Master’s in Electrical Systems Engineering: Planning, Operation & Markets
Online master's programme of 1,900 hours in power systems engineering: planning, operation and markets. 12 modules covering system modelling, load flow, short circuits and protection, stability, transmission and generation planning, system operation, renewable integration, electricity markets, regulation and flexibility, applying Law 24/2013, Regulation (EU) 2019/943 and DIgSILENT PowerFactory, with an assigned technical tutor.
Master’s in Electrical Systems Engineering: Planning, Operation & Markets — studying from the United States
The United States operates one of the world's largest energy systems, spanning power generation, transmission, distribution and renewable resources. Utilities, grid operators and technology companies are investing in grid modernization, storage and distributed energy resources. Regional clusters in Texas, California, the Midwest and the Pacific Northwest support engineers working on transmission planning, substations and energy markets. Reliability and cybersecurity standards make grid expertise especially valuable.
Fees for the United States: US$9,970 (US Dollars), with instalments and employer sponsorship available.
Relevant bodies in the United States
Typical roles
Questions from the United States
Which US bodies and regulators govern energy and power network engineering?
In the US, the Federal Energy Regulatory Commission regulates wholesale electricity and interstate transmission, while state public utility commissions oversee distribution. The IEEE Power & Energy Society is a key professional body, and Professional Engineer licensure from state boards is common for utility engineering. SEIUM's private qualifications are not official degrees, so employers and licensing boards decide any recognition.
Do US utilities and energy employers recognize private online engineering qualifications?
US utilities, grid operators and energy firms usually require accredited engineering degrees, PE licensure for certain roles, and relevant operational experience. A private online qualification can add specialist knowledge, but it is not a standard substitute for these requirements. Its value depends on the employer's policies and on your practical background.
Can I realistically study energy and networks from the US while working full time?
Yes, the programmes are fully online, taught in English, and do not require a student visa. The time commitment is about 1,900 hours for a master's, 800 hours for a postgraduate diploma, or 300 hours for a specialist course, so plan carefully. Each student has an assigned technical tutor. Fees can be paid in instalments, and some employers sponsor professional development, so check with yours.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Model electrical power systems for steady-state analysis.
Calculate short circuits and coordinate protection.
Analyse angle, voltage and frequency stability.
Plan network and generation expansion.
Understand system operation processes.
Analyse how electricity markets work.
Interpret the European and Spanish regulatory framework for the electricity sector.
Who it's for
- Network planning engineers at TSOs and DSOs.
- System operation engineers.
- Electricity market analysts.
- Energy regulatory consultants.
- Grid studies engineers.
- Renewable integration specialists.
- Engineering or science graduates seeking to join a system operator.
What you'll work with
- Law 24/2013 (Spanish Electricity Sector Act)
- Regulation (EU) 2019/943 (internal market for electricity)
- Directive (EU) 2019/944 (common rules for the internal market for electricity)
- IEC 60909-0 (calculation of short-circuit currents)
- Regulation (EU) 2016/631 (RfG network code)
- Regulation (EU) 2017/1485 (System Operation Guideline, SO GL)
- REE Operating Procedures
- Regulation (EU) 2024/1747 (electricity market design reform)
- DIgSILENT PowerFactory
- PSS/E
- MATPOWER
- PLEXOS
- Python (pandapower)
12 modules · 1900 h
1.1System structure: generation, transmission and distribution1.2Per-unit quantities1.3Line and transformer models1.4Synchronous generator models1.5Loads and their modelling1.6Admittance matrix1.7Transmission network topology1.8The Spanish peninsular power system1.9Energy transition and system challenges1.10Case study: modelling the IEEE 14-bus network
2.1Formulation of the load flow problem2.2Newton-Raphson method2.3Fast decoupled load flow2.4DC load flow2.5Voltage and reactive power control2.6Thermal and voltage limits2.7N-1 contingency analysis2.8Optimal power flow2.9Tap-changing transformers2.10Lab: load flow and contingencies in PowerFactory
3.1Method of symmetrical components3.2Symmetrical and asymmetrical faults3.3Calculation according to IEC 609093.4Neutral earthing3.5Distance protection3.6Transformer and busbar differential protection3.7Protection coordination3.8Automatic line reclosing3.9System protection schemes3.10Practical exercise: short-circuit study of a substation
4.1Transient angle stability4.2Small-signal stability4.3Voltage stability4.4Frequency stability4.5Inertia and its reduction4.6Voltage regulators and power system stabilisers4.7RMS dynamic simulation4.8Grid-forming versus grid-following4.9System operator stability criteria4.10Lab: transient stability simulation
5.1The binding planning process5.2Demand and generation scenarios5.3Analysis of reinforcement needs5.4Probabilistic network planning5.5International interconnections and capacity5.6Integration of renewables5.7Cost-benefit analysis of reinforcements5.8Coordinated European planning: TYNDP5.9Access capacity tenders5.10Case study: evaluation of a transmission reinforcement
6.1Generation mix and adequacy6.2Capacity expansion models6.3Levelised cost of energy6.4Firm capacity and security of supply6.5Storage in planning6.6Hydrogen and new technologies6.7Spanish National Integrated Energy and Climate Plan6.8Decarbonisation scenarios6.9European Resource Adequacy Assessment (ERAA)6.10Practical exercise: generation expansion model
7.1Functions of the system operator7.2Operation scheduling7.3Economic dispatch of generation7.4Unit commitment7.5Frequency control: primary, secondary and tertiary7.6Voltage control7.7Management of technical constraints7.8Service restoration7.9REE operating procedures7.10Lab: economic dispatch and unit commitment
8.1Variability and uncertainty8.2Renewable generation forecasting8.3Grid connection requirements for generators8.4Synthetic inertia and fast response8.5Curtailment8.6Voltage control with renewables8.7Storage for operation8.8Renewable control centres8.9Operation with high renewable shares8.10Case study: analysis of a day with high renewable penetration
9.1Design of wholesale markets9.2Day-ahead market and European market coupling9.3Continuous intraday market and auctions9.4System marginal prices9.5Balancing services markets9.6Forward markets9.7Capacity mechanisms9.8Long-term PPA contracts9.9Price formation in Spain9.10Practical exercise: simplified clearing of a day-ahead market
10.1The Electricity Sector Act10.2Regulated and liberalised activities10.3Remuneration of transmission and distribution10.4Network tariffs and charges10.5The role of the CNMC10.6Internal market Directive and Regulation10.7European network codes10.8Reform of the European electricity market design10.9Protection of vulnerable consumers10.10Workshop: analysis of a CNMC network tariff circular
11.1Flexibility in the system11.2Demand-side management11.3Distributed grid storage11.4Independent demand aggregators11.5Local flexibility markets11.6The electric vehicle as a resource11.7TSO-DSO coordination11.8Grid digitalisation11.9Cybersecurity of the power system11.10Case study: flexibility services for a distribution company
12.1Definition of the system problem12.2Network modelling12.3Steady-state analysis12.4Dynamic or market analysis12.5Technical solution proposal12.6Economic and regulatory assessment12.7Validation of results12.8Conclusions and future lines of work12.9Master's Thesis report12.10Master's Thesis: defence before a panel
How you'll learn
The programme is delivered 100% online on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so it is compatible with full-time work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is DIgSILENT PowerFactory, PSS/E, MATPOWER, PLEXOS and Python (pandapower), in free, academic or evaluation versions. You work on real procedures for load flow and contingency studies, transient stability simulations and dispatch and market models. Assessment is continuous by module, plus the final Master's Thesis.
Standards covered: Law 24/2013; Regulation (EU) 2019/943; Directive (EU) 2019/944; IEC 60909-0; Regulation (EU) 2016/631; Regulation (EU) 2017/1485; REE Operating Procedures; Regulation (EU) 2024/1747.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- University degree in engineering, science or architecture, or equivalent demonstrable professional experience.
- Internet connection and a computer capable of running the programme's software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 1,900 hours over 12–14 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with DIgSILENT PowerFactory, PSS/E, MATPOWER, PLEXOS and Python (pandapower), using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the Master's Thesis. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed in a course or postgraduate diploma in the same area are recognised in the higher programme. Ask about the recognition policy when you enrol.
A university degree in engineering, science or architecture, or equivalent professional experience, plus a computer able to run the software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Master’s in Transmission Engineering, FACTS & HVDC
Online master's programme of 1,900 hours in transmission, FACTS and HVDC engineering. 12 modules covering overhead line and cable design, power electronics, FACTS devices, LCC and…
Master’s in Demand Response and Flexibility Aggregation
Online master's programme of 1,900 hours in demand response and flexibility aggregation, 12 modules covering flexible load characterisation, demand response programmes, the independent aggregator, balancing markets,…
Master’s in Data, AI & Cyber Engineering in Energy
Online master's programme of 1,900 hours in data, AI and cybersecurity engineering for the energy sector: 12 modules covering energy data engineering, machine learning, forecasting, AI…
More in Energy and Networks
All Energy and Networks programmes → · How to apply · Fees & financing · Scholarships