Diploma in Timber Selection, Drying and Stabilisation
Online postgraduate diploma of 800 hours in timber selection, drying and stabilisation for classic vehicle bodywork, structured in 8 modules covering wood anatomy, timber selection, moisture in wood, drying, stabilisation and treatments, laminating and bending, and conservation of timber in vehicles, with an assigned technical tutor.
Diploma in Timber Selection, Drying and Stabilisation — studying from Singapore
Singapore's restoration and classic vehicle community is small but active, centred on vintage cars, motorcycles and collectable machinery. Restoration work demands skills in mechanical repair, fabrication and historic materials, often sourced regionally. Vehicle registration and modification are governed by the Land Transport Authority, which applies particular rules to older vehicles. Employers include specialist workshops, collectors' garages and vehicle import and export businesses.
Fees for Singapore: S$2,130 (Singapore dollar), with instalments and employer sponsorship available.
Relevant bodies in Singapore
Typical roles
Questions from Singapore
Will this qualification be recognised by professional bodies in Singapore?
SEIUM's qualifications are private, not official state degrees, and are not accredited by any national body in Singapore. Restoration work in Singapore is generally judged on craftsmanship and reputation rather than a single licensing body, and Professional Engineer registration is handled by the Professional Engineers Board. Recognition of a private qualification is decided by employers or the relevant body.
How might this training be used by employers in Singapore?
Singapore's classic vehicle market is relatively small, so opportunities are likely to be limited to specialist workshops, collectors, dealers or independent consultancy. An online qualification may help you structure your technical knowledge but does not guarantee work. Clients and employers usually rely heavily on hands-on track record.
Can I study this alongside a full-time job, and can my employer help fund it?
The programme is fully online and in English, so you can study from home in Singapore with no student visa needed. Workload varies from 300 to 1,900 hours, so plan around your schedule. Fees can be paid in instalments, and employer sponsorship is possible, though this is less common for self-employed or small workshop owners.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Identify timber species and their properties for bodywork.
Select timber using quality and traceability criteria.
Measure and control the moisture content of timber.
Apply drying schedules without defects.
Stabilise and treat timber to improve its durability.
Manufacture curved parts by laminating and bending.
Diagnose and conserve timber elements in vehicles.
Who it's for
- Coachbuilding cabinetmakers working on timber-framed bodies.
- Wood technology technicians.
- Classic vehicle restorers.
- Drying kiln managers.
- Quality technicians in joinery.
- Carpenters specialising in composite wood-and-metal bodies.
- Engineering or science graduates looking to enter classic vehicle restoration.
What you'll work with
- EN 13183-1 (moisture content by the oven-dry method)
- EN 13183-2 (moisture content estimated by electrical resistance)
- EN 350 (durability of wood)
- EN 14081-1 (strength grading of structural timber)
- Regulation (EU) 995/2010 (EU Timber Regulation)
- EN 335 (use classes)
- FIVA Turin Charter (conservation of historic vehicles)
- Woodworks Design
- SketchUp
- Fusion 360
- WoodCalc
- Excel (moisture tracking)
8 modules
1.1Cellular structure of hardwoods and softwoods1.2Sapwood, heartwood and growth rings1.3Density and mechanical properties1.4Anisotropy and cutting directions1.5Natural defects: knots, checks and interlocked grain1.6Natural durability against fungi and insects1.7Macroscopic species identification1.8Traditional coachbuilding timbers: ash, oak and beech1.9Interior timbers: walnut, mahogany and burr1.10Lab: species identification with a hand lens
2.1Visual grading by quality2.2Structural grading standards2.3Choosing boards for curved parts2.4Grain orientation according to function2.5Suppliers and FSC and PEFC certification2.6EU Timber Regulation2.7Calculating yield and waste2.8Storage in the workshop2.9Batch traceability2.10Practical: selecting ash for a body frame
3.1Equilibrium moisture content3.2Fibre saturation point3.3Tangential, radial and longitudinal shrinkage3.4Measuring moisture with a moisture meter3.5Measurement by the oven-dry method3.6Variations according to climate and vehicle use3.7Effect of moisture on joints3.8Hygroscopicity of veneers and plywood3.9Calculating dimensional changes3.10Lab: moisture measurement by double weighing
4.1Natural air drying and stacking4.2Conventional drying kilns4.3Heat-pump and vacuum drying4.4Drying schedules by species4.5Drying defects: checks, warping and collapse4.6Conditioning and stress relief4.7Drying quality control4.8Drying costs and times4.9Drying parts salvaged from vehicles4.10Practical: monitoring a drying schedule
5.1Thermal stabilisation and thermally modified timber5.2Impregnation with resins and consolidants5.3Oil and wax treatments5.4Protection against fungi and insects5.5Consolidation of degraded timber5.6Conservation-compatible products5.7Safety in the use of chemical products5.8Treatments for structural bodywork parts5.9Assessing treatment effectiveness5.10Workshop: consolidating a deteriorated frame member
6.1Steam bending and formers6.2Glued layer lamination6.3Structural wood adhesives6.4Controlling springback6.5Manufacturing curved bodywork parts6.6Plywood and engineered panels6.7Traditional joints: mortise and tenon6.8Metal fittings and fixings6.9Dimensional control of bent parts6.10Practical: laminating a roof bow
7.1Diagnosing timber body frames7.2Partial replacement versus reconstruction7.3Documenting original parts7.4Preventing moisture in composite bodies7.5Ventilation and drainage7.6Galvanic corrosion at wood–metal joints7.7Periodic maintenance of timber parts7.8FIVA conservation criteria7.9Storing vehicles with timber components7.10Case study: diagnosing a shooting brake
8.1Selecting the part or assembly8.2Selecting species and grade8.3Drying and conditioning plan8.4Stabilisation plan8.5Manufacturing process8.6Quality control8.7Documenting the intervention8.8Budget for materials and workshop hours8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
A 100% online programme on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so it fits around your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Woodworks Design, SketchUp, Fusion 360, WoodCalc and an Excel moisture-tracking workbook, in free, academic or evaluation versions. Testing is studied through real procedures: moisture measurement by double weighing and moisture meter, kiln drying schedules, and laminating curved bodywork parts. Assessment is continuous by module, plus the final project.
Standards covered: EN 13183-1, EN 13183-2, EN 350, EN 14081-1, Regulation (EU) 995/2010, EN 335, FIVA Turin Charter.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with Woodworks Design, SketchUp, Fusion 360, WoodCalc and Excel, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector; no university degree is required.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Extreme Heat and Altitude Adaptation
Online postgraduate diploma of 800 hours in extreme heat and altitude adaptation of machinery. 8 modules covering extreme operating environments, engines at altitude, thermal management, dust…
Diploma in Import/Export, Tariffs and Customs Procedures
Online postgraduate diploma of 800 hours in Import/Export, Tariffs and Customs Procedures. 8 modules covering tariff classification, origin and customs value, duties and taxes, customs procedures,…
Postgraduate Diploma in Paint Stratigraphy and Materials Forensics
800-hour online Postgraduate Diploma in Paint Stratigraphy and Materials Forensics. 8 modules with ASTM E1610 (forensic paint analysis), ASTM E2937 (IR spectroscopy in forensic paints) and…
More in Restoration & Classics
All Restoration & Classics programmes → · How to apply · Fees & financing · Scholarships