Tiltrotor dynamics course
Online course of 300 hours in tiltrotor dynamics. 6 modules covering tiltrotor configuration and missions, tilting rotor aerodynamics, dynamics and stability in conversion, rotor-wing aeroelasticity, and flight control systems, with an assigned technical tutor.
Tiltrotor dynamics course — studying from the United States
The United States leads global aerospace, anchored by clusters in Seattle, Wichita, Hartford, Huntsville and the Houston area. Major employers such as Boeing, Lockheed Martin, RTX and GE Aerospace drive demand for engineers in airframes, propulsion, avionics and systems integration. Urban air mobility and commercial drone operations are expanding quickly, creating new roles in eVTOL design, airspace integration and UAS operations. Civil and military programs both rely heavily on certified design, testing and airworthiness processes, making this a strong field for engineers seeking complex, high-impact work.
Fees for the United States: 890 US$ (US Dollars), with instalments and employer sponsorship available.
Relevant bodies in the United States
Typical roles
Questions from the United States
Do I get a tutor?
Yes. Every learner is assigned a dedicated technical tutor who supports progress throughout the programme and the final project.
Are fees shown in US Dollars?
Yes. All fees on this site are shown in US Dollars, and instalment options are available for many programmes.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Describe the configuration and missions of tiltrotors.
Analyse the aerodynamics of tilting rotors.
Build the conversion corridor of the aircraft.
Assess stability during transition.
Understand the whirl flutter phenomenon.
Analyse control laws in different flight modes.
Interpret the applicable certification requirements.
Who it's for
- Rotorcraft flight dynamics engineers
- Aeroelasticity engineers
- Flight control engineers
- Aeronautical simulation engineers
- Flight test engineers
- VTOL aircraft design engineers
- Engineering or science graduates looking to move into the aeronautics sector
What you'll work with
- CS-29 (EASA) (certification specifications for large rotorcraft)
- ADS-33E-PRF (handling qualities requirements for military rotorcraft)
- 14 CFR Part 21.17(b) (FAA special class type certification basis)
- EASA Special Condition SC-VTOL (certification of small VTOL aircraft)
- MIL-HDBK-1797 (flying qualities of piloted aircraft)
- SAE ARP4754B (guidelines for development of civil aircraft and systems)
- CAMRAD II
- FLIGHTLAB
- MATLAB/Simulink
- X-Plane
- Dymore
6 modules
1.1Historical evolution of tilting-rotor aircraft1.2Tiltrotor and tiltwing configurations1.3Advantages over helicopters and aeroplanes1.4Civil and search-and-rescue missions1.5Tilting nacelles and cross-shafting1.6Highly twisted proprotors1.7Trade-off between hover and cruise1.8Powered-lift category aircraft1.9Current programmes and derived eVTOLs1.10Case study: performance comparison with an equivalent helicopter
2.1Rotor in hover and in axial cruise2.2Rotor-wing interaction in vertical flight2.3Download on the wing2.4Conversion corridor and speed limits2.5Nacelle aerodynamics during conversion2.6Wing stall during transition2.7Ground effect in helicopter mode2.8Vortex ring state in tiltrotors2.9Noise during conversion and approach2.10Practical exercise: building the conversion corridor
3.1Equations of motion with moving nacelles3.2Variation of derivatives with nacelle angle3.3Stability in hover3.4Stability in aeroplane mode3.5Inter-axis coupling3.6Dynamic modes during transition3.7Gust response during conversion3.8Handling qualities of rotorcraft3.9Simulation of the conversion manoeuvre3.10Lab: stability analysis as a function of nacelle angle
4.1Whirl flutter instability4.2Wing and nacelle stiffness4.3Coupled rotor-wing-nacelle modes4.4Gimbals and constant-velocity hubs4.5Required structural damping4.6Dynamic loads in the drive train4.7Vibrations transmitted to the cabin4.8Aeroelastic stability analysis4.9Wind tunnel testing of semi-span models4.10Workshop: simplified whirl flutter model
5.1Control in helicopter mode and in aeroplane mode5.2Control mixing as a function of nacelle angle5.3Differential pitch and yaw control5.4Fly-by-wire control laws5.5Conversion envelope protection5.6Engine failures and cross-shafting5.7Autorotation and emergency landing5.8Certification of powered-lift aircraft5.9Pilot training and licensing5.10Case study: managing an engine failure during conversion
6.1Definition of the study aircraft6.2Aerodynamic model of rotor and wing6.3Conversion corridor6.4Dynamic model and trim6.5Stability analysis6.6Whirl flutter analysis6.7Proposed control laws6.8Conclusions of the study6.9Report and presentation6.10Final project: final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within the intake, so you can combine the programme with your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is CAMRAD II, FLIGHTLAB, MATLAB/Simulink, X-Plane and Dymore, in free, academic or evaluation versions. Testing is studied through real procedures: simulation of the conversion manoeuvre, aeroelastic stability analysis and handling qualities assessment. Assessment is continuous by module, plus the final capstone project.
Standards covered: CS-29 (EASA), ADS-33E-PRF, 14 CFR Part 21.17(b), EASA Special Condition SC-VTOL, MIL-HDBK-1797, SAE ARP4754B
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- No prior qualification is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 300 hours over 3 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with CAMRAD II, FLIGHTLAB, MATLAB/Simulink, X-Plane and Dymore, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute certificate, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
No prior qualification is required: you need an internet connection, a computer able to run the programme software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Vertiport safety course
Online course of 300 hours in vertiport safety and security: 6 modules covering vertiport risks, operational safety, physical and passenger security, fire protection, and cybersecurity and…
Ethics course on the use of drones
Online course of 300 hours in ethics in the use of drones, structured in 6 modules covering applied ethics, privacy and data protection, public use and…
Course on supersonic aerothermodynamics
Online course of 300 hours in supersonic aerothermodynamics. 6 modules covering supersonic waves, aerofoil and wing aerodynamics, heating and boundary layers, intakes and nozzles and supersonic…
More in Aerospace, UAM, Drones & Space
All Aerospace, UAM, Drones & Space programmes → · How to apply · Fees & financing · Scholarships