Postgraduate Diploma in Safe Handling of Ammonia/Methanol
Online 800-hour Postgraduate Diploma in Safe Handling of Ammonia/Methanol. 8 modules covering Directive 2012/18/EU (Seveso III), Royal Decree 656/2017 (storage of chemical products, APQ) and PHAST (DNV). Assigned tutor and open enrolment.
Postgraduate Diploma in Safe Handling of Ammonia/Methanol — studying from the United States
The United States operates one of the world's largest energy systems, spanning power generation, transmission, distribution and renewable resources. Utilities, grid operators and technology companies are investing in grid modernization, storage and distributed energy resources. Regional clusters in Texas, California, the Midwest and the Pacific Northwest support engineers working on transmission planning, substations and energy markets. Reliability and cybersecurity standards make grid expertise especially valuable.
Fees for the United States: US$1,000 (US Dollars), with instalments and employer sponsorship available.
Relevant bodies in the United States
Typical roles
Questions from the United States
Which US bodies and regulators govern energy and power network engineering?
In the US, the Federal Energy Regulatory Commission regulates wholesale electricity and interstate transmission, while state public utility commissions oversee distribution. The IEEE Power & Energy Society is a key professional body, and Professional Engineer licensure from state boards is common for utility engineering. SEIUM's private qualifications are not official degrees, so employers and licensing boards decide any recognition.
Do US utilities and energy employers recognize private online engineering qualifications?
US utilities, grid operators and energy firms usually require accredited engineering degrees, PE licensure for certain roles, and relevant operational experience. A private online qualification can add specialist knowledge, but it is not a standard substitute for these requirements. Its value depends on the employer's policies and on your practical background.
Can I realistically study energy and networks from the US while working full time?
Yes, the programmes are fully online, taught in English, and do not require a student visa. The time commitment is about 1,900 hours for a master's, 800 hours for a postgraduate diploma, or 300 hours for a specialist course, so plan carefully. Each student has an assigned technical tutor. Fees can be paid in instalments, and some employers sponsor professional development, so check with yours.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Identify the properties and hazards of ammonia and methanol.
Apply the regulatory framework for storage and major accidents.
Design safe storage facilities for ammonia and methanol.
Define safe transfer and handling procedures.
Carry out risk analyses using HAZOP and consequence methodologies.
Select detection and protection systems.
Prepare emergency and self-protection plans.
Who it's for
- Process safety engineer seeking to specialise in Safe Handling of Ammonia/Methanol.
- Industrial risk prevention technician seeking to specialise in Safe Handling of Ammonia/Methanol.
- APQ facilities manager seeking to specialise in Safe Handling of Ammonia/Methanol.
- Industrial risk analyst seeking to specialise in Safe Handling of Ammonia/Methanol.
- Emergency plan manager seeking to specialise in Safe Handling of Ammonia/Methanol.
- Chemical terminal engineer seeking to specialise in Safe Handling of Ammonia/Methanol.
- Graduates in engineering or science looking to enter the chemical industry.
