Diploma in Seat Design: Foams, Structures and Comfort Mapping
Online postgraduate diploma of