environmental declarations.

05

Relate the European taxonomy and the CSRD to the consistency of sustainability reporting.

06

Design governance and ethical control mechanisms for environmental communication.

07

Develop an anti-greenwashing programme for a real organisation.

Profile

Who it's for

  • Corporate sustainability consultant who wishes to specialise in Greenwashing and Ethics in Sustainability Regulations.
  • ESG compliance manager who wishes to specialise in Greenwashing and Ethics in Sustainability Regulations.
  • Sustainability report auditor who wishes to specialise in Greenwashing and Ethics in Sustainability Regulations.
  • Environmental communication specialist who wishes to specialise in Greenwashing and Ethics in Sustainability Regulations.
  • European taxonomy analyst who wishes to specialise in Greenwashing and Ethics in Sustainability Regulations.
  • Corporate ethics and governance adviser who wishes to specialise in Greenwashing and Ethics in Sustainability Regulations.
  • Engineering or science graduates seeking to enter sustainability consulting.
Standards & tools

What you'll work with

  • Directive (EU) 2024/825 (Empowering Consumers for the Green Transition)
  • Directive 2005/29/EC (unfair commercial practices)
  • Regulation (EU) 2020/852 (taxonomy of sustainable activities)
  • Regulation (EU) 2019/2088 (SFDR)
  • Directive (EU) 2022/2464 (CSRD)
  • ISO 14021 (self-declared environmental claims)
  • ISO 14024 (Type I ecolabelling)
  • ISO 14067 (carbon footprint of products)
Syllabus

6 modules · 300 h

  1. 1.1Types of environmental claims for products and companies
  2. 1.2From green marketing to greenwashing
  3. 1.3Taxonomy of misleading practices: the seven sins
  4. 1.4Generic claims: eco-friendly, green, neutral
  5. 1.5Carbon offsetting and climate neutrality
  6. 1.6ISO Type I, II and III labels
  7. 1.7Self-declarations under ISO 14021
  8. 1.8Impact on consumers and investors
  9. 1.9Greenhushing and reputational risk
  10. 1.10Case study: analysis of a manufacturer's claims
  1. 2.1Directive 2005/29/EC on unfair commercial practices
  2. 2.2Directive (EU) 2024/825 on empowering the consumer
  3. 2.3Proposal for a Directive on green claims
  4. 2.4Taxonomy Regulation (EU) 2020/852
  5. 2.5CSRD and ESRS reporting standards
  6. 2.6SFDR and classification of Article 8 and 9 funds
  7. 2.7Ecodesign Regulation and digital product passport
  8. 2.8EU Ecolabel
  9. 2.9Guidance from consumer and competition authorities
  10. 2.10Workshop: regulatory map of a green claim
  1. 3.1Life cycle assessment according to ISO 14040/14044
  2. 3.2Product Environmental Footprint (PEF)
  3. 3.3Environmental Product Declarations (EN 15804)
  4. 3.4ISO 14067 carbon footprint and the GHG Protocol
  5. 3.5Scope 1, 2 and 3 emissions
  6. 3.6Verifiable recycled content and recyclability
  7. 3.7Carbon credits: quality and permanence
  8. 3.8Science-based targets (SBTi)
  9. 3.9Third-party verification and accreditation
  10. 3.10Laboratory: auditing a carbon footprint
  1. 4.1Ethical theories applied to corporate communication
  2. 4.2Conflicts of interest in certification
  3. 4.3The engineer's responsibility for environmental data
  4. 4.4Double materiality and due diligence
  5. 4.5Sustainability committees and internal control
  6. 4.6Whistleblowing channels and whistleblower protection
  7. 4.7Professional codes of ethics
  8. 4.8Transparency versus trade secrecy
  9. 4.9Risks of bias in ESG metrics
  10. 4.10Case study: an ethical dilemma in a sustainability report
  1. 5.1Climate litigation and relevant cases
  2. 5.2Penalties imposed by consumer authorities
  3. 5.3Decisions of advertising self-regulatory bodies
  4. 5.4ESMA and CNMV supervision of sustainable finance
  5. 5.5Directors' liability
  6. 5.6Public rectification and corrective measures
  7. 5.7Supplier due diligence (CSDDD)
  8. 5.8Prevention: prior review of campaigns
  9. 5.9Early warning indicators of greenwashing
  10. 5.10Practical exercise: opinion on an advertising campaign
  1. 6.1Selection of company or product
  2. 6.2Inventory of environmental claims
  3. 6.3Applicable regulatory analysis
  4. 6.4Review of technical evidence
  5. 6.5Detection of risks and gaps
  6. 6.6Proposal of corrected claims
  7. 6.7Internal validation procedure
  8. 6.8Responsible communication plan
  9. 6.9Report and presentation
  10. 6.10Final review with the tutor
Methodology, software & labs

How you'll learn

Fully 100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetable: students progress at their own pace within the intake, which makes it possible to combine the course with work.

Each module combines theory, guided reading of the original standard and applied exercises. The working software is SimaPro, openLCA, advanced Excel, Power BI, in free, academic or evaluation versions. Tests are studied using real procedures for auditing environmental claims, reviewing sustainability reports, and analysing litigation and penalty cases. Assessment is continuous by module plus the final integrating project.

Accreditable laboratories(EN ISO/IEC 17025) with rotor test rig, EMC/Lightning pre-compliance, HIL/SIL, vibration/acoustics.
Evidence-oriented master's thesis:safety case, test plan, compliance dossier and operational limits.
Industry mentoring:faculty with a track record in training, , eVTOL/UAM and flight test.
Flexible format(hybrid/online), international cohorts and support from SEIUM Career Services.
Ethics and safety:safety-by-design approach, cyber-OT, DIH and compliance as core pillars.
Capstone project

Build it end to end

Your final project follows the real engineering workflow, step by step, reviewed by your tutor.

Selection of company or product

Identify the most common greenwashing practices in corporate communication.

Inventory of environmental claims

Interpret the obligations of Directive (EU) 2024/825 on environmental claims.

Applicable regulatory analysis

Assess the robustness of the technical evidence supporting an environmental claim.

Review of technical evidence

Apply ISO 14021 and ISO 14067 to the verification of environmental declarations.

Detection of risks and gaps

Relate the European taxonomy and the CSRD to the consistency of sustainability reporting.

Career opportunities

Where this takes you

Corporate sustainability consultantESG compliance managerSustainability report auditorEnvironmental communication specialistEuropean taxonomy analystCorporate ethics and governance adviser
Admissions & scholarships

Requirements

  • No prior degree is required.
  • Internet connection and a computer capable of running the programme's software.
  • Sufficient command of Spanish to follow technical regulatory texts.

Ready to start?

Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.

FAQ

Frequently asked questions

The programme comprises 300 hours in total, spread over 3 to 5 months. This amounts to an average of 10 to 15 hours per week, compatible with a full-time job.

You will work with SimaPro, openLCA, advanced Excel and Power BI. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.

A SEIUM own diploma upon passing the continuous assessment and the integrating project. This is in-house training, not an official Ministry qualification.

Yes. Modules passed in a course or Postgraduate Diploma in the same area are credited towards the advanced programme. Please check the credit transfer policy when you enrol.

Course in Greenwashing and Ethics in Sustainability RegulationsEnrol
Scroll to Top
SEIUM – Institute of Advanced Engineering
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.