Course in Nickel Baths and Galvanising Processes
Online course of 300 h in nickel baths and galvanising processes. 6 modules covering ISO 1456 (electrolytic nickel and chromium coatings), ISO 1461 (hot-dip galvanising) and advanced Excel. Assigned tutor and open enrolment.
Course in Nickel Baths and Galvanising Processes — studying from the United Kingdom
Classic vehicle restoration is a notable niche in the United Kingdom, supported by specialist workshops, heritage motoring events and a strong enthusiast community. Centres such as Bicester Heritage, Gaydon and the Midlands host restoration businesses, parts suppliers and engineering services for historic cars and motorcycles. Knowledge of historic materials, classic engine systems and conservation standards is valued. Organisations such as the Federation of British Historic Vehicle Clubs and the Historic Vehicle Scheme support the sector.
Fees for the United Kingdom: £455 (Pound sterling), with instalments and employer sponsorship available.
Relevant bodies in the United Kingdom
Typical roles
Questions from the United Kingdom
Is there a UK professional body or regulation for classic vehicle restoration engineering?
Restoration is largely unregulated in the UK, with no statutory title for classic vehicle restorers. Relevant organisations include the Institute of the Motor Industry and specialist classic car clubs, which offer their own training and recognition. SEIUM's private qualifications are not accredited by any national body, so their standing with these organisations is for them to decide.
Do UK classic car restorers, dealers or auction houses value private online engineering training?
The UK classic car sector tends to value hands-on craftsmanship, documented restoration projects and reputation. A private qualification may complement this by showing technical study, but it is unlikely to be the main factor in hiring or client decisions. Acceptance depends on each business.
Can I study this part-time from the UK, and does my employer need to pay?
The programmes are online and taught in English, so you can study part-time from anywhere in the UK, with no visa needed. Study ranges from 300 hours to 1,900 hours, and an assigned technical tutor supports you. Fees can be paid in instalments. Employer sponsorship is possible if your employer agrees, which is more common in larger firms.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Explain the chemistry and electrochemistry of nickel plating.
Prepare substrates through degreasing, pickling and activation.
Differentiate between hot-dip and electrolytic galvanising processes.
Operate a coating line while controlling bath parameters.
Verify thickness, adhesion and corrosion resistance.
Manage effluents and restricted substances in accordance with regulations.
Design a coating process for a specific part.
Who it's for
- Surface treatment technician looking to specialise in nickel baths and galvanising processes.
- Galvanising line manager looking to specialise in nickel baths and galvanising processes.
- Bath laboratory technician looking to specialise in nickel baths and galvanising processes.
- Coating process engineer looking to specialise in nickel baths and galvanising processes.
- Industrial environmental technician looking to specialise in nickel baths and galvanising processes.
- Coating quality manager looking to specialise in nickel baths and galvanising processes.
- Graduates in engineering or science seeking to enter the surface treatment sector.
What you'll work with
- ISO 1456 (electrolytic nickel and chromium coatings)
- ISO 1461 (hot-dip galvanising)
- ISO 2081 (electrolytic zinc coatings)
- ISO 4527 (autocatalytic electroless nickel)
- ISO 2178 (magnetic method thickness measurement)
- Directive 2010/75/EU (industrial emissions)
- Regulation (EC) 1907/2006 (REACH)
6 modules · 300 h
1.1Electrochemistry of metal deposition1.2Faraday's laws and cathodic efficiency1.3Watts bath: sulphate, chloride and boric acid1.4Nickel sulphamate baths1.5Electroless nickel with hypophosphite1.6Brighteners, levellers and wetting agents1.7Control of pH, temperature and current density1.8Metallic and organic contamination of the bath1.9Toxicity and handling of nickel salts1.10Practical: volumetric analysis of nickel and chlorides
2.1Inspection and dismantling of period parts2.2Stripping of old chromium and nickel2.3Alkaline and electrolytic degreasing2.4Pre-polishing and removal of pitting2.5Acid copper levelling strike2.6Acid activation of steel2.7Treatment of zamak and brass parts2.8Racks, contacts and shielding2.9Prevention of hydrogen embrittlement2.10Workshop: preparing a bumper for nickel plating
3.1Hot-dip galvanising to ISO 14613.2Acid and alkaline electrolytic zinc plating3.3Zinc-nickel alloys in the automotive sector3.4Trivalent passivates and conversion coatings3.5Sherardising and mechanical zinc plating3.6Zinc thickness and cathodic protection3.7Fasteners and fittings for classic vehicles3.8Compatibility with subsequent paints3.9Removal of old zinc coatings3.10Laboratory: zinc plating and passivation of fasteners
4.1Design of tanks, anodes and rectifiers4.2Continuous filtration and activated carbon4.3Hull cell for bath adjustment4.4Selective electrolysis for purification4.5Air agitation and cathode movement4.6Calculation of times and target thicknesses4.7Bright, semi-bright and duplex nickel plating4.8Defects: burning, pitting and poor adhesion4.9Recording of parameters and traceability4.10Practical: Hull cell test and correction
5.1Thickness measurement by XRF and magnetic methods5.2Neutral salt spray test to ISO 92275.3CASS test for nickel-chromium5.4Adhesion by bending and thermal shock5.5Requirements of ISO 1456 for nickel-chromium5.6Treatment of wastewater containing heavy metals5.7Sludge and hazardous waste management5.8Occupational exposure and REACH restrictions5.9Extraction and control of acid mists5.10Case study: audit of a plating workshop
6.1Selection of parts and initial diagnosis6.2Definition of the process sequence6.3Bath formulation and set-up6.4Preparation and rack loading6.5Coating execution6.6Inspection of thickness and appearance6.7Accelerated corrosion testing6.8Cost and time analysis6.9Report and presentation6.10Final review with the tutor
How you'll learn
Fully 100 % online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetable: students progress at their own pace within the intake, which allows them to combine study with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is advanced Excel, Minitab, MATLAB, Fischer WinFTM (coating thickness by X-ray fluorescence), in free, academic or evaluation versions. Tests are studied using real procedures for bath analytical control, coating thickness measurement and salt spray testing. Assessment is continuous, module by module, plus the final integrative project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Explain the chemistry and electrochemistry of nickel plating.
Prepare substrates through degreasing, pickling and activation.
Differentiate between hot-dip and electrolytic galvanising processes.
Operate a coating line while controlling bath parameters.
Verify thickness, adhesion and corrosion resistance.
Where this takes you
Requirements
- No prior degree required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient level of Spanish to follow technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 300 hours spread over 3 to 5 months. That is an average of 10 to 15 hours per week, compatible with a full-time job.
You work with advanced Excel, Minitab, MATLAB, Fischer WinFTM (coating thickness by X-ray fluorescence). Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
A SEIUM own diploma upon passing continuous assessment and the integrative project. It is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or postgraduate diploma in the same area are recognised towards the higher programme. Check the recognition policy when you enrol.
Related programmes
Classic Convertible Hoods Course: Materials and Correct Tensioning
Online 300-hour course in classic convertible hoods: materials and correct tensioning. 6 modules covering ISO 3795 (flammability of interior materials), ISO 13934-1 (tensile strength of textiles)…
Course in Case Studies: Carrera Panamericana
Online 300-hour course in case studies: Carrera Panamericana. 6 modules with the FIA International Sporting Code, Appendix K to the FIA International Sporting Code (historic vehicles)…
Course in Gap Adjustment and Alignment of Vintage Doors
Online 300 h course in gap adjustment and alignment of vintage doors. 6 modules covering ISO 1101 (geometrical product specification: tolerances), ISO 2768-1 (general tolerances) and…
More in Restoration & Classics
All Restoration & Classics programmes → · How to apply · Fees & financing · Scholarships