Course in HSE Risk Management on Ships
Online 300-hour course in HSE risk management on ships. 6 modules covering the ISM Code, MLC 2006 Convention and Helm CONNECT. Dedicated tutor and enrolment open.
Course in HSE Risk Management on Ships — studying from the United Kingdom
Naval and offshore engineering is a significant sector in the United Kingdom, with shipbuilding and naval programmes on the Clyde, in Portsmouth, Barrow-in-Furness and Rosyth, and offshore energy activity in Aberdeen and the North Sea. Companies such as BAE Systems Maritime, Babcock and offshore service providers employ engineers in design, construction and maintenance. Sports nautical engineering, including yacht design and marine leisure, is concentrated in the Solent and South Coast. The Maritime and Coastguard Agency regulates shipping safety, and the Royal Institution of Naval Architects supports professional standards.
Fees for the United Kingdom: £537 (Pound sterling), with instalments and employer sponsorship available.
Relevant bodies in the United Kingdom
Typical roles
Questions from the United Kingdom
Which UK bodies relate to naval and marine engineering, and does SEIUM training count towards them?
Key UK bodies include the Royal Institution of Naval Architects, the Institute of Marine Engineering, Science and Technology and the Institution of Mechanical Engineers. Maritime qualifications are often regulated through the Maritime and Coastguard Agency for certificates of competency. SEIUM's private qualifications are not accredited by these bodies, so any recognition would be decided by them separately.
Will UK offshore, naval or marine employers value a private online engineering qualification?
Employers in these sectors often prioritise certified competencies, sea-going experience and regulatory certificates. A private qualification may support your application where it shows relevant technical depth, but it does not replace statutory requirements. Acceptance is for each employer to decide, so consider how the qualification complements your existing certifications.
Can I study this online from the UK alongside offshore rotations, and is language support available?
Online study can be flexible, but rotation patterns make scheduling important, so plan around your time at sea or on site. Programmes are taught entirely in English, and each learner is assigned a technical tutor. No visa is required to study from within the UK. Fees can be paid in instalments, and employer sponsorship is possible.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand the HSE approach and safety culture on board ship.
Assess task and operational risks using structured methods.
Control high-risk work through permits to work.
Manage occupational health and crew wellbeing.
Integrate pollution prevention into day-to-day management.
Measure HSE performance using proactive and reactive indicators.
Design an HSE risk management plan for a ship.
Who it's for
- Fleet HSE superintendent looking to specialise in HSE Risk Management on Ships.
- Shipboard safety officer looking to specialise in HSE Risk Management on Ships.
- Maritime prevention technician looking to specialise in HSE Risk Management on Ships.
- Designated person ashore looking to specialise in HSE Risk Management on Ships.
- HSE auditor looking to specialise in HSE Risk Management on Ships.
- Shipping company quality manager looking to specialise in HSE Risk Management on Ships.
- Engineering or science graduates looking to enter shipping companies.
What you'll work with
- ISM Code
- MLC 2006 Convention
- ISO 45001:2018
- OCIMF TMSA 3
- FSA Guidelines (MSC-MEPC.2/Circ.12)
- IMO Resolution A.1050(27) on entry into enclosed spaces
- STCW Convention
- ISO 14001:2015
6 modules · 300 h
1.1The HSE approach in the maritime industry1.2Typical hazards on board1.3Safety culture and leadership1.4ISM Code and the management system1.5MLC Convention and occupational health1.6Vetting and TMSA requirements1.7Responsibilities of the master and officers1.8Proactive and reactive indicators1.9Accident statistics in the merchant navy1.10Case study: diagnosing safety culture on a ship
2.1Formal Safety Assessment (FSA)2.2Task risk assessment2.3Risk matrices on board2.4HAZID for cargo operations2.5Job Safety Analysis (JSA)2.6Management of change2.7Human factors and ergonomics2.8Fatigue and rest hours2.9Psychosocial risks on board2.10Workshop: risk assessment of work at height
3.1Permit-to-work system3.2Entry into enclosed spaces3.3Hot work3.4Energy isolation and lock-out3.5Work at height and over the side3.6Mooring operations3.7Lifting and handling of loads3.8Electrical work on board3.9Personal protective equipment3.10Practical: entry permit for a ballast tank
4.1Exposure to noise and vibration4.2Chemicals on board4.3Air quality and ventilation4.4Medical care on board4.5Food hygiene and drinking water4.6Crew wellbeing4.7Pollution prevention4.8Waste management4.9Operational energy efficiency4.10Case study: chemical exposure in the engine room
5.1Reporting incidents and near misses5.2Root cause investigation5.3Safety observations5.4Internal HSE audits5.5SIRE 2.0 vetting inspections5.6Management review5.7Training and competence5.8Safety campaigns5.9Fleet benchmarking5.10Practical: near-miss trends
6.1Study vessel6.2Initial HSE diagnosis6.3Risk register6.4Critical operations procedures6.5Training plan6.6Vessel HSE indicators6.7Audit programme6.8Improvement plan6.9Report and presentation6.10Final review with the tutor
How you'll learn
100 % online training on the SEIUM campus, with downloadable material, recorded classes and a dedicated technical tutor. No fixed timetable: students progress at their own pace within the intake, making it possible to combine with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Helm CONNECT, DNV Synergi Life, Intelex, SafetyCulture, in free, academic or evaluation versions. Case studies are based on real risk assessment procedures for high-risk shipboard work, fleet incident trend analysis and preparation for vetting inspections. Assessment is continuous, module by module, plus the final integrating project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Understand the HSE approach and safety culture on board ship.
Assess task and operational risks using structured methods.
Control high-risk work through permits to work.
Manage occupational health and crew wellbeing.
Integrate pollution prevention into day-to-day management.
Where this takes you
Requirements
- No prior qualification is required.
- Internet connection and a computer capable of running the programme software.
- Sufficient command of Spanish to follow technical regulatory texts.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme comprises 300 hours in total, spread over 3 to 5 months. That averages between 10 and 15 hours per week, compatible with a full-time job.
You will work with Helm CONNECT, DNV Synergi Life, Intelex, SafetyCulture. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
SEIUM's own diploma upon passing the continuous assessment and the integrating project. It is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or postgraduate diploma in the same area can be credited towards the advanced programme. Please check the credit transfer policy when you enrol.
Related programmes
Course in Hull and Machinery Inspection and Certification
Online 300-hour Course in hull and machinery inspection and certification. 6 modules covering the SOLAS Convention, Chapters I and II-1, the IMO Harmonised System of Survey…
Course in Hydrodynamics of Hydrofoils (Foils)
Online 300 h course in hydrodynamics of hydrofoils (foils). 6 modules with HSC Code 2000, the International Code of Safety for High-Speed Craft, DNV-RU-HSLC Rules for…
International MARPOL Regulations Course
Online 300-hour course in international MARPOL regulations. 6 modules covering the MARPOL 73/78 Convention and its six annexes, the 2008 NOx Technical Code (IMO) and IMO…
More in Naval, Offshore & Sports Nautical
All Naval, Offshore & Sports Nautical programmes → · How to apply · Fees & financing · Scholarships