What you'll work with
- Directive 2012/18/EU (Seveso III)
- Royal Decree 656/2017 (storage of chemical products, APQ)
- ITC MIE APQ-4 (anhydrous ammonia)
- Regulation (EC) No 1272/2008 (CLP)
- Directive 1999/92/EC (ATEX, workplaces)
- IEC 60079-10-1 (classification of hazardous areas)
- Royal Decree 840/2015 (major accidents)
8 modules · 800 h
1.1Physicochemical properties of ammonia1.2Physicochemical properties of methanol1.3Toxicity and occupational exposure limits1.4Flammability and explosive limits1.5Safety data sheets and the CLP Regulation1.6Corrosivity and material compatibility1.7Leak behaviour and dispersion1.8Ammonia and methanol as energy vectors1.9Historical accidents and lessons learned1.10Workshop: comparative analysis of safety data sheets
2.1Seveso III Directive and RD 840/20152.2Regulation on storage of chemical products (APQ)2.3ATEX Directives 2014/34/EU and 1999/92/EC2.4Pressure equipment directive2.5ADR and road transport2.6IMO IGC Code and IGF Code2.7IMO interim guidelines for ammonia fuel2.8Classification society rules for vessels2.9Occupational risk prevention regulations2.10Practice: classifying a facility under Seveso III
3.1Refrigerated versus pressurised storage3.2Double-containment and full-containment tanks3.3Materials and stress embrittlement3.4Vents and relief systems3.5Bunds and secondary containment3.6Storage of methanol and inert gases3.7Safety distances3.8Tank inspection and maintenance3.9EN 14620 and API 625 standards3.10Case study: design review of a refrigerated ammonia tank
4.1Loading and unloading operations4.2Loading arms and hoses4.3Emergency disconnect couplings4.4Ammonia and methanol bunkering4.5Purging, inerting and commissioning4.6Safe operating procedures4.7Work permits4.8Personal protective equipment4.9Operator training4.10Practice: methanol transfer procedure from a tanker
5.1HAZID hazard identification5.2HAZOP studies of facilities5.3Consequence modelling with PHAST and ALOHA5.4Toxic cloud dispersion5.5Methanol pool fires5.6Quantitative risk analysis (QRA)5.7LOPA and SIL levels5.8Risk acceptability criteria5.9Land-use planning5.10Laboratory: modelling dispersion of an ammonia leak with ALOHA
6.1Ammonia detection: technologies and location6.2Methanol vapour detection and invisible flames6.3Safety instrumented systems6.4Water curtains for ammonia absorption6.5Ventilation and extraction6.6Methanol fire protection6.7ATEX zone classification6.8Emergency shutdown systems6.9Periodic testing of safety systems6.10Case study: gas detection map for a terminal
7.1Self-protection plan7.2Internal emergency plan7.3Coordination with external emergency plans7.4Response to toxic leaks7.5First aid for exposure7.6Drills and exercises7.7Incident investigation7.8Process safety management system7.9Safety culture and indicators7.10Workshop: designing an ammonia leak drill
8.1Description of the facility and substances8.2Analysis of the applicable regulatory framework8.3Design of storage and transfer8.4Risk identification and analysis8.5Design of detection and protection systems8.6Emergency plan8.7Safety management system8.8Conclusions and recommendations8.9Report and presentation8.10Final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: students progress at their own pace within the intake, which makes it easy to combine with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is PHAST (DNV), ALOHA, Aspen HYSYS, advanced Excel, in free, academic or evaluation versions. Tests are based on real procedures from HAZOP studies, leak dispersion modelling and emergency drills. Assessment is continuous by module, plus a final integrating project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Identify the properties and hazards of ammonia and methanol.
Apply the regulatory framework for storage and major accidents.
Design safe storage facilities for ammonia and methanol.
Define safe transfer and handling procedures.
Carry out risk analyses using HAZOP and consequence methodologies.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. A university degree is not required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient level of Spanish to follow technical regulatory texts.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme comprises 800 hours in total over 6 to 8 months. That is between 10 and 15 hours per week on average, compatible with full-time employment.
The programme uses PHAST (DNV), ALOHA, Aspen HYSYS and advanced Excel. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
A SEIUM diploma upon passing the continuous assessment and the integrating project. This is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or postgraduate diploma in the same area can be credited towards the advanced programme. Please check the credit transfer policy when you enrol.
Related programmes
Postgraduate Diploma in Secure Architectures and OT SOC
Online 800 h Postgraduate Diploma in Secure Architectures and OT SOC. 8 modules covering IEC 62443-3-3 (system security requirements for IACS), IEC 62443-2-1 (asset owner security…
Postgraduate Diploma in Demand and Generation Forecasting
Online 800-hour Postgraduate Diploma in Demand and Generation Forecasting. 8 modules covering Regulation (EU) 2017/1485 (system operation), Regulation (EU) 2017/2195 (electricity balancing) and Python (scikit-learn, statsmodels).…
Postgraduate Diploma in Energy Analytics and HVAC Optimisation
Online postgraduate diploma of 800 hours in energy analytics and HVAC optimisation, with 8 modules covering building energy data, HVAC thermodynamics, baseline models and M&V, fault…
More in Energy and Networks
All Energy and Networks programmes → · How to apply · Fees & financing · Scholarships