Diploma in Urban Regulations and PMV Homologation
Online postgraduate diploma of 800 hours in urban regulations and type approval of personal mobility vehicles (PMVs): 8 modules covering the legal framework of micromobility, the DGT PMV technical manual, L-category type approval, certification testing, municipal by-laws, road safety and market surveillance, with an assigned technical tutor.
Diploma in Urban Regulations and PMV Homologation — studying from Singapore
Singapore's product design sector serves consumer electronics, medical devices, industrial equipment and digital services, with strong demand for user experience and interface design. The Singapore University of Technology and Design runs design-focused programmes, and the Design Singapore Council promotes design capability across industries. Engineers working in human-machine interface design combine usability research with embedded and software development. Employers include multinational product companies, technology start-ups and design consultancies.
Fees for Singapore: S$2,560 (Singapore dollar), with instalments and employer sponsorship available.
Relevant bodies in Singapore
Typical roles
Questions from Singapore
Is product or HMI design a regulated profession in Singapore, and is SEIUM recognised?
Product and HMI design is not a licensed profession in Singapore, so there is no statutory registration. Relevant bodies include the Singapore Institute of Architects for some design work and the Design Singapore Council for industry promotion. SEIUM's qualifications are private, not state degrees, and not accredited by any national body, so recognition is decided by employers.
Which Singapore employers hire HMI and product design engineers?
Opportunities exist with electronics and medical device firms, consumer product companies, software houses, and automotive and industrial suppliers. Singapore's manufacturing and healthtech sectors are notable employers. Hiring managers usually look closely at design portfolios and user research work. Your final project can strengthen your portfolio, though employers judge it on their own terms.
Can I study this alongside work from Singapore, and what are the payment options?
Yes, all programmes are online and taught in English, so you can study from Singapore without a student visa and fit lessons around work. The workload is significant, with 1,900 hours for a master's, 800 for a postgraduate diploma and 300 for a specialist course. Fees can be paid in instalments, and employer sponsorship is possible.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Distinguish the legal regimes for PMVs, pedal-assisted bicycles and L-category vehicles.
Apply the technical requirements of the DGT PMV characteristics manual.
Plan the type approval of light L-category vehicles.
Organise technical certification tests with laboratories.
Analyse municipal by-laws and licence conditions for shared services.
Assess micromobility road safety in urban environments.
Prepare conformity and market surveillance files.
Who it's for
- Vehicle type-approval engineers
- Urban mobility technicians
- Regulatory compliance managers
- Micromobility consultants
- Market surveillance inspectors
- PMV product managers
- Engineering or science graduates looking to enter micromobility
What you'll work with
- Royal Decree 970/2020 (Spanish rules on personal mobility vehicles)
- DGT Personal Mobility Vehicle Characteristics Manual (technical requirements and certification of PMVs)
- Regulation (EU) 168/2013 (approval of two- or three-wheel vehicles and quadricycles)
- EN 17128 (light motorised vehicles for personal transport)
- Delegated Regulation (EU) 3/2014 (vehicle functional safety requirements for L-category vehicles)
- Royal Legislative Decree 6/2015 (consolidated Spanish Traffic Act)
- Regulation (EU) 2019/1020 (market surveillance and product compliance)
- Regulation (EU) 2023/1542 (batteries and waste batteries)
- QGIS
- PTV Vissim
- Aimsun Next
- Power BI
8 modules
1.1Definition of PMV and differences from the moped1.2Exclusions from Regulation (EU) 168/20131.3Royal Decree 970/2020 and its changes1.4Consolidated text of the Spanish Traffic Act1.5National and municipal competences1.6Rules for pedal-assisted bicycles1.7Civil liability and insurance1.8Comparison with France, Germany and the United Kingdom1.9Regulatory developments in the European Union1.10Workshop: legal classification of five vehicles
