Diploma in Takt Planning and Continuous Flow
Online postgraduate diploma of 800 hours in takt planning and continuous flow. 8 modules covering takt fundamentals, site analysis for takt, takt plan design, flow control and stability, logistics and material flow, queueing theory and simulation, and takt in infrastructure and industrialised construction, with ISO 21502, ISO 18404 and ISO 10006, with an assigned technical tutor.
Diploma in Takt Planning and Continuous Flow — studying from Singapore
Singapore is widely studied for its urban planning and infrastructure delivery, with ongoing investment in the Mass Rapid Transit network, the Thomson-East Coast Line, and large-scale water and coastal protection projects. The Land Transport Authority, the Housing and Development Board and the Public Utilities Board shape much of the work. Smart city initiatives such as Smart Nation are central to the sector. Typical employers include government agencies, major contractors and consultancies such as Surbana Jurong and Arup in the region.
Fees for Singapore: S$2,560 (Singapore dollar), with instalments and employer sponsorship available.
Relevant bodies in Singapore
Typical roles
Questions from Singapore
How are civil and rail engineers registered in Singapore, and does SEIUM's qualification count?
In Singapore, civil and structural engineers can register as Professional Engineers with the Professional Engineers Board (PEB) under the Professional Engineers Act, and the Building and Construction Authority (BCA) regulates the built environment. Rail is overseen by the Land Transport Authority (LTA). SEIUM's qualifications are private, not state degrees, and not accredited by any national body, so recognition is for employers or the relevant body to decide.
Which Singapore employers hire civil, rail and smart city engineers?
Key employers include the LTA, Public Utilities Board, JTC, the Housing and Development Board, consultancies, and contractors working on MRT and urban projects. Singapore's smart nation agenda also creates demand for smart city specialists. Employers usually prioritise registered qualifications and project experience. Your SEIUM final project may support your case, but it is not a guaranteed route into these roles.
Is the course realistic while working, and what language support is available?
Everything is taught online in English, and you are assigned a technical tutor for support. The programmes are demanding, with 1,900 hours for a master's, 800 for a postgraduate diploma and 300 for a specialist course, so plan your time well. Fees are payable in instalments, and employer sponsorship is possible, depending on your company.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand the principles of continuous flow and takt time.
Zone construction projects and balance workloads.
Design takt trains with suitable buffers.
Control the stability of the production flow on a daily basis.
Synchronise site logistics with the takt rhythm.
Apply queueing theory and simulation to flow analysis.
Adapt takt to infrastructure and industrialised construction.
Who it's for
- Takt planners.
- Production managers on building projects.
- Lean Construction consultants.
- Site logistics managers.
- Site managers working on repetitive or industrialised projects.
- Construction process engineers.
- Engineering or science graduates looking to move into residential construction.
What you'll work with
- ISO 21502:2020 (project management)
- ISO 18404:2015 (Lean and Six Sigma)
- ISO 10006:2017 (quality management in projects)
- ISO 22400-2:2014 (KPIs for manufacturing operations management)
- UNE-EN ISO 9001:2015 (quality management systems)
- ISO 21511:2018 (work breakdown structures)
- Takt.ing
- Vico Office
- AnyLogic
- Synchro 4D
- Microsoft Excel
8 modules
1.1Origins of takt in manufacturing1.2Takt time and production rhythm1.3Differences from CPM and line of balance1.4Continuous flow and stability1.5Variability and buffers1.6Takt in repetitive building projects1.7Takt in non-repetitive projects1.8Benefits and limitations1.9Reference cases in Europe1.10Case study: analysis of a project planned with takt
2.1Zoning into takt areas2.2Identifying work packages2.3Trade sequence2.4Calculating workloads2.5Balancing workloads between zones2.6Determining the takt time2.7Work trains and wagons2.8Buffer areas2.9Validation with the teams2.10Workshop: zoning an office building
3.1Building the takt train3.2Flow diagrams and the takt matrix3.3Takt float and buffers3.4Integrating contractual milestones3.5Structural phase versus finishes3.6Resources and crews per wagon3.7Logistics synchronised with takt3.8Visualising the plan3.9Simulating alternatives3.10Practical: takt plan for interior finishes
4.1Daily takt meetings4.2Takt boards and visual management4.3Progress control by zone4.4Early detection of deviations4.5Recovery strategies4.6Managing disruptions4.7Takt compliance indicators4.8Problem escalation4.9Improving the rhythm4.10Case study: recovering a delayed wagon
5.1Synchronised site logistics5.2Just-in-time deliveries5.3Material kits by zone5.4Storage and stockpiles5.5Access and crane control5.6Waste management in flow5.7Suppliers and logistics contracts5.8Digital logistics platforms5.9Delivery logistics indicators5.10Workshop: logistics plan for a takt-planned building
6.1Little's law and work in progress6.2Variability and waiting times6.3Bottlenecks6.4Discrete-event simulation6.5Monte Carlo simulation of flow6.6Sensitivity analysis6.7Production models in construction6.8Batch size optimisation6.9Interpreting results6.10Lab: simulation of a takt train
7.1Takt in linear works7.2Repetitive cycles in tunnels7.3Takt in prefabrication7.4Volumetric modular construction7.5Integration with 4D BIM7.6Planning building services7.7Takt in refurbishment7.8Takt coordination across several projects7.9Scalability of the method7.10Case study: takt in industrialised housing
8.1Analysis of the works8.2Zoning and packages8.3Calculating the takt time8.4Designing the takt train8.5Synchronised logistics plan8.6Daily control system8.7Scenario simulation8.8Implementation plan8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetables: you progress at your own pace within the intake, making it compatible with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Takt.ing, Vico Office, AnyLogic, Synchro 4D and Microsoft Excel, in free, academic or evaluation versions. Real procedures are studied: zoning and takt time calculation for an office building, simulation of a takt train with variability, and a just-in-time logistics plan for finishes. Assessment is continuous by module, plus the final capstone project.
Standards covered: ISO 21502:2020, ISO 18404:2015, ISO 10006:2017, ISO 22400-2:2014, UNE-EN ISO 9001:2015 and ISO 21511:2018.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with Takt.ing, Vico Office, AnyLogic, Synchro 4D and Microsoft Excel, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software, and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Postgraduate Diploma in Rail Welding, Switches and Maintenance
Online Postgraduate Diploma of 800 hours in Rail Welding, Switches and Maintenance. 8 modules covering EN 13674-1 (Vignole rails), EN 14730-1 (aluminothermic rail welding) and AutoCAD.…
Postgraduate Diploma in Plant Design and Odour Control
Online 800-hour Postgraduate Diploma in Plant Design and Odour Control. 8 modules covering EN 13725 (determination of odour concentration by dynamic olfactometry), EN 16841-1 (field odour…
Diploma in Risk Analysis and Monte Carlo in Planning
Online postgraduate diploma of 800 hours in risk analysis and Monte Carlo simulation in planning. 8 modules covering uncertainty in planning, project risk management, statistics for…
More in Civil, Rail & Smart Cities
All Civil, Rail & Smart Cities programmes → · How to apply · Fees & financing · Scholarships