Postgraduate Diploma in NMEA 2000, IP67/69K and Corrosion
Online Postgraduate Diploma of 800 hours in NMEA 2000, IP67/69K and Corrosion. 8 modules covering IEC 61162-3 (NMEA 2000), IEC 60529:1989+A2:2013 and Actisense NMEA Reader. Assigned tutor and open enrolment.
Postgraduate Diploma in NMEA 2000, IP67/69K and Corrosion — studying from the United States
Electronics and telecommunications are foundational to the American economy, with research and manufacturing hubs in California, Texas, Arizona, New York and Oregon. Semiconductor investments and wireless network deployment are driving demand for hardware, firmware and systems engineers. Embedded systems now appear across automotive, medical, industrial and consumer products, requiring expertise in real-time software and secure design. Regulatory compliance with federal spectrum and safety rules is a key part of professional practice.
Fees for the United States: US$2,000 (US Dollars), with instalments and employer sponsorship available.
Relevant bodies in the United States
Typical roles
Questions from the United States
Which US bodies relate to electronics, embedded systems and telecom engineering?
The IEEE is the main professional body for electronics and telecom engineers in the US, and it publishes widely used standards. The Federal Communications Commission (FCC) regulates radio and telecom equipment. Professional Engineer licensure from state boards exists but is less common in this field. SEIUM's qualifications are private and not official degrees, so recognition rests with employers or relevant bodies.
How do US electronics and telecom employers regard private online qualifications?
US semiconductor, telecom and embedded-systems employers typically look for accredited degrees, hands-on design experience and familiarity with relevant standards. A private online qualification can document focused study, but it is not a standard requirement and its value is decided by each employer. Practical design projects and certifications often carry more weight.
Can I study embedded systems from the US around a full-time role?
Yes, the programmes are online, taught in English, and do not need a student visa. The commitment is roughly 1,900 hours for a master's, 800 hours for a postgraduate diploma, or 300 hours for a specialist course. An assigned technical tutor supports your progress. Fees can be paid in instalments, and some employers fund training, so ask whether your employer offers support.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Design compliant and reliable NMEA 2000 networks.
Interpret and decode PGN messages.
Apply the IP67, IP68 and IP69K protection ratings.
Analyse corrosion mechanisms in the marine environment.
Select protection for exposed electronics.
Plan environmental tests in accordance with IEC 60945.
Install and maintain onboard electronics using good practice.
Who it's for
- Marine electronics engineer who wants to specialise in NMEA 2000, IP67/69K and Corrosion.
- Marine systems installer who wants to specialise in NMEA 2000, IP67/69K and Corrosion.
- Environmental test engineer who wants to specialise in NMEA 2000, IP67/69K and Corrosion.
- Product design engineer who wants to specialise in NMEA 2000, IP67/69K and Corrosion.
- Corrosion specialist who wants to specialise in NMEA 2000, IP67/69K and Corrosion.
- Naval maintenance technician who wants to specialise in NMEA 2000, IP67/69K and Corrosion.
- Graduates in engineering or science looking to enter recreational boating.