2.1Structure of the DGT manual2.2Maximum speed and power requirements2.3Braking, lighting and audible warning device2.4Mass, dimensions and stability2.5Vehicle identification and marking2.6Certificate of circulation2.7Certification bodies and laboratories2.8Application deadlines and transition period2.9Instruction manual and user information2.10Practical exercise: conformity checklist for an e-scooter
3.1Categories L1e to L7e3.2Delegated Regulation (EU) 3/2014 on functional safety3.3Environmental and propulsion requirements3.4EU type-approval procedure3.5Conformity of production3.6Vehicle certificate of conformity3.7Individual approval and small series3.8Braking and maximum speed tests3.9Vehicle modifications and their processing3.10Case study: type-approval route for an L1e vehicle
4.1Braking on dry and wet surfaces4.2Stability and ramp tests4.3Maximum speed and electronic limitation4.4Structural strength and fatigue4.5Electrical safety of the battery4.6Electromagnetic compatibility of the vehicle4.7Lighting and retro-reflectors4.8Protection against tampering with the limiter4.9Technical test report4.10Laboratory: braking distance measurement
5.1Models of mobility by-laws5.2Riding on the carriageway, cycle lanes and pavements5.3Low-emission zones and micromobility5.4Licences for shared services5.5On-street parking of fleets5.6Minimum age, helmets and alcohol limits5.7Municipal penalty regime5.8PMV access to public transport5.9Mobility data with the MDS standard5.10Workshop: technical conditions for a shared-service licence
6.1PMV accident rates in DGT statistics6.2Design of segregated cycle lanes6.3Interaction with pedestrians and vehicles6.4Micromobility-specific signage6.5Hazardous surfaces and obstacles6.6Traffic calming and shared-space speeds6.7Training and awareness campaigns6.8Road safety audits6.9Safety monitoring indicators6.10Case study: audit of an urban corridor
7.1Obligations of manufacturers, importers and distributors7.2Regulation (EU) 2019/1020 on market surveillance7.3CE marking and machinery legislation7.4Non-compliant products and recalls7.5Regulation (EU) 2023/1542 on batteries7.6Responsibilities in e-commerce7.7Technical documentation and traceability7.8On-street checks and inspections7.9Handling of user complaints7.10Case study: file on a non-compliant e-scooter
8.1Selection of the vehicle and its category8.2Analysis of the applicable regulations8.3Certification strategy8.4Test and laboratory matrix8.5Technical documentation for the file8.6Adaptation to local by-laws8.7Process schedule and costs8.8Post-market surveillance plan8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable materials, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within the intake, so you can combine the programme with work.
Each module combines theory, guided reading of the original regulations and applied exercises. The working software is QGIS, PTV Vissim, Aimsun Next and Power BI, in free, academic or evaluation versions. Procedures are studied on real cases: processing PMV certificates of circulation, braking and speed tests on track, and analysis of urban mobility by-laws. Assessment is continuous for each module, plus the final project.
Standards covered: Royal Decree 970/2020, DGT Personal Mobility Vehicle Characteristics Manual, Regulation (EU) 168/2013, EN 17128, Delegated Regulation (EU) 3/2014, Royal Legislative Decree 6/2015, Regulation (EU) 2019/1020, Regulation (EU) 2023/1542.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- Internet connection and a computer able to run the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with QGIS, PTV Vissim, Aimsun Next and Power BI, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software, and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in PLM Integration with CAD/CAE and Release Management
Online postgraduate diploma of 800 hours in PLM integration with CAD/CAE and release management: 8 modules covering PLM architecture, CAD and CAE integration, release processes, change…
Diploma in Physical Controls: Grips, Knobs and Usability with Gloves
Online postgraduate diploma of 800 hours in Physical Controls: Grips, Knobs and Usability with Gloves. 8 modules covering hand ergonomics and anthropometry, physical control types, grip…
Diploma in GD&T and Variation Control for Indoor/Outdoor
Online postgraduate diploma of 800 hours in GD&T and variation control for interior and exterior: 8 modules covering the GD&T language to ISO 1101 and ASME…
More in Design, HMI & Product
All Design, HMI & Product programmes → · How to apply · Fees & financing · Scholarships