Master’s in ADAS and Autonomous Driving
Online master's programme of 1,900 hours in ADAS and Autonomous Driving, structured in 12 modules covering fundamentals, regulatory framework, analysis and simulation, design, components, systems integration, reliability and risk, validation, operation and project management, with ISO 26262, ISO 21448 (SOTIF), ISO/SAE 21434 and Medini Analyze, and an assigned technical tutor.
Master’s in ADAS and Autonomous Driving — studying from the United States
Regulatory affairs, safety engineering and homologation are essential across American industries, since products must meet federal and state requirements before reaching the market. Engineers in this field work on reliability, availability, maintainability and safety (RAMS) analysis, certification and conformity assessment. Sectors such as aerospace, automotive, medical devices and energy all require specialized compliance expertise. Standards organizations and government agencies define the frameworks that guide this work.
Fees for the United States: US$7,730 (US Dollars), with instalments and employer sponsorship available.
Relevant bodies in the United States
Typical roles
Questions from the United States
Which US bodies handle regulation and homologation for engineered products?
Vehicle homologation involves NHTSA and the EPA, while other sectors are overseen by agencies such as the FAA, FDA, and OSHA depending on the product. Standards bodies include ANSI, ASTM, and IEC-linked US committees. Professional certifications like ASQ's reliability credentials are also recognized. SEIUM's private qualifications are not accredited, so recognition is decided by employers or regulators.
What roles use RAMS and homologation skills in the United States?
Roles include reliability engineer, safety engineer, certification specialist, and regulatory affairs professional. Employers include aerospace, automotive, medical device, and energy companies, plus testing laboratories and consultancies. Hiring managers usually look for demonstrated experience with standards and audits, so combine your training with applied project work.
Is employer funding typical for regulatory and safety training in the US?
Many US employers support job-related training through tuition assistance or professional development programmes, with terms that vary by company. Regulated industries often invest in compliance training. SEIUM offers instalment payments, and employer sponsorship may be possible, so raise the question with your manager or HR department before enrolling.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Master the technical fundamentals of ADAS and Autonomous Driving and its regulatory vocabulary.
Apply ISO 26262, ISO 21448 (SOTIF) and ISO/SAE 21434 to real design and validation decisions.
Build and correlate calculation models with Medini Analyze and ANSYS medini.
Plan and run test campaigns on conformity test benches and in EMC pre-compliance laboratories.
Analyse operating data and translate it into engineering decisions.
Prepare the technical and compliance dossier required by the client or the regulator.
Lead a ADAS and Autonomous Driving project technically from start to finish.
Who it's for
- Functional safety engineers who want to take the lead in ADAS and Autonomous Driving.
- Type-approval managers responsible for certification files and regulatory changes.
- RAMS specialists working on safety-critical products.
- Product quality auditors who need a solid grounding in the applicable standards.
- Regulatory compliance managers.
- Certification managers.
- Engineering or science graduates looking to enter the automotive sector.
What you'll work with
- ISO 26262 (functional safety of road vehicles)
- ISO 21448 (SOTIF – safety of the intended functionality)
- ISO/SAE 21434 (road vehicle cybersecurity engineering)
- UNECE R155 (cybersecurity management system)
- UNECE R156 (software update management system)
- UNECE R157 (automated lane keeping systems)
- IEC 61508 (functional safety of E/E/PE systems)
- EN 50126 (railway RAMS)
- EN 50128 (railway software)
- EN 50129 (railway safety-related electronic systems)
- Medini Analyze
- ANSYS medini
- Isograph Reliability Workbench
- PTC Windchill FMEA
- Enterprise Architect
12 modules
1.1Core concepts and magnitudes of ADAS and Autonomous Driving1.2Technology landscape and state of the art1.3Technical terminology and reference documentation1.4Physical and engineering principles applied to the case1.5Functional architecture: from requirements to components1.6Interfaces and dependencies with adjacent systems1.7Typical use cases in the sector1.8Common errors and how to detect them early1.9Data sources and quality criteria1.10Guided exercise: initial diagnosis
2.1Applicable regulatory framework: overview2.2Regulatory hierarchy and conflicts between standards2.3Mandatory requirements versus good practice2.4Acceptance criteria and required evidence2.5Technical documentation and traceability2.6Change management and configuration control2.7Audits, inspections and non-conformities2.8Responsibilities and allocation of scope2.9Interpretation of critical clauses2.10Exercise: regulatory checklist
3.1Setting up the model: assumptions and simplifications3.2Selection of tools and working environment3.3Preparation of input data3.4Workflow and good modelling practice3.5Discretisation and case preparation3.6Boundary conditions and load cases3.7Convergence control and numerical verification3.8Sensitivity analysis and parametric study3.9Automation and reuse of models3.10Exercise: building a base model
4.1Reduced-order models and detailed models4.2Coupling between physical domains4.3Parameter calibration with real data4.4Uncertainty propagation4.5Multi-objective optimisation4.6Digital twins and in-service models4.7Computational cost and calculation strategies4.8Cross-validation of results4.9Model documentation and versioning4.10Exercise: complete simulation campaign
5.1Design requirements and starting criteria5.2Solution alternatives and comparative analysis5.3Sizing and safety margins5.4Selection of materials, equipment or components5.5Integration with the rest of the system5.6Cost, schedule and manufacturing constraints5.7Reliability, maintainability and service life5.8Sustainability and efficiency in design5.9Design review and risk management5.10Exercise: documented design proposal
6.1Material families and selection criteria6.2Critical components and their failure modes6.3Manufacturing processes and their limits6.4Tolerances, fits and dimensional control6.5Treatments, coatings and protection6.6Emerging technologies applicable to ADAS and Autonomous Driving6.7Obsolescence and continuity of supply6.8Environmental footprint and circular economy6.9Approval of components and suppliers6.10Exercise: comparative technical data sheet
7.1System architecture and functional breakdown7.2Interface definition and control7.3Protocols and data exchange7.4Progressive integration and interface testing7.5Electromagnetic and environmental compatibility7.6Configuration management of the whole system7.7Resolving conflicts between subsystems7.8Commissioning of the integrated system7.9Traceability from requirements to verification7.10Exercise: interface matrix
8.1Hazard identification and preliminary analysis8.2Failure modes and effects analysis8.3Fault trees and quantitative analysis8.4Allocation of reliability targets8.5Barriers, redundancy and fault tolerance8.6Human factors and operating errors8.7Safety evidence and argumentation8.8Risk management throughout the life cycle8.9Indicators and in-service monitoring8.10Exercise: risk analysis of a case
9.1Verification and validation strategy9.2Test plan: scope and coverage9.3Instrumentation and data acquisition9.4Laboratory testing versus field testing9.5Model-to-measurement correlation9.6Handling uncertainty and tolerances9.7Failure analysis and corrective actions9.8Commissioning and acceptance criteria9.9Documentation of the validation file9.10Exercise: validation report
10.1Commissioning and handover to operation10.2Preventive and predictive maintenance plans10.3Condition monitoring and diagnostics10.4Spare parts, logistics and availability10.5Obsolescence management and upgrades10.6Availability and performance indicators10.7Life-cycle cost10.8Life extension and repowering10.9Decommissioning and end of life10.10Exercise: maintenance plan
11.1Scope, schedule and cost of the technical project11.2Estimating and budget control11.3Procurement and supplier relations11.4Technical teams and communication11.5Technical and economic feasibility analysis11.6Environmental and social criteria11.7Sustainability regulations and reporting11.8Change management and stakeholders11.9Project close-out and lessons learned11.10Exercise: business case
12.1Choice of topic and scope of the work12.2State of the art and review of sources12.3Problem statement and objectives12.4Applied research methodology12.5Technical development supervised by the thesis director12.6Analysis of results and discussion12.7Conclusions and future lines of work12.8Writing the dissertation12.9Preparing the defence12.10Master's Thesis: defence before a panel and assessment
How you'll learn
100% online training on the SEIUM Institute campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so the programme is compatible with full-time work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Medini Analyze, ANSYS medini, Isograph Reliability Workbench, PTC Windchill FMEA and Enterprise Architect, in free, academic or evaluation versions. Testing is studied using real procedures from conformity test benches, EMC pre-compliance laboratories and safety-validation HIL. Assessment is continuous by module plus the final Master's Thesis.
Standards covered: ISO 26262, ISO 21448 (SOTIF), ISO/SAE 21434, UNECE R155, UNECE R156, UNECE R157, IEC 61508, EN 50126 (RAMS), EN 50128, EN 50129.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- A university degree in engineering, science or architecture, or equivalent demonstrable professional experience.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 1,900 hours over 12–14 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with Medini Analyze, ANSYS medini, Isograph Reliability Workbench and PTC Windchill FMEA, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the Master's Thesis. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed in a course or postgraduate diploma in the same area are recognised in the higher programme. Ask about the recognition policy when you enrol.
A university degree in engineering, science or architecture (or equivalent professional experience), a suitable computer and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Master’s in Vehicle Cybersecurity Engineering and OTA Updates
Online master's programme of 1,900 hours in vehicle cybersecurity and OTA update engineering, structured in 12 modules covering the connected vehicle attack surface, E/E architecture and…
Master’s in RAMS Engineering for Transport
Online master's programme of 1,900 hours in RAMS engineering for transport. 12 modules covering the RAMS life cycle, railway risk analysis, signalling, rolling stock, infrastructure, road,…
Master’s in Active/Passive Safety Engineering, ADAS & Autonomous Vehicles
Online master's programme of 1,900 hours in active and passive safety, ADAS and autonomous vehicle engineering, structured in 12 modules covering impact biomechanics, crashworthiness, restraint systems,…
More in Regulation, Safety, RAMS & Homologation
All Regulation, Safety, RAMS & Homologation programmes → · How to apply · Fees & financing · Scholarships