What you'll work with
- IEC 61162-3 (NMEA 2000)
- IEC 60529:1989+A2:2013
- ISO 20653:2023
- IEC 60945:2002
- IEC 60068-2-52:2017
- ISO 12944-2:2017
- ISO 9227:2022
- ISO 11898-1:2015
8 modules · 800 h
1.1Electronics on boats1.2NMEA 0183 and its limitations1.3Evolution towards NMEA 20001.4CAN basis of NMEA 20001.5Backbone and drop topology1.6Terminators and network length1.7Bus power supply and LEN calculation1.8Certified devices and gateways1.9NMEA OneNet over Ethernet1.10Workshop: designing an NMEA 2000 backbone
2.1PGNs and message structure2.2Addressing and address claiming2.3Priority messages and fast packet2.4Engine, navigation and sensor data2.5Related ISO 11783 protocol2.6Decoding with CANboat2.7Bus error diagnostics2.8NMEA product certification2.9Developing an NMEA 2000 node2.10Practical: decoding PGNs with an analyser
3.1The IP system of IEC 605293.2IP67: temporary immersion3.3IP68 and manufacturer conditions3.4IP69K and ISO 206533.5Dust and water testing3.6Design of watertight enclosures3.7Gaskets, cable glands and vents3.8Watertight M12 and Deutsch connectors3.9Typical sealing failures3.10Laboratory: immersion test of an enclosure
4.1Electrochemical corrosion mechanisms4.2Galvanic corrosion and the galvanic series4.3Pitting and crevice corrosion4.4Salt spray and marine atmospheres4.5PCB and connector corrosion4.6Electrochemical migration and dendrites4.7ISO 12944 corrosivity categories4.8Stray current corrosion4.9Cathodic protection with anodes4.10Case study: corrosion failure analysis
5.1Conformal coatings and their application5.2Encapsulation and potting5.3Material selection and finishes5.4PCB design for humidity5.5Ventilation and condensation control5.6Connector treatments5.7Fasteners and metal compatibility5.8Coating quality tests5.9Repairability versus protection5.10Practical: coating selection for a sensor
6.1Salt spray test IEC 60068-2-526.2Cyclic damp heat6.3Vibration and shock on boats6.4Solar and UV radiation6.5IEC 60945 tests6.6EMC of navigation equipment6.7Combined test sequences6.8Acceptance and failure criteria6.9Test reports and certification6.10Laboratory: test plan for a marine display
7.1Good NMEA installation practices7.2Cabling in marine environments7.3Earthing and bonding7.4In-service corrosion inspection7.5Preventive maintenance of connectors7.6Field network diagnostics7.7Equipment firmware updates7.8Installation documentation7.9Classification society standards7.10Case study: audit of a sailing yacht's network
8.1Definition of the equipment and its environment8.2NMEA 2000 interface design8.3Watertight enclosure design8.4Anti-corrosion strategy for materials and finishes8.5Salt spray and ingress test plan8.6Prototype validation8.7Installation guide8.8Cost and reliability analysis8.9Report and presentation8.10Final review with the tutor
How you'll learn
100% online training on the SEIUM Institute campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetable: students progress at their own pace within the intake, allowing them to balance it with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Actisense NMEA Reader, CANboat, Maretron N2KAnalyzer, Vector CANalyzer, KiCad, in free, academic or evaluation versions. Tests are studied using real procedures for salt spray testing of electronic equipment, IP67 and IP69K ingress testing, and onboard NMEA 2000 network diagnostics. Assessment is continuous, module by module, plus a final integrating project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Design compliant and reliable NMEA 2000 networks.
Interpret and decode PGN messages.
Apply the IP67, IP68 and IP69K protection ratings.
Analyse corrosion mechanisms in the marine environment.
Select protection for exposed electronics.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient level of Spanish to follow technical standards documentation.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours, spread over 6 to 8 months. That amounts to an average of 10 to 15 hours per week, compatible with a full-time job.
The programme uses Actisense NMEA Reader, CANboat, Maretron N2KAnalyzer, Vector CANalyzer, KiCad. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
SEIUM Institute's own diploma, awarded upon passing the continuous assessment and the final integrating project. It is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or postgraduate diploma in the same area are recognised towards the advanced programme. Check the recognition policy when you enrol.
Related programmes
Postgraduate Diploma in Laboratories, Dossiers and Audits
Online 800-hour Postgraduate Diploma in Laboratories, Dossiers and Audits. 8 modules covering ISO/IEC 17025, ISO 19011 and LabWare LIMS. Dedicated tutor and open enrolment.
Postgraduate Diploma in NB-IoT/LTE-M and Deep Coverage
Online 800-hour Postgraduate Diploma in NB-IoT/LTE-M and Deep Coverage. 8 modules covering 3GPP TS 36.211, 3GPP TS 36.304 and Nordic nRF Connect SDK. Assigned tutor and…
Postgraduate Diploma in Safety Case IEC 61508/ISO 13849
Online 800 h Postgraduate Diploma in Safety Case IEC 61508/ISO 13849. 8 modules covering IEC 61508, ISO 13849-1 and IFA SISTEMA. Assigned tutor and open enrolment.
More in Electronics, Embedded Systems & Telecom
All Electronics, Embedded Systems & Telecom programmes → · How to apply · Fees & financing · Scholarships