Master’s in Islands and Isolated Systems
Online master's programme of 1,900 hours in islands and isolated power systems, 12 modules covering conventional island generation, renewable integration, low-inertia stability, storage, microgrids, island energy planning, operation, demand management, regulation and economics, with an assigned technical tutor.
Master’s in Islands and Isolated Systems — studying from Singapore
Singapore's energy system is largely based on natural gas, supplemented by growing investment in solar, energy storage and grid modernisation. The Energy Market Authority regulates the electricity and gas markets and oversees network reliability, while SP Group operates the national grid. Engineers work on power systems, distribution networks, energy efficiency and resilience planning. The sector also supports regional energy trading and the petrochemical cluster on Jurong Island.
Fees for Singapore: S$12,700 (Singapore dollar), with instalments and employer sponsorship available.
Relevant bodies in Singapore
Typical roles
Questions from Singapore
Which Singapore bodies regulate energy and utility networks, and is SEIUM recognised?
Singapore's energy sector is regulated by the Energy Market Authority (EMA), and power and water networks involve SP Group and PUB, the national water agency. Engineers may register with the Professional Engineers Board (PEB). SEIUM's qualifications are private, not state degrees, and not accredited by any national body, so recognition is for employers or the relevant body to decide.
Which employers in Singapore hire energy and network engineers?
Main employers include SP Group, PUB, EMA-regulated energy companies, engineering consultancies, and industrial firms managing power systems. Singapore's grid modernisation and renewable projects also create roles. Employers typically look for professional registration and practical network experience. Your final project may help, but it does not guarantee a position.
Is this workable alongside a job, and what support is provided?
The course is fully online and taught in English, with an assigned technical tutor for guidance. Workload is significant: 1,900 hours for a master's, 800 for a postgraduate diploma and 300 for a specialist course. Fees are payable in instalments, and employer sponsorship is possible, depending on your employer's training policy.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Analyse the characteristics of isolated power systems.
Integrate renewables into island systems.
Assess the stability of low-inertia systems.
Size storage for isolated systems.
Design microgrids for remote areas.
Plan the island energy transition.
Evaluate the regulation and economics of isolated systems.
Who it's for
- Isolated systems engineers.
- Island energy planners.
- Microgrid engineers.
- Island system operators.
- Energy transition consultants.
- Rural electrification engineers.
- Engineering or science graduates looking to work for island system operators.
What you'll work with
- Royal Decree 738/2015 (Spanish non-mainland electricity systems)
- Regulation (EU) 2016/631 (RfG) (grid connection requirements for generators)
- IEEE 2030.7 (microgrid controller specification)
- IEEE 2030.8 (microgrid controller testing)
- IEC TS 62898-1 (microgrid planning and specification)
- Law 24/2013 (Spanish Electricity Sector Act)
- IEC 62257 (renewable and hybrid systems for rural electrification)
- HOMER Pro
- DIgSILENT PowerFactory
- PLEXOS
- MATLAB/Simulink
- PyPSA
12 modules
1.1Characteristics of island systems1.2Non-mainland systems in Spain1.3Microgrids in remote areas1.4Dependence on fossil fuels1.5Island generation costs1.6Stability challenges1.7Regulation of isolated systems1.8Interconnections between islands1.9Leading international experiences1.10Case study: power system of a Canary island
2.1Diesel generator sets and engines2.2Gas turbines2.3Island combined cycles2.4Economic dispatch of units2.5Sizing operating reserves2.6Start-ups and shutdowns2.7Alternative fuels for engines2.8Emissions and regulations2.9Fuel management2.10Lab: economic dispatch of an island system
3.1Island renewable resources3.2Distributed rooftop PV3.3Wind power on islands3.4Hydropower and pumped storage3.5Island geothermal resources3.6Wave and tidal current energy3.7Penetration limits3.8Curtailment and constraints3.9Renewable planning3.10Practical: renewable penetration scenario
4.1Low system inertia4.2Frequency stability4.3Voltage stability4.4Load shedding4.5Fast frequency response4.6Synchronous condensers for inertia4.7Storage for stability4.8Grid-forming on islands4.9System dynamic studies4.10Lab: frequency response to loss of a unit
5.1Large-scale batteries5.2Pumped storage plants5.3Flywheels5.4Hydrogen for storage5.5Molten salt thermal storage5.6Storage sizing5.7Storage services5.8The El Hierro and Gorona del Viento cases5.9Storage economics5.10Practical: battery sizing for an island
6.1Microgrid architectures6.2Hybrid diesel-renewable microgrids6.3Hierarchical microgrid control6.4Primary and secondary control6.5Microgrid energy management6.6Rural electrification with renewables6.7Solar home systems6.8Isolated community mini-grids6.9Maintenance in remote areas6.10Lab: droop control of a microgrid
7.1Demand forecasting7.2Decarbonisation scenarios7.3Expansion optimisation7.4Planning models7.5Subsea interconnections between islands7.6Transport electrification7.7Desalination and energy7.8Tourism and demand7.9Island transition plans7.10Practical: planning with HOMER Pro
8.1Island control centre8.2Renewable forecasting8.3Unit commitment8.4Reserve management8.5Curtailment management8.6Operation with high penetration8.7Emergency procedures8.8Service restoration8.9Operating indicators8.10Case study: operation with 80% renewables
9.1Demand flexibility9.2Desalination as a flexible load9.3Electric vehicle charging9.4Heat pumps9.5Load aggregation9.6Dynamic tariffs for consumers9.7Demand response9.8Consumer programmes9.9Flexibility assessment9.10Workshop: flexibility of a desalination plant
10.1Remuneration regime for isolated systems10.2Compensation of non-mainland costs10.3Generation costs10.4Island renewable auctions10.5Clean Energy for EU Islands initiative10.6Project financing10.7Ownership models10.8Cost-benefit analysis of investments10.9Consumer prices10.10Practical: generation cost of an island system
11.1Islands as living laboratories11.2Island energy communities11.3Island electric mobility11.4Water and energy management11.5Sustainable tourism and energy11.6System digitalisation11.7Citizen participation in the transition11.8Resilience to climate change11.9Island roadmaps11.10Case study: 100% renewable roadmap
12.1Selecting the isolated system12.2Analysis of the current situation12.3Resource assessment12.4Transition scenarios12.5Stability studies12.6Storage design12.7Economic assessment of scenarios12.8Roadmap12.9Master's Thesis report12.10Master's Thesis: defence before a panel
How you'll learn
The programme is delivered 100% online on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so it fits around your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is HOMER Pro, DIgSILENT PowerFactory, PLEXOS, MATLAB/Simulink and PyPSA, in free, academic or evaluation versions. Testing is studied on real procedures for dynamic frequency studies, transition scenario simulation and microgrid control testing. Assessment is continuous by module plus the final Master's Thesis.
Standards covered: Royal Decree 738/2015, Regulation (EU) 2016/631 (RfG), IEEE 2030.7, IEEE 2030.8, IEC TS 62898-1, Law 24/2013, IEC 62257.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- University degree in engineering, science or architecture, or equivalent demonstrable professional experience.
- Internet connection and a computer able to run the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 1,900 hours over 12–14 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with HOMER Pro, DIgSILENT PowerFactory, PLEXOS, MATLAB/Simulink and PyPSA, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the Master's Thesis. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed in a course or postgraduate diploma in the same area are recognised in the higher programme. Ask about the recognition policy when you enrol.
A university degree in engineering, science or architecture (or equivalent professional experience), a computer able to run the software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Master’s in Financial Structuring of Energy Projects
Online master's programme of 1,900 hours in financial structuring of energy projects, with 12 modules covering project finance, financial modelling, valuation metrics, debt structuring, funding sources,…
Master’s in FACTS Engineering and Power Flow Control
Online master's programme of 1,900 hours in FACTS and power flow control engineering. 12 modules covering shunt and series compensation, UPFC and combined controllers, FACTS modelling,…
Master’s in Energy Engineering for Buildings, Campuses & Cities
Online master's programme of 1,900 hours in energy engineering for buildings, campuses and cities: 12 modules covering building physics, efficient thermal installations, energy management, renewables, district…
More in Energy and Networks
All Energy and Networks programmes → · How to apply · Fees & financing · Scholarships