Postgraduate Diploma in Extreme Anti-Corrosion and Bodywork Sealing
Online 800-hour Postgraduate Diploma in Extreme Anti-Corrosion and Bodywork Sealing. 8 modules covering ISO 12944 (corrosion protection of steel structures by protective paint systems), ISO 8501-1 (preparation grades of steel substrates) and advanced Excel. Assigned tutor and open enrolment.
Postgraduate Diploma in Extreme Anti-Corrosion and Bodywork Sealing — studying from the United Kingdom
Classic vehicle restoration is a notable niche in the United Kingdom, supported by specialist workshops, heritage motoring events and a strong enthusiast community. Centres such as Bicester Heritage, Gaydon and the Midlands host restoration businesses, parts suppliers and engineering services for historic cars and motorcycles. Knowledge of historic materials, classic engine systems and conservation standards is valued. Organisations such as the Federation of British Historic Vehicle Clubs and the Historic Vehicle Scheme support the sector.
Fees for the United Kingdom: £746 (Pound sterling), with instalments and employer sponsorship available.
Relevant bodies in the United Kingdom
Typical roles
Questions from the United Kingdom
Is there a UK professional body or regulation for classic vehicle restoration engineering?
Restoration is largely unregulated in the UK, with no statutory title for classic vehicle restorers. Relevant organisations include the Institute of the Motor Industry and specialist classic car clubs, which offer their own training and recognition. SEIUM's private qualifications are not accredited by any national body, so their standing with these organisations is for them to decide.
Do UK classic car restorers, dealers or auction houses value private online engineering training?
The UK classic car sector tends to value hands-on craftsmanship, documented restoration projects and reputation. A private qualification may complement this by showing technical study, but it is unlikely to be the main factor in hiring or client decisions. Acceptance depends on each business.
Can I study this part-time from the UK, and does my employer need to pay?
The programmes are online and taught in English, so you can study part-time from anywhere in the UK, with no visa needed. Study ranges from 300 hours to 1,900 hours, and an assigned technical tutor supports you. Fees can be paid in instalments. Employer sponsorship is possible if your employer agrees, which is more common in larger firms.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Explain the corrosion mechanisms affecting steel bodywork.
Select the appropriate surface preparation method for each component.
Specify protection systems according to the corrosivity of the environment.
Apply sealants to joints, overlaps and bodywork connections.
Protect cavities and underbodies with waxes and specific coatings.
Repair corrosion-damaged areas while restoring protection.
Verify the quality of protection through standardised testing.
Who it's for
- Corrosion protection technician for vehicle bodywork who wishes to specialise in Extreme Anti-Corrosion and Bodywork Sealing.
- Panel and paint restorer who wishes to specialise in Extreme Anti-Corrosion and Bodywork Sealing.
- Coatings inspector who wishes to specialise in Extreme Anti-Corrosion and Bodywork Sealing.
- Quality technician in surface treatments who wishes to specialise in Extreme Anti-Corrosion and Bodywork Sealing.
- Bodyshop manager who wishes to specialise in Extreme Anti-Corrosion and Bodywork Sealing.
- Sealant application technician who wishes to specialise in Extreme Anti-Corrosion and Bodywork Sealing.
- Graduates in engineering or science seeking to enter classic vehicle restoration.
What you'll work with
- ISO 12944 (corrosion protection by paint systems)
- ISO 8501-1 (preparation grades of steel substrates)
- ISO 9227 (salt spray testing)
- ISO 9223 (corrosivity of atmospheres)
- ISO 4628 (assessment of degradation of coatings)
- ISO 2409 (cross-cut adhesion test)
- ISO 6270-2 (resistance to humidity by condensation)
8 modules · 800 h
1.1Electrochemistry of steel corrosion1.2Galvanic corrosion between metals1.3Crevice and filiform corrosion1.4Corrosion under paint and blistering1.5Effects of road salts and marine environments1.6ISO 9223 corrosivity categories1.7Critical areas: underbodies, sills and wheel arches1.8Corrosion in aluminium and magnesium1.9Mechanisms in off-road and agricultural vehicles1.10Case study: corrosion diagnosis on a 4×4
2.1ISO 8501-1 rust grades2.2Abrasive blasting and Sa grades2.3Chemical and mechanical pickling2.4Degreasing and control of soluble salts2.5Roughness and anchor profile2.6Treatment of residual rust2.7Phosphating and pretreatments2.8Cathodic electrodeposition2.9Protection of untreated areas2.10Practice: profile measurement and surface cleaning
3.1Epoxy and zinc-rich primers3.2Hot-dip galvanising to ISO 14613.3Thermal spray metallising3.4Paint systems to ISO 129443.5Polyurea coatings3.6Cavity waxes and underbody products3.7Cathodic protection and its limits3.8Compatibility between layers3.9Film thickness and control3.10Laboratory: film thickness measurement
4.1Polyurethane and MS polymer sealants4.2Sealing of welded joints4.3Factory sealing beads4.4Door seals and gaskets4.5Grommets and bodywork plugs4.6Watertightness against water and dust4.7Roof and glass sealing4.8Structural adhesives4.9Ageing of sealants4.10Workshop: joint sealing in wheel arches
5.1Access to closed cavities5.2Wax spraying with probes5.3Cavity drainage and ventilation5.4Bituminous products and anti-gravel coatings5.5Protection of chassis rails5.6Protection of brake and fuel lines5.7Endoscope inspection5.8Periodic maintenance of protection5.9Errors that trap moisture5.10Practice: cavity protection protocol
6.1Assessment of thickness loss6.2Cutting out and replacing panels6.3Welding of patches and panels6.4Protection of repair welds6.5Treatment of interior areas6.6Restoration of watertightness6.7Repair of corroded chassis6.8Structural rejection criteria6.9Repair documentation6.10Case study: repair of a perforated sill
7.1Neutral salt spray ISO 92277.2Cyclic corrosion testing7.3Cross-cut adhesion ISO 24097.4Pull-off adhesion ISO 46247.5Gravel impact testing7.6Visual inspection and rust grades7.7Thickness and porosity measurement7.8Anti-corrosion warranty criteria7.9Quality reports7.10Workshop: inspection plan for a treatment
8.1Vehicle diagnosis8.2Classification of the operating environment8.3Selection of the protection system8.4Surface preparation8.5Sealing and cavity plan8.6Quality control plan8.7Planned maintenance8.8Budget8.9Report and presentation8.10Final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetables: students progress at their own pace within the intake, making it easy to combine with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is advanced Excel, ElcoMaster (Elcometer), Minitab, SolidWorks, in free, academic or evaluation versions. Testing is studied using real procedures for salt spray chambers, film thickness measurement and endoscopic cavity inspection. Assessment is continuous across modules, plus the final integrating project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Explain the corrosion mechanisms affecting steel bodywork.
Select the appropriate surface preparation method for each component.
Specify protection systems according to the corrosivity of the environment.
Apply sealants to joints, overlaps and bodywork connections.
Protect cavities and underbodies with waxes and specific coatings.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. A university degree is not required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient Spanish to follow technical standards documentation.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme comprises 800 hours in total, spread over 6 to 8 months. That is an average of between 10 and 15 hours per week, compatible with full-time work.
You will work with advanced Excel, ElcoMaster (Elcometer), Minitab and SolidWorks. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
A SEIUM own diploma upon passing the continuous assessment and the integrating project. This is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or postgraduate diploma in the same area can be credited towards the advanced programme. Please check the credit transfer policy when you enrol.
Related programmes
Postgraduate Diploma in IP Management, Seals and Historical Documentation
Online 800 h Postgraduate Diploma in IP Management, Seals and Historical Documentation. 8 modules covering Law 17/2001 (Trade Marks), Regulation (EU) 2017/1001 (European Union trade mark)…
Diploma in Ethanol and Compatibility of Seals, Hoses and Tanks
Online postgraduate diploma of 800 hours in ethanol fuels and the compatibility of seals, hoses and tanks, with 8 modules covering ethanol fuel chemistry, elastomers and…
Postgraduate Diploma in Heavy-Duty Transmissions and Multi-Plate Clutches
800-hour online Postgraduate Diploma in Heavy-Duty Transmissions and Multi-Plate Clutches. 8 modules covering ISO 6336 (gear load capacity), AGMA 2001-D04 (gear calculation factors) and KISSsoft. Assigned…
More in Restoration & Classics
All Restoration & Classics programmes → · How to apply · Fees & financing · Scholarships