Course on homologation regulations for electric motorcycles
Online course of 300 hours in type-approval regulations for electric motorcycles, structured in 6 modules covering the European approval framework, electrical safety, performance and consumption, other technical requirements and procedure and documentation, with an assigned technical tutor.
Course on homologation regulations for electric motorcycles — studying from the United States
Motorcycle and two-wheeler engineering in the United States centers on established manufacturers and a strong aftermarket. Major brands such as Harley-Davidson, along with Honda, Yamaha, Kawasaki and Indian Motorcycle, maintain design and development operations in the country. The industry also includes electric two-wheeler startups and component suppliers. Engineers work on chassis, powertrain, electronics and rider safety, under federal motor vehicle and emissions regulations.
Fees for the United States: US$890 (US Dollars), with instalments and employer sponsorship available.
Relevant bodies in the United States
Typical roles
Questions from the United States
What US professional recognition exists for motorcycle and two-wheeler engineering?
There is no single licensed title for motorcycle engineers in the US. Relevant organizations include SAE International, which publishes vehicle standards, and the Motorcycle Industry Council for industry context. Vehicle safety is regulated by NHTSA and the EPA for emissions. SEIUM qualifications are private and not accredited, so recognition depends on the employer.
What career paths exist for two-wheeler engineers in the United States?
Opportunities exist with motorcycle manufacturers, component suppliers, powertrain and electric two-wheeler startups, and testing or homologation service providers. Roles include design engineer, test engineer, and performance development specialist. Demand and hiring vary by company and market, so research current openings and speak with employers in your target segment.
Can I study this while keeping a job in the US?
Yes, the programmes are 100% online and taught in English, so you study from home and need no student visa. Plan for the stated workload of 300 to 1,900 hours depending on the programme. Fees are payable in instalments, and employer sponsorship may be possible, so discuss support with your employer before you commit.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Describe the European type-approval framework for L-category vehicles.
Classify electric motorcycles into their categories and subcategories.
Apply the electrical safety requirements of UN/ECE Regulation No. 136.
Interpret power, consumption and range tests.
Identify complementary compatibility and safety requirements.
Prepare type-approval and registration documentation.
Plan a complete type-approval project.
Who it's for
- Type-approval engineers.
- Technicians at technical testing services.
- Vehicle project managers.
- Quality technicians.
- Regulatory consultants.
- Electrical safety engineers.
- Engineering or science graduates looking to enter electric motorcycle manufacturing.
What you'll work with
- Regulation (EU) No 168/2013 (approval and market surveillance of L-category vehicles)
- UN/ECE Regulation No. 136 (electrical safety of L-category electric vehicles)
- Delegated Regulation (EU) No 134/2014 (environmental and propulsion performance requirements)
- Delegated Regulation (EU) No 3/2014 (vehicle functional safety requirements)
- Delegated Regulation (EU) No 44/2014 (vehicle construction and general requirements)
- UN/ECE Regulation No. 85 (measurement of net power of electric drive trains)
- UN/ECE Regulation No. 10 (electromagnetic compatibility of vehicles)
- Royal Decree 866/2010 (Spanish rules on vehicle modifications)
- Microsoft Project
- Jira
- MATLAB
- Dewesoft X
6 modules
1.1Type approval of L-category vehicles1.2Categories L1e to L7e1.3Electric motorcycle subcategories1.4Delegated acts on functional safety1.5Delegated acts on vehicle construction1.6Environmental and propulsion requirements1.7Approval authorities and technical services1.8Conformity of production1.9Small-series type approval1.10Workshop: classifying electric vehicles into L categories
2.1Protection against electric shock2.2Requirements of UN/ECE Regulation No. 1362.3Insulation and resistance2.4Equipotential bonding2.5Traction battery safety2.6Protection against water2.7Indication of ready-to-drive mode2.8Disconnection in the event of a crash2.9High-voltage labelling2.10Practical: measuring insulation resistance
3.1Continuous rated power3.2Maximum 30-minute power3.3Maximum design speed3.4Electric energy consumption3.5Approved electric range3.6The WMTC cycle and its phases3.7Chassis dynamometer testing3.8Tolerances and declarations3.9Comparison with commercial data3.10Lab: interpreting a consumption and range report
4.1Vehicle electromagnetic compatibility4.2Acoustic vehicle alerting for pedestrians4.3Braking of electric motorcycles4.4Lighting and signalling4.5Controls and tell-tales4.6Protection against unauthorised use4.7Statutory plate and identification4.8Tyre requirements4.9Cybersecurity as an emerging requirement4.10Case study: checklist for an electric moped
5.1Manufacturer's technical file5.2Test reports5.3Certificate of conformity5.4Technical data sheet in Spain5.5Vehicle registration5.6Modifications to electric motorcycles5.7Combustion-to-electric conversions5.8Periodic technical inspection5.9Market surveillance5.10Case study: file for an electric conversion
6.1Defining the vehicle6.2Classification into an L category6.3Identifying the applicable requirements6.4Test plan6.5Selecting a technical service6.6Schedule and costs6.7Managing non-conformities6.8Final documentation of the file6.9Report and presentation6.10Final project: final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so you can combine it with your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Microsoft Project, Jira, MATLAB and Dewesoft X, in free, academic or evaluation versions. Testing is studied through real procedures for preparing type-approval files, high-voltage insulation measurement and verification of L-category requirements. Assessment is continuous per module plus the final project.
Standards covered: Regulation (EU) No 168/2013, UN/ECE Regulation No. 136, Delegated Regulation (EU) No 134/2014, Delegated Regulation (EU) No 3/2014, Delegated Regulation (EU) No 44/2014, UN/ECE Regulation No. 85, UN/ECE Regulation No. 10, Royal Decree 866/2010.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- No prior qualification is required.
- Internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 300 hours over 3 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with Microsoft Project, Jira, MATLAB and Dewesoft X, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute certificate, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
No prior qualification is required; you need an internet connection, a computer capable of running the programme software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Course on basic ECU control units for motorcycles
Online course of 300 hours in basic engine control units (ECUs) for motorcycles. 6 modules covering the engine control unit, maps and control strategies, communication and…
Electric scooter battery swap course
Online course of 300 hours in battery swapping for electric scooters, structured in 6 modules covering the swapping model, swappable batteries, swap stations, battery fleet management…
Basic setups course on superbikes
Online course of 300 hours in basic superbike setups. 6 modules covering racing superbikes, geometry and chassis, suspension, electronics and engine, and setup methodology, with an…
More in Motorcycles & 2-Wheelers
All Motorcycles & 2-Wheelers programmes → · How to apply · Fees & financing · Scholarships