Apply now
Postgraduate DiplomaMotorcycles & 2-Wheelers Applications open

Postgraduate Diploma in Grid-forming and Plant Control Systems

The Diploma in grid-forming and plant control systems focuses on the forefront of electricity generation and the stability of electrical networks. The program delves into grid-forming systems, the technology that allows renewable energy sources, such as solar panels and wind turbines, to operate autonomously and stable, simulating the behavior of conventional energy sources. The diploma addresses advanced control of the generation plant, including frequency and stress management, system stability and protection. The methods of modeling and simulation of electrical systems, failure analysis and the implementation of control strategies are explored.

The Diploma provides practical training through simulation laboratories and case studies, covering the integration of renewable energy, the design of control systems, and the application of international regulations. Participants prepare to lead the transition to smarter and more sustainable electrical networks, developing skills in areas such as research and development, systems engineering, and plant maintenance and operation, adapting to the requirements of the energy industry.

Keywords Objective (natural in the text): Grid-forming systems, plant control, power generation, electricity grids, renewable energy, simulation, system stability, frequency management, systems engineering, graduated in energy.

Duration6–8 months
ModeOnline
LanguageEnglish
Start datesSet by the faculty
AwardSEIUM Institute diploma
Enrol now View syllabus Ask an advisor

Postgraduate Diploma in Grid-forming and Plant Control Systems — studying from the United States

Motorcycle and two-wheeler engineering in the United States centers on established manufacturers and a strong aftermarket. Major brands such as Harley-Davidson, along with Honda, Yamaha, Kawasaki and Indian Motorcycle, maintain design and development operations in the country. The industry also includes electric two-wheeler startups and component suppliers. Engineers work on chassis, powertrain, electronics and rider safety, under federal motor vehicle and emissions regulations.

Fees for the United States: 1,440 US$ (US Dollars), with instalments and employer sponsorship available.

Relevant bodies in the United States

  • National Highway Traffic Safety Administration (NHTSA)
  • Motorcycle Industry Council (MIC)
  • SAE International
  • Environmental Protection Agency (EPA)

Typical roles

  • Motorcycle Design Engineer
  • Powertrain Engineer, Two-Wheelers
  • Chassis and Dynamics Engineer
  • Electrical Systems Engineer

Questions from the United States

Are fees shown in US Dollars?

Yes. All fees on this site are shown in US Dollars, and instalment options are available for many programmes.

Do I get a tutor?

Yes. Every learner is assigned a dedicated technical tutor who supports progress throughout the programme and the final project.

Virtual lab · try it before you enrol

Take the controls.

Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.

SIM · LIVE ●
Learning outcomes

What you will be able to do

01

Grid-forming systems mastery and plant control: comprehensive learning

02

Master's Degree in Grid-Forming Systems: Design, Operation and Optimization of Plants

03

Comprehensive user-oriented design and validation (from modeling to manufacturing)

04

Implementation and expert control of grid-forming systems for power plants

05

Unraveling grid-forming systems: control, modeling and plant performance

06

Advanced modeling and optimum rotor performance in grid-forming systems

07

Implementation and expert control of grid-forming systems in plant environments

08

Optimization of grid-forming systems: control and plant performance

Profile

Who it's for

  • Graduated engineers in electrical engineering, electronics, control, automation or related disciplines.
  • Professionals from the energy industry, including generation, transmission and distribution, who wish to specialize in network technologies.
  • Engineers from renewable energy companies (solar, wind, etc.) interested in the integration of storage and control systems.
  • Researchers and academics in areas such as power systems, power electronics and intelligent networks.
  • Professionals involved in the design, implementation and maintenance of power plants and distributed generation systems.
Recommended requirements: Basic knowledge of circuit theory, power electronics and system control. Previous experience in the energy sector will be valued. language mastery English (B2/C1).
Standards & tools

What you'll work with

  • Standards-Driven Curriculum: You will work with CS-27/CS-29, DO-160, DO-178C/DO-254, ARP4754A/ARP4761, ADS-33E-PRF from the first module.
  • Accreditable laboratories (EN ISO/IEC 17025) with rotor bench, EMC/Lightning Pre-Compliance, HIL/SIL, Vibrations/Acoustic.
  • Evidence-oriented TFM: Safety Case, Test Plan, Compliance Dossier and Operating Limits.
  • Industry Mentored: Teachers with Rotorcraft, Tiltrotor, eVTOL/UAM and Flight Test.
  • Flexible mode (hybrid/online), international cohorts and support of SEIUM Career Services.
  • Ethics and security: Safety-by-design approach, Cyber-OT, DIH and compliance as pillars.
Syllabus

10 modules

  1. 1.1Introduction to Grid-Forming Systems: Key Concepts
  2. 1.2Architecture and components of grid-forming systems
  3. 1.3Basics of control in grid-forming systems
  4. 1.4Basic modeling of power plants for grid-forming
  5. 1.5Stability analysis in grid-forming systems
  6. 1.6Voltage and frequency control strategies
  7. 1.7Interaction with the electrical network: general aspects
  8. 1.8Design of protection systems in grid-forming
  9. 1.9Typical applications and case studies
  10. 1.10Challenges and future trends in grid-forming
  1. 2.2Grid-forming Basics: Key Concepts and Architectures
  2. 2.2Grid-forming controller design: strategies and methodologies
  3. 2.3Plant modeling with grid-forming systems: simulation and analysis
  4. 2.4Operation and monitoring of grid-forming systems: implementation and practices
  5. 2.5Integration of renewable energy with grid-forming: challenges and solutions
  6. 2.6Optimization of grid-forming plant performance: strategies and techniques
  7. 2.7Protection and safety in grid-forming systems: design and operation
  8. 2.8Case studies: Implementation of grid-forming in different plants
  9. 2.9Future trends and advances in grid-forming systems
  10. 2.20Risk assessment and mitigation in grid-forming projects
  1. 3.3Advanced control structures: theoretical foundations and practical applications
  2. 3.2Mathematical modeling of grid-forming systems: advanced techniques
  3. 3.3Robust Grid-Forming Controller Design: Stability Strategies
  4. 3.4Control optimization in grid-forming: intelligent algorithms
  5. 3.5Implementation of advanced control strategies: case studies
  6. 3.6Failure management and resilience in grid-forming systems
  7. 3.7Integration of renewable energies with grid-forming control
  8. 3.8Simulation and validation of grid-forming systems: tools and methodologies
  9. 3.9Performance and evaluation of grid-forming systems: key indicators
  10. 3.30Future perspectives and trends in advanced grid-forming control
  1. 4.4Introduction to Grid-Forming: Basics and Key Concepts
  2. 4.2Grid-forming systems architecture: components and design
  3. 4.3Voltage and frequency control in grid-forming systems
  4. 4.4Advanced control strategies: modeling and simulation
  5. 4.5Implementation of grid-forming systems: hardware and software
  6. 4.6Integration of renewable energy with grid-forming
  7. 4.7Testing and validation of grid-forming systems
  8. 4.8Case Studies: Real Grid-Forming Applications
  9. 4.9Regulatory aspects and standards in grid-forming
  10. 4.40Future of Grid-Forming: Trends and Challenges
  1. 5.5Introduction to Grid-Form: Definition and Evolution
  2. 5.5Key components of grid-forming systems
  3. 5.3Comparison with Grid-Following technologies
  4. 5.4Advantages and challenges of grid-forming
  5. 5.5Current and future grid-forming applications
  6. 5.5Architecture and design of grid-forming systems
  7. 5.5Component selection: inverters, drivers, etc.
  8. 5.3Plant Configuration: Topology and Distribution
  9. 5.4Island operation and network synchronization
  10. 5.5Security and protection considerations
  11. 3.5Advanced Control Strategies: Predictive, Adaptive Control
  12. 3.5Stability and robustness of grid-forming systems
  13. 3.3Applications in micronets and smart networks
  14. 3.4Integration of renewable energy with grid-forming
  15. 3.5Failure analysis and risk mitigation
  16. 4.5Implementation process: planning and execution
  17. 4.5Parameter configuration and calibration
  18. 4.3Testing and validation of grid-forming systems
  19. 4.4Integration with Energy Management Systems (EMS)
  20. 4.5Documentation and maintenance of the plant
  21. 5.5Grid-forming systems modeling: tools and techniques
  22. 5.5Simulation of operational scenarios
  23. 5.3Stability analysis and transient response
  24. 5.4Performance evaluation: efficiency and reliability
  25. 5.5Design optimization to improve performance
  26. 6.5Rotor design and analysis: technical aspects
  27. 6.5Rotor modeling in grid-forming systems
  28. 6.3Rotor performance control and optimization
  29. 6.4Impact on plant efficiency and life
  30. 6.5Selection of rotors for different applications
  31. 7.5Adaptation of grid-forming systems to plant environments
  32. 7.5Integration with existing infrastructure
  33. 7.3Communication management and control
  34. 7.4Environmental and regulatory considerations
  35. 7.5Case studies and best practices
  36. 8.5Plant optimization: control and performance
  37. 8.5Data analysis and performance monitoring
  38. 8.3Predictive maintenance strategies
  39. 8.4Energy management and cost reduction
  40. 8.5Continuous improvement and adaptation to market changes
  1. 6.6Fundamentals of Grid-Forming and its evolution
  2. 6.2Key components of a grid-forming system
  3. 6.3Comparison with Grid-Following: Advantages and Challenges
  4. 6.4Standards and regulations in grid-forming
  5. 6.5Initial case studies and applications
  6. 2.6Topology of grid-forming systems
  7. 2.2Component selection: inverters, converters, etc.
  8. 2.3Control Design: Strategies and Algorithms
  9. 2.4System modeling and simulation
  10. 2.5Design considerations for connectivity and scalability
  11. 3.6Voltage and frequency control strategies
  12. 3.2Active and reactive power control
  13. 3.3Advanced control techniques: stability and robustness
  14. 3.4Implementation of protection and security in grid-forming
  15. 3.5Integration with energy management systems
  16. 4.6Selection of hardware and software for implementation
  17. 4.2Device configuration and calibration
  18. 4.3Testing and validation of grid-forming systems
  19. 4.4Implementation in existing and new plants
  20. 4.5Troubleshooting and system maintenance
  21. 5.6Component modeling in grid-forming
  22. 5.2Simulation of power systems with grid-forming
  23. 5.3System Stability and Performance Analysis
  24. 5.4Design optimization for performance
  25. 5.5Evaluation of the impact on energy quality
  26. 6.6Dynamic modeling of rotary machines in grid-forming
  27. 6.2Vibration and Unbalance Analysis
  28. 6.3Rotor control design: stability and efficiency
  29. 6.4Rotor Failure Mitigation Techniques
  30. 6.5Performance evaluation and design optimization
  31. 7.6Integration with existing electrical networks
  32. 7.2Case studies in real environments
  33. 7.3Safety and regulations considerations
  34. 7.4Remote monitoring and monitoring of plants
  35. 7.5Adaptation to different operating conditions
  36. 8.6Control optimization for greater efficiency
  37. 8.2Long-term system performance analysis
  38. 8.3Failure mitigation and predictive maintenance strategies
  39. 8.4Economic evaluation and ROI of the systems
  40. 8.5Continuous improvements and future trends in grid-forming
  1. 7.7Introduction to grid-forming systems and their importance
  2. 7.2Comparison with Grid-Following systems
  3. 7.3Key components of grid-forming systems
  4. 7.4Advantages and disadvantages of grid-forming technology
  5. 7.7Fundamentals of control and stability in electrical systems
  6. 2.7Grid-forming converter design: topologies and selection
  7. 2.2Modeling and simulation of grid-forming systems
  8. 2.3Control strategies for island and parallel operation
  9. 2.4Design of protection and security systems
  10. 2.7Selection of equipment and sizing of plants
  11. 3.7Voltage and frequency control in grid-forming systems
  12. 3.2Advanced control strategies: predictive, adaptive
  13. 3.3Applications in Renewable Energy Systems and Microgrids
  14. 3.4Integration of grid-forming systems in the electrical network
  15. 3.7System stability and robustness analysis
  16. 4.7Selection and installation of grid-forming equipment
  17. 4.2Configuration and commissioning of control systems
  18. 4.3Testing and validation of grid-forming systems
  19. 4.4Troubleshooting and maintenance
  20. 4.7Integration with energy management systems
  21. 7.7Key Component Modeling: Converters, Generators
  22. 7.2Transient analysis and dynamic stability
  23. 7.3Evaluation of plant performance under different conditions
  24. 7.4System performance optimization
  25. 7.7Simulation and analysis tools
  26. 6.7Rotor design and control in grid-forming systems
  27. 6.2Aerodynamic and electrical modeling of rotors
  28. 6.3Rotor performance and efficiency optimization
  29. 6.4Failure analysis and mitigation strategies
  30. 6.7Integration of rotors in the control system
  31. 7.7Implementation of grid-forming systems in real environments
  32. 7.2Integration with existing systems and electrical networks
  33. 7.3Security and regulations considerations
  34. 7.4Implementation Case Studies
  35. 7.7Challenges and solutions in implementation
  36. 8.7Plant control optimization strategies
  37. 8.2Monitoring and analysis of plant performance
  38. 8.3Optimization of energy consumption and operating costs
  39. 8.4Implementation of improvements and updates
  40. 8.7Assessment of the environmental and economic impact
  1. 8.8Control strategies for plant optimization
  2. 8.8Advanced modeling for performance improvement
  3. 8.3Voltage and frequency control optimization
  4. 8.4Parameter adjustment and fine tuning
  5. 8.5Design of robust control strategies
  6. 8.6Energy management and power flow optimization
  7. 8.7System failure analysis and mitigation
  8. 8.8Simulation and validation of optimized models
  9. 8.8Implementation of advanced control algorithms
  10. 8.80Case study: Optimization of performance in real scenarios
  1. 9.9Introduction to grid-forming systems: concepts and fundamentals
  2. 9.9Grid-forming systems architecture: components and design
  3. 9.3Component selection: Converters, sensors and actuators
  4. 9.4Design of electrical networks with grid-forming: topologies and configuration
  5. 9.5Dimensioning and technical specifications
  6. 9.6Case studies: Grid-forming plant design
  7. 9.7Design and simulation tools
  8. 9.9Principles of operation Grid-forming
  9. 9.9Voltage and frequency control strategies
  10. 9.3Active and reactive power control
  11. 9.4Coordination and communication in grid-forming systems
  12. 9.5Operation in isolated and network connected mode
  13. 9.6Monitoring and monitoring of the operation
  14. 9.7Communication and security protocols
  15. 3.9Advanced voltage and frequency control
  16. 3.9Stability and damping control
  17. 3.3Predictive and adaptive control techniques
  18. 3.4Robust driver design
  19. 3.5Mitigation of disturbances and failures
  20. 3.6Artificial intelligence applications in control
  21. 3.7Testing and validation of advanced control strategies
  22. 4.9Introduction to Expert Systems in Power Plants
  23. 4.9Architecture and design of expert systems
  24. 4.3Implementation of intelligent control algorithms
  25. 4.4Integration of expert systems in the control platform
  26. 4.5Monitoring and monitoring based on expert systems
  27. 4.6Practical applications of expert systems
  28. 4.7Case Studies: Successful Implementation
  29. 5.9Grid-forming plant component modeling
  30. 5.9Simulation and analysis of grid-forming systems
  31. 5.3Stability and performance analysis
  32. 5.4Plant performance optimization
  33. 5.5Simulation and analysis tools
  34. 5.6Model validation and fine adjustment
  35. 5.7Sensitivity analysis and scenarios
  36. 6.9Rotor modeling in grid-forming systems
  37. 6.9Rotor dynamics and vibration analysis
  38. 6.3Rotor control and performance optimization
  39. 6.4Rotor failures and mitigation strategies
  40. 6.5Advanced analysis methods
  41. 6.6Integration of the rotor model in the system
  42. 6.7Case studies: Rotor modeling and analysis
  43. 7.9Site selection and plant design
  44. 7.9Integration of grid-forming systems in real environments
  45. 7.3Configuration and commissioning
  46. 7.4Tests and commissioning
  47. 7.5Operation and maintenance
  48. 7.6Troubleshooting and Failures
  49. 7.7Updates and modernization
  50. 8.9Plant design optimization
  51. 8.9Plant control optimization
  52. 8.3Operational performance optimization
  53. 8.4Cost-benefit analysis
  54. 8.5Key Performance Indicators (KPIs)
  55. 8.6Continuous optimization strategies
  56. 8.7Implementation of improvements
  57. 9.9Overview of grid-forming systems
  58. 9.9Current and future trends
  59. 9.3Challenges and opportunities
  60. 9.4Regulatory framework and standards
  61. 9.5Environmental impact and sustainability
  62. 9.6Case studies and best practices
  63. 9.7Industry Outlook
  64. 9.8Innovation and technological development
  65. 9.9The future of grid-forming systems
  66. 9.90Conclusions and recommendations
  1. 1. Grid-forming systems mastery and plant control: comprehensive learning
  2. 1.1Grid-forming Basics: Key Architecture and Components
  3. 1.2Modeling and simulation of grid-forming systems
  4. 1.3Control Strategies for Network Formation
  5. 1.4Robust driver design
  6. 1.5Integration of renewable energy sources
  7. 1.6Stability analysis in grid-forming systems
  8. 1.7Plant performance optimization
  9. 1.8Implementation and testing in real environments
  10. 1.9Advanced monitoring and diagnostics
  11. 1.10Case Study: Practical Applications
  12. 2. Master's Degree in Grid-Forming Systems: Design, Operation and Optimization of Plants
  13. 2.1Detailed design of grid-forming systems
  14. 2.2Selection and dimensioning of components
  15. 2.3Efficient operation of grid-forming plants
  16. 2.4Advanced control strategies
  17. 2.5Optimization of energy performance
  18. 2.6Integration with the existing power grid
  19. 2.7Failure analysis and mitigation
  20. 2.8Simulation and validation of models
  21. 2.9Implementation and commissioning
  22. 2.10Case Study: Plant Design and Operation
  23. 3. Deep analysis of grid-forming systems: advanced control and strategic applications
  24. 3.1Predictive and adaptive control
  25. 3.2Distributed control in grid-forming systems
  26. 3.3Strategic applications in smart networks
  27. 3.4Protection of grid-forming systems
  28. 3.5Power Storage Integration
  29. 3.6Data analysis and performance optimization
  30. 3.7Cybersecurity in grid-forming systems
  31. 3.8Regulation and regulations
  32. 3.9Future trends and technological advances
  33. 3.10Case Study: Strategic Applications
  34. 4. Implementation and expert control of grid-forming systems for power plants
  35. 4.1Controller design for complex environments
  36. 4.2Implementation in hardware and software
  37. 4.3Laboratory testing and validation
  38. 4.4Integration with energy management systems
  39. 4.5Advanced stability and resilience control
  40. 4.6Real-time monitoring and diagnostics
  41. 4.7Optimization of performance in variable conditions
  42. 4.8Fault management and recovery
  43. 4.9Regulatory compliance and certification
  44. 4.10Case study: Implementation in power plants
  45. 5. Unraveling grid-forming systems: control, modeling and plant performance
  46. 5.1Mathematical modeling of grid-forming systems
  47. 5.2Design of control strategies
  48. 5.3Simulation and performance analysis
  49. 5.4Voltage and frequency control
  50. 5.5Dynamic stability optimization
  51. 5.6Harmonic analysis and energy quality
  52. 5.7Integration of different energy sources
  53. 5.8Protection and security design
  54. 5.9Long-term performance assessment
  55. 5.10Case study: control, modeling and performance
  56. 6. Advanced modeling and optimum rotor performance in grid-forming systems
  57. 6.1Detailed modeling of synchronous rotors
  58. 6.2Transient behavior analysis
  59. 6.3Control design for advanced rotors
  60. 6.4Optimization of energy performance
  61. 6.5Stability analysis in rotary systems
  62. 6.6Vibration and noise mitigation
  63. 6.7Integration with plant control systems
  64. 6.8Fault analysis and protection design
  65. 6.9Simulation and validation of models
  66. 6.10Case Study: Rotor Performance
  67. 7. Implementation and expert control of grid-forming systems in plant environments
  68. 7.1Design of control systems for plants
  69. 7.2Hardware selection and integration
  70. 7.3Control software development
  71. 7.4Testing and validation in real environments
  72. 7.5Plant performance optimization
  73. 7.6Advanced Stability and Power Control
  74. 7.7Real-time monitoring and diagnostics
  75. 7.8Fault management and recovery
  76. 7.9Regulatory compliance and certification
  77. 7.10Case study: Implementation in plants
  78. 8. Optimization of grid-forming systems: control and plant performance
  79. 8.1Optimization of grid-forming systems design
  80. 8.2Advanced control strategies
  81. 8.3Optimization of energy performance
  82. 8.4Stability and robustness analysis
  83. 8.5Integration of variable sources
  84. 8.6Data monitoring and analysis
  85. 8.7Optimization of the total cost of the life cycle
  86. 8.8Risk mitigation strategies
  87. 8.9Operation and maintenance optimization
  88. 8.10Case Study: Plant Optimization
Methodology, software & labs

How you'll learn

  • Hands-on methodology: Test-before-you-trust, Design Reviews, Failure Analysis, Compliance Evidence.
  • Software (according to licenses/partners): MATLAB/Simulink, Python (numpy/scipy), OpenVSP, SU2/OpenFOAM, Nastran/Abaqus, AMESim/Modelica, acoustic tools, DO-178C planning toolchains.
  • SEIUM Laboratories: Scale Rotor Bank, Vibrations/Acoustics, EMC/Lightning Pre-Compliance, HIL/SIL for AFCS, Data Acquisition with Strain Gauging.
  • Standards and Compliance: EN 9100, 17025, ISO 27001, GDPR.
Laboratorios acreditables(EN ISO/IEC 17025) with Rotor bench, EMC/Lightning Pre-Compliance, HIL/SIL, Vibrations/Acoustics.
TFM orientado a evidencia:Safety case, PLAN TEST, Compliance Dossier And operating limits.
Mentorado por industria:Faculty with experience in THE FORMATION, , EVTOL/UAM and flight test.
Modalidad flexible(hybrid/online), International cohorts And support of SEIUM Career Services.
Ethics and security:Focus safety-by-design, cyber-OT, i said and fulfillment as pillars.
Career opportunities

Where this takes you

Ingeniero de Sistemas Grid-Forming (Regulación, Estabilidad de Red)Ingeniero de Control de Planta (Sistemas Grid-Forming, Estabilidad de Red)Ingeniero de Sistemas Grid-Forming y Control de Planta (Regulación, Estabilidad de Red, Operación de Planta)Ingeniero de Sistemas Grid-Forming y Control de Planta (Regulación, Estabilidad de Red, Diseño y Optimización)Ingeniero de Sistemas Grid-Forming y Control de Planta (Regulación, Estabilidad de Red, Operación de Planta)Ingeniero de Sistemas Grid-Forming y Control de Planta (Regulación, Estabilidad de Red, Operación de Planta)
Admissions & scholarships

Requirements

  • Profile: Training in Computer Engineering, Mathematics, Statistics or Related Fields; Practical experience in NLP and valued information retrieval systems.
  • Documentation: Updated CV, Academic Record, SOP/purpose Test, Examples of Projects or Code (optional).
  • Process: Application → Technical Evaluation of profile and experience → Technical Interview → Review of Practical Cases → Final Decision → Registration.
  • RATES:
    • Single Payment: 10% Discount.
    • Payment in 3 Installments: No Commissions; 30% to registration + 2 equal monthly payments of the maintenance 35%.
    • Monthly Payment: Available with Commission of 7% of the total; Annual Review.
  • Scholarships: for academic merit, economic situation and promotion of inclusion; agreements with companies in the sector for partial or total scholarships.
Consultation “Calendar & Calls”, “Scholarships & Grants” Y “Rates & Financing” In the mega-menu SEIUM

Ready to start?

Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.

Apply now Scholarships
FAQ

Frequently asked questions

Yes, we have international certification

Yes: Experimental models, Real data, Applied simulations, Professional environments, REAL STUDY CASE.

It is not mandatory. We offer Leveling tracks And tutoring

Totally. IT Covers e-Propulsion, Integration and Emerging Regulations (SC-VTOL).

RECOMMENDED. There's also Internal Challenges and Consortiums.

Yes. Modality Online/Hybrid with Planned Laboratories and Visa Support (see “Visa & Residence”).

Keep exploring

Related programmes

See all in Motorcycles & 2-Wheelers
Postgraduate Diploma1,220 US$

Postgraduate Diploma in Road Prevention and Education Programmes 2R

Online postgraduate diploma of 800 h in Road Prevention and Education Programmes 2R. 8 modules covering ISO 39001:2012, Real Decreto 1428/2003 (General Traffic Regulations) and QGIS.…

800 hOnlineMotorcycles & 2-Wheelers
Postgraduate Diploma1,670 US$

Postgraduate Diploma in MAI Telematics and Cooperative V2X 2R

Online 800-hour Postgraduate Diploma in MAI Telematics and Cooperative V2X 2R. 8 modules covering ETSI EN 302 637-2, ETSI EN 302 637-3 and Veins. Assigned tutor…

800 hOnlineMotorcycles & 2-Wheelers
Postgraduate Diploma1,670 US$

Postgraduate Diploma in AC/DC Charging Strategies and Route Planning

Online Postgraduate Diploma of 800 h in AC/DC Charging Strategies and Route Planning. 8 modules covering IEC 61851-1, IEC 62196-2 and MATLAB/Simulink. Assigned tutor and open…

800 hOnlineMotorcycles & 2-Wheelers
Postgraduate Diploma in Grid-forming and Plant Control SystemsEnrol
Related programmes

More in Motorcycles & 2-Wheelers

Postgraduate Diploma in ABS/MSC Calibration and Stability TestingView programme →Postgraduate Diploma in Advanced Valving and Shock Absorber Test BenchView programme →Postgraduate Diploma in Automation/MES for PTWView programme →Postgraduate Diploma in Rider Aerodynamics and Low-Drag Riding PositionsView programme →Postgraduate Diploma in Helmet and Equipment Aero DesignView programme →Postgraduate Diploma in Rider Equipment Selection and CertificationView programme →

All Motorcycles & 2-Wheelers programmes → · How to apply · Fees & financing · Scholarships

Scroll to Top
SEIUM – Institute of Advanced Engineering
Powered by  GDPR Cookie Compliance
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.