Course in Cover for the Transport of Chemical Substances
Online 300-hour course in cover for the transport of chemical substances. 6 modules covering ADR (European Agreement concerning the International Carriage of Dangerous Goods by Road), Directive 2008/68/EC (inland transport of dangerous goods) and ALOHA (CAMEO). Assigned tutor and open enrolment.
Course in Cover for the Transport of Chemical Substances — studying from the United Kingdom
Insurance and risk analysis are important sectors in the United Kingdom, with London's market, the City of London and Edinburgh's financial services hub employing large numbers of actuaries, risk analysts and data specialists. Engineering knowledge is increasingly valuable in assessing risk for vehicles, infrastructure, energy and emerging technologies. Insurers and reinsurers use modelling, catastrophe analysis and telematics data. Regulation by the Prudential Regulation Authority and the Financial Conduct Authority shapes professional practice in this area.
Fees for the United Kingdom: £664 (Pound sterling), with instalments and employer sponsorship available.
Relevant bodies in the United Kingdom
Typical roles
Questions from the United Kingdom
Which UK bodies relate to actuarial and risk qualifications, and does SEIUM's training count towards their exams?
In the UK, actuarial professional status is governed by the Institute and Faculty of Actuaries, which runs its own examinations and accreditation. SEIUM's training is not accredited by the IFoA or any national body, and it does not confer exemptions from those exams unless the IFoA itself decides so. Confirm exemption policies directly with the IFoA before enrolling.
Do UK insurers and risk firms hire people with private online engineering or data qualifications?
UK insurers and risk consultancies recruit on the basis of skills, experience and recognised credentials. A private qualification may support an application where it demonstrates applied data or risk modelling, but employers decide its value case by case. Practical project work often carries more weight, so present your final project clearly on your CV and in interviews.
How much study time is needed, and can I pay for it in instalments while working in the UK?
Programmes range from 300 hours for specialist courses to 1,900 hours for master's programmes, all delivered online in English. You are assigned a technical tutor for support. Fees are payable in instalments, and employer sponsorship is possible. Plan weekly study hours realistically, as the total hours are substantial for a part-time learner.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Explain the general framework for the transport of dangerous goods.
Apply classification, documentation and operational control requirements.
Analyse accident scenarios and their consequences from a safety perspective.
Structure liability, damage and environmental insurance cover.
Coordinate emergency response and communication with authorities.
Promote continuous improvement through audits and lessons learned.
Develop an integrating project for an insurance programme for a chemical carrier.
Who it's for
- Safety adviser for the transport of dangerous goods who wishes to specialise in Cover for the Transport of Chemical Substances.
- Transport liability underwriter who wishes to specialise in Cover for the Transport of Chemical Substances.
- Risk manager at a chemical company who wishes to specialise in Cover for the Transport of Chemical Substances.
- Emergency technician who wishes to specialise in Cover for the Transport of Chemical Substances.
- Transport claims adjuster who wishes to specialise in Cover for the Transport of Chemical Substances.
- Health, safety and environment manager who wishes to specialise in Cover for the Transport of Chemical Substances.
- Engineering or science graduates seeking to enter the transport of dangerous goods sector.
What you'll work with
- ADR (European Agreement concerning the International Carriage of Dangerous Goods by Road)
- Directive 2008/68/EC (inland transport of dangerous goods)
- Regulation (EC) No 1272/2008 (CLP)
- RID (regulations for the rail transport of dangerous goods)
- IMDG Code (dangerous goods by sea)
- Royal Decree 97/2014 (road transport operations for dangerous goods)
- Royal Decree 1566/1999 (safety advisers)
6 modules · 300 h
1.1Classification of dangerous goods1.2Hazard classes and their characteristics1.3International agreements by mode of transport1.4Required transport documentation1.5Labelling, marking and placarding1.6Approved packaging1.7Sector vocabulary and acronyms1.8Actors and their obligations1.9Safety adviser1.10Exercise: classifying a consignment
2.1Loading, stowage and segregation2.2Limited and excepted quantities2.3Tanks and tank containers2.4Traffic restrictions and tunnels2.5Mandatory driver training2.6Vehicle and driver equipment2.7Roadside inspections2.8Temporary storage2.9Multimodal transport and transfers2.10Practice: consignment checklist
3.1Leak, spill and fire3.2Explosion and its effects3.3Toxic cloud and dispersion3.4Impact on the population and the environment3.5Domino effect at facilities3.6Consequence modelling for planning3.7Planning and alert zones3.8Emergency response times3.9Experience from documented accidents3.10Practice: analysis of an accident scenario
4.1Compulsory carrier insurance4.2Third-party liability for damage4.3Environmental liability4.4Cargo cover4.5Decontamination and removal costs4.6Limits and their adequacy4.7Common exclusions4.8Required prevention measures4.9Risk assessment by the insurer4.10Practice: designing an insurance programme
5.1Carrier emergency plan5.2Intervention cards and their use5.3Coordination with emergency services5.4Communication during an emergency5.5Accident waste management5.6Root cause investigation5.7Notification to authorities5.8Training and drills5.9Fleet safety indicators5.10Practice: an operator's emergency plan
6.1Choice of goods and route6.2Classification and applicable requirements6.3Analysis of accident scenarios6.4Prevention and operational plan6.5Design of the insurance programme6.6Emergency and response plan6.7Monitoring indicators6.8Training plan6.9Project report6.10Project defence
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: students progress at their own pace within the intake, which makes it possible to combine the course with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is ALOHA (CAMEO), advanced Excel, QGIS, Power BI, in free, academic or evaluation versions. Practical work covers real procedures for analysing accident scenarios involving chemical substances, ADR compliance audits and documentary emergency drills. Assessment is continuous by module, plus the final integrating project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Explain the general framework for the transport of dangerous goods.
Apply classification, documentation and operational control requirements.
Analyse accident scenarios and their consequences from a safety perspective.
Structure liability, damage and environmental insurance cover.
Coordinate emergency response and communication with authorities.
Where this takes you
Requirements
- No prior degree is required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient command of Spanish to follow technical regulatory texts.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme comprises 300 hours in total, spread over 3 to 5 months. That is an average of 10 to 15 hours per week, compatible with a full-time job.
The course works with ALOHA (CAMEO), advanced Excel, QGIS and Power BI. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
An SEIUM own diploma upon passing the continuous assessment and the integrating project. It is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or postgraduate diploma in the same area are credited towards the higher-level programme. Please check the credit transfer policy when you enrol.
Related programmes
Interruption by Natural Perils Insurance Course
Online 300-hour course in business interruption insurance for natural perils. 6 Modules Covering Royal Legislative Decree 7/2004 Moody's RMS RiskLink. Assigned tutor and open enrollment.
Course in Chatbots for Mobility Insurance
Online 300-hour course in chatbots for mobility insurance. 6 modules covering Regulation (EU) 2024/1689 (AI Act), Regulation (EU) 2016/679 (GDPR) and Rasa. Assigned tutor and enrolment…
Course in Microinsurance Applied to Urban Transport
Online 300-hour course in microinsurance applied to urban transport. 6 modules covering the IAIS Application Paper on Inclusive Insurance (2012), Directive (EU) 2016/97 on insurance distribution…
More in Insurance, Risk & Actuarial Data
All Insurance, Risk & Actuarial Data programmes → · How to apply · Fees & financing · Scholarships