Master'sRestoration & Classics Applications open

Master’s in Metrology and Quality for Reproductions Engineering — CMM, GD&T, Control Plans, Traceability

Online master's programme of 1,900 hours in metrology and quality engineering for reproduction parts, structured in 12 modules covering traceability, measurement uncertainty, applied GD&T, coordinate measurement, optical and surface measurement, MSA, quality planning, SPC, traceability and quality management systems, with an assigned technical tutor.

Duration1900 h

ModeOnline

LanguageEnglish

Start datesSet by the faculty

AwardSEIUM Institute diploma

Enrol now View syllabus Ask an advisor

Master’s in Metrology and Quality for Reproductions Engineering — CMM, GD&T, Control Plans, Traceability — studying from the United Kingdom

Classic vehicle restoration is a notable niche in the United Kingdom, supported by specialist workshops, heritage motoring events and a strong enthusiast community. Centres such as Bicester Heritage, Gaydon and the Midlands host restoration businesses, parts suppliers and engineering services for historic cars and motorcycles. Knowledge of historic materials, classic engine systems and conservation standards is valued. Organisations such as the Federation of British Historic Vehicle Clubs and the Historic Vehicle Scheme support the sector.

Fees for the United Kingdom: £5,770 (Pound sterling), with instalments and employer sponsorship available.

Relevant bodies in the United Kingdom

Federation of British Historic Vehicle Clubs (FBHVC)
Historic Vehicle Scheme (HVS)
Driver and Vehicle Standards Agency (DVSA)
Institute of the Motor Industry (IMI)

Typical roles

Classic Vehicle Restorer
Heritage Vehicle Technician
Restoration Engineer
Classic Motorcycle Specialist

Questions from the United Kingdom

Is there a UK professional body or regulation for classic vehicle restoration engineering?

Restoration is largely unregulated in the UK, with no statutory title for classic vehicle restorers. Relevant organisations include the Institute of the Motor Industry and specialist classic car clubs, which offer their own training and recognition. SEIUM's private qualifications are not accredited by any national body, so their standing with these organisations is for them to decide.

Do UK classic car restorers, dealers or auction houses value private online engineering training?

The UK classic car sector tends to value hands-on craftsmanship, documented restoration projects and reputation. A private qualification may complement this by showing technical study, but it is unlikely to be the main factor in hiring or client decisions. Acceptance depends on each business.

Can I study this part-time from the UK, and does my employer need to pay?

The programmes are online and taught in English, so you can study part-time from anywhere in the UK, with no visa needed. Study ranges from 300 hours to 1,900 hours, and an assigned technical tutor supports you. Fees can be paid in instalments. Employer sponsorship is possible if your employer agrees, which is more common in larger firms.

Virtual lab · try it before you enrol

Take the controls.

Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.

SIM · LIVE ●

Learning outcomes

What you will be able to do

Apply the principles of metrology and traceability.

Estimate measurement uncertainty.

Interpret and apply GD&T tolerances.

Measure parts with CMMs and optical systems.

Evaluate measurement systems through MSA studies.

Plan and control the quality of reproduction parts.

Implement a quality management system.

Profile

Who it's for

Metrologists
Quality technicians
CMM programmers
Supplier quality engineers
Dimensional inspection managers
Quality auditors
Engineering or science graduates seeking to move into spare parts manufacturing

Standards & tools

What you'll work with

ISO 10360-2 (acceptance and verification of CMMs)
ISO 1101 (geometrical tolerancing)
JCGM 100:2008 (GUM, guide to the expression of uncertainty in measurement)
ISO 14253-1 (decision rules for conformity)
ISO 9001 (quality management systems)
EN 10204 (inspection documents for metallic products)
ISO 21920-2 (surface texture profile parameters)
ISO 22514-2 (process capability and performance)
PC-DMIS
Calypso
Minitab
ZEISS INSPECT
PolyWorks

Syllabus

12 modules · 1900 h

1.1International vocabulary of metrology
1.2Metrological traceability to standards
1.3Standards and calibration
1.4Accuracy, precision and resolution
1.5Systematic and random errors
1.6Control of environmental conditions
1.7Reference temperature of 20 °C
1.8Calibration laboratories
1.9Metrology in the workshop
1.10Case study: traceability chain of a micrometer

2.1The GUM and its structure
2.2Type A evaluation
2.3Type B evaluation
2.4Calculating combined uncertainty
2.5Calculating expanded uncertainty
2.6Uncertainty budgets
2.7Monte Carlo method
2.8Decision rules
2.9Reporting results
2.10Laboratory: uncertainty budget for a diameter measurement

3.1The ISO GPS language
3.2ISO 1101 and ASME Y14.5
3.3Datum systems
3.4Form tolerances
3.5Orientation tolerances
3.6Location tolerances
3.7Run-out tolerances
3.8Maximum material condition
3.9Interpreting period drawings
3.10Practical exercise: dimensioning a reproduction part

4.1Bridge CMMs
4.2Articulated measuring arms
4.3Probes and probe heads
4.4Probing strategies
4.5Part alignments
4.6CMM programming
4.7ISO 10360 verification
4.8Tolerance evaluation
4.9Measurement reports
4.10Workshop: measurement programme for a flange

5.1Structured light scanners
5.2Profile projectors
5.3Measuring microscopes
5.4Roughness and the Ra and Rz parameters
5.5Waviness measurement
5.6Thread measurement
5.7Gear measurement
5.8Comparison with CAD
5.9Method selection
5.10Laboratory: roughness measurement of a ground surface

6.1Objectives and types of MSA studies
6.2Repeatability and reproducibility
6.3Bias and linearity
6.4Stability of the measurement system
6.5Attribute studies
6.6Number of distinct categories
6.7Improving the measurement system
6.8Gauge management
6.9Complete process documentation
6.10Practical exercise: gauge R&R study

7.1Process FMEA
7.2Control plan
7.3Identifying critical characteristics
7.4Inspection frequencies
7.5Inspection instructions
7.6Check sheets
7.7Incoming inspection
7.8Final inspection and release
7.9Product audits
7.10Case study: control plan for a reproduction part

8.1Control charts
8.2Process capability
8.3Sampling by attributes
8.4Sampling by variables
8.5Short runs and SPC
8.6Root cause analysis
8.7Pareto charts
8.8Continuous improvement of the system
8.9Software tools
8.10Workshop: capability analysis with short runs

9.1Material traceability
9.2EN 10204 certificates
9.3Batch identification
9.4Marking of reproduction parts
9.5Control sheets
9.6Measurement records
9.7Document management and version control
9.8Record retention
9.9Documentation audit
9.10Practical exercise: quality dossier for a batch

10.1ISO 9001 requirements
10.2Process approach
10.3Risk management
10.4Staff competence
10.5Control of measuring equipment
10.6Non-conformities and corrective actions
10.7Internal audit programme
10.8Management review
10.9Certification process
10.10Case study: quality system for a reproduction parts manufacturer

11.1Customer expectations
11.2Concours quality
11.3Complaints and warranties
11.4Comparisons between reproductions
11.5Communicating quality
11.6Collaboration with clubs
11.7Certificates of authenticity
11.8Returns management
11.9Product improvement
11.10Workshop: complaints analysis for a product

12.1Selecting the part or process
12.2Requirements analysis
12.3GD&T dimensioning of the part
12.4Measurement plan
12.5Measurement system study
12.6Control plan
12.7Quality dossier
12.8Conclusions and future work
12.9Master's Thesis report
12.10Master's Thesis: defence before a panel

Methodology, software & labs

How you'll learn

The programme is delivered 100% online on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so it can be combined with work.

Each module combines theory, guided reading of the original standard and applied exercises. The working software is PC-DMIS, Calypso, Minitab, ZEISS INSPECT and PolyWorks, in free, academic or evaluation versions. Testing is studied through real procedures for coordinate measuring machine measurement, repeatability and reproducibility studies and process capability analysis. Assessment is continuous by module, plus the final Master's Thesis.

Standards covered: ISO 10360-2, ISO 1101, JCGM 100:2008 (GUM), ISO 14253-1, ISO 9001, EN 10204, ISO 21920-2, ISO 22514-2.

Assigned technical tutor:every module ends with a deliverable that your tutor marks individually.

Standards-based learning:guided reading of ISO 10360-2, ISO 1101 and JCGM 100:2008 (GUM) applied to real cases, not as a theoretical annex.

Industry software:PC-DMIS, Calypso, Minitab, ZEISS INSPECT and PolyWorks, in free, academic or evaluation versions.

Master's Thesis with defence:A complete metrology and quality system for a reproduction part, from GD&T to the quality dossier, defended before a panel.

Flexible format:100% online, no fixed timetables, compatible with full-time work.

Capstone project

Build it end to end

Your final project follows the real engineering workflow, step by step, reviewed by your tutor.

Requirements and GD&T

Select a part or process, analyse its requirements and dimension it with GD&T.

Measurement plan

Define the measurement methods, equipment and uncertainty budget.

Measurement system study

Validate the measurement system through an R&R study.

Control plan

Draw up the control plan and inspection frequencies.

Master's Thesis

Compile the quality dossier and present the results, defended before a panel.

Career opportunities

Where this takes you

MetrologistQuality technicianCMM programmerSupplier quality engineerDimensional inspection managerQuality auditor

Admissions & scholarships

Requirements

University degree in engineering, science or architecture, or equivalent demonstrable professional experience.
Internet connection and a computer capable of running the programme's software.
English sufficient to read technical standards.

Ready to start?

Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.

Apply now Scholarships

FAQ

Frequently asked questions

The programme totals 1,900 hours over 12–14 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.

You work with PC-DMIS, Calypso, Minitab, ZEISS INSPECT and PolyWorks, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.

A SEIUM Institute diploma, awarded on passing the continuous assessment and the Master's Thesis. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.

Yes. Modules passed in a course or postgraduate diploma in the same area are recognised in the higher programme. Ask about the recognition policy when you enrol.

A degree in engineering, science or architecture (or equivalent professional experience), a suitable computer and internet connection, and English sufficient to read technical standards.

Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.

Keep exploring

Related programmes

See all in Restoration & Classics

Master's£5,770

Master’s in Reversible Electrification of Classics Engineering — Non-Intrusive Bolt-On Conversions, HV Safety and Legalisation (Without Losing Heritage)

Online master's programme of 1,900 hours in reversible electrification engineering for classic vehicles — non-intrusive bolt-on conversions, HV safety and legalisation without losing heritage value. 12…

1900 hOnlineRestoration & Classics

Master's£6,600

Master’s in Metrology and Quality for Reproductions

Online master's programme of 1,900 hours in metrology and quality for reproduction parts. 12 modules covering metrology fundamentals, dimensional instruments, CMMs, 3D scanning, GD&T, reproduction engineering,…

1,900 hours · 12–14 monthsOnlineRestoration & Classics

Master's£7,440

Master’s in Appraisal, Valuation and Collection Management

Online master's programme of 1,900 hours in appraisal, valuation and collection management for collector vehicles, with 12 modules covering valuation principles, the collector car market, authentication,…

12–14 monthsOnlineRestoration & Classics

Master’s in Metrology and Quality for Reproductions Engineering — CMM, GD&T, Control Plans, TraceabilityEnrol

Related programmes

More in Restoration & Classics

Master’s in Micro-production of NLA PartsView programme →Master’s in Classic Suspension and BrakesView programme →Master’s in Classic Motorcycles & Two-Wheelers EngineeringView programme →Master’s in Auctions, Brokerage and Sales Management Engineering — Consignment, Due Diligence, Specialist MarketingView programme →Master’s in Collector Vehicle Logistics and Transport Engineering — Preparation, Insurance, Regulations and RoutesView programme →Master’s in Classic 4×4 and Service VehiclesView programme →

All Restoration & Classics programmes → · How to apply · Fees & financing · Scholarships