Course in Resilience in Military Design and Sustainability
Online 300-hour course in resilience in military design and sustainability. 6 modules covering ISO 14001 (environmental management), ISO 14040 and ISO 14044 (life cycle assessment) and SimaPro. Personal tutor assigned and enrolment open.
Course in Resilience in Military Design and Sustainability — studying from the United States
Defense engineering is a major pillar of the American economy, with strong clusters in Virginia, Maryland, Alabama, Connecticut and California. Prime contractors such as Lockheed Martin, General Dynamics, Northrop Grumman and BAE Systems Inc. develop land, air and naval systems for the Department of Defense. Work spans vehicle design, weapons integration, survivability and secure systems, governed by strict security and procurement rules. Engineers in this field often hold or pursue security clearances, which shapes career paths and project access.
Fees for the United States: US$890 (US Dollars), with instalments and employer sponsorship available.
Relevant bodies in the United States
Typical roles
Questions from the United States
What US bodies and clearance rules apply to defense and land-systems engineering?
Defense engineering in the US is shaped by the Department of Defense and agencies such as the Army Contracting Command, with work often requiring security clearances issued through federal processes. Professional engineering bodies include the National Defense Industrial Association (NDIA) and ASME for mechanical systems. Licensure, where needed, comes from state boards. SEIUM's private qualifications are not official degrees and do not confer clearances or licences.
Do US defense contractors and government employers recognize private engineering qualifications?
US defense primes and government employers typically require US citizenship for many roles, security clearances, and accredited degrees or proven experience. A private online qualification is not a substitute for these and is assessed by each employer. It may complement existing expertise, but it should not be relied on as a route into cleared or government positions.
Can a US-based engineer study land-systems topics online alongside full-time work?
Yes, the programmes are online and taught in English, so you can study from home without a student visa. The workload is about 1,900 hours for a master's, 800 hours for a postgraduate diploma, or 300 hours for a specialist course. Each student receives an assigned technical tutor. Fees are payable in instalments, and some employers fund training, so you may wish to ask your employer about support.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand the relationship between resilience and sustainability in defence systems.
Apply resilient design principles to complex systems.
Evaluate lower-impact energy and propulsion alternatives.
Carry out life cycle assessments in accordance with ISO 14040 and ISO 14044.
Integrate circularity and eco-design criteria into product development.
Plan the adaptation of infrastructure to climate risks.
Develop a resilient and sustainable design project.
Who it's for
- Sustainability engineer wishing to specialise in Resilience in Military Design and Sustainability.
- Resilient design engineer wishing to specialise in Resilience in Military Design and Sustainability.
- Life cycle analyst wishing to specialise in Resilience in Military Design and Sustainability.
- Infrastructure manager wishing to specialise in Resilience in Military Design and Sustainability.
- Circular economy consultant wishing to specialise in Resilience in Military Design and Sustainability.
- Business continuity manager wishing to specialise in Resilience in Military Design and Sustainability.
- Graduates in engineering or science seeking to enter the defence sector.
What you'll work with
- ISO 14001 (environmental management)
- ISO 14040 and ISO 14044 (life cycle assessment)
- ISO 22301 (business continuity)
- IEC 60300-3-3 (life cycle costing)
- ISO 15686-5 (life cycle costing in buildings)
- Regulation (EU) 2024/1781 (eco-design for sustainable products)
- Regulation (EU) 2020/852 (EU Taxonomy)
6 modules · 300 h
1.1The concept of system resilience1.2Resilience in NATO strategy1.3Seven basic resilience requirements1.4Climate change as a threat multiplier1.5NATO action plan on climate and security1.6Carbon footprint of armed forces1.7Energy consumption in operations1.8EU roadmap on climate and defence1.9Trade-offs between capability and sustainability1.10Workshop: carbon footprint of a military base
2.1Resilient systems engineering2.2Redundancy, diversity and controlled degradation2.3Modularity and open architectures2.4Survivability and field repairability2.5Supply chain resilience2.6Critical raw materials2.7Obsolescence and DMSMS2.8Cyber resilience of platforms2.9Extended failure mode analysis2.10Case study: MOSA architecture of a vehicle
3.1Operational energy and fuel logistics3.2Sustainable fuels and HVO3.3Electrification and hybridisation of vehicles3.4Batteries in military environments3.5Microgrids at deployed bases3.6Solar energy and storage3.7Fuel cells3.8Efficiency in ships and aircraft3.9Risks of the energy transition3.10Practice: sizing a deployable microgrid
4.1Life cycle assessment under ISO 14040 and ISO 140444.2Eco-design of military equipment4.3REACH and substances in defence4.4Demilitarisation and recycling4.5Life extension and modernisation4.6Predictive maintenance and efficiency4.7Additive manufacturing in the field4.8Hazardous waste management4.9Green public procurement4.10Laboratory: comparative LCA of two materials
5.1Bases facing extreme events5.2Sea-level rise and installations5.3Extreme heat and operations5.4Resilient critical infrastructure5.5Water and self-sufficiency5.6Climate emergency management5.7NATO environmental protection standards5.8Sustainability indicators5.9Lessons from recent operations5.10Case study: climate adaptation of a naval base
6.1System selection6.2Threat and risk analysis6.3Resilience requirements6.4Sustainability requirements6.5Design alternatives6.6Life cycle assessment6.7Multi-criteria evaluation6.8Implementation roadmap6.9Report and presentation6.10Final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: students progress at their own pace within the intake, which makes it possible to combine the course with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is SimaPro, openLCA, Sphera GaBi, MATLAB, Ansys Mechanical, in free, academic or evaluation versions. Practical work draws on real procedures for life cycle assessment of systems, climate resilience studies of infrastructure and life cycle cost assessments. Assessment is continuous, module by module, plus the final integrative project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Understand the relationship between resilience and sustainability in defence systems.
Apply resilient design principles to complex systems.
Evaluate lower-impact energy and propulsion alternatives.
Carry out life cycle assessments in accordance with ISO 14040 and ISO 14044.
Integrate circularity and eco-design criteria into product development.
Where this takes you
Requirements
- No prior qualification is required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient Spanish to follow technical regulatory texts.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 300 hours, spread over 3 to 5 months. That is an average of 10 to 15 hours per week, compatible with a full-time job.
The course uses SimaPro, openLCA, Sphera GaBi, MATLAB and Ansys Mechanical. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
An SEIUM own diploma upon passing the continuous assessment and the integrative project. It is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or postgraduate diploma in the same area are credited towards the advanced programme. Please check the credit transfer policy when you enrol.
Related programmes
Course in Ethics in MUM-T (manned-unmanned teaming)
Online 300-hour course in ethics in MUM-T (manned-unmanned teaming). 6 modules covering STANAG 4586 (interoperability of UAV control systems), MIL-STD-1472H (human engineering criteria) and MATLAB/Simulink. Assigned…
Course on ISO/UNE Standards in Welding and Joining
Online 300-hour course on ISO/UNE standards in welding and joining. 6 modules covering ISO 3834 (quality requirements for welding), ISO 15614-1 (welding procedure qualification) and SYSWELD.…
IEEE Standards in Tactical Communications Course
Online 300 h course in IEEE standards for tactical communications. 6 modules covering IEEE 802.11s (wireless mesh networks), IEEE 802.16 (broadband wireless access) and NS-3. Assigned…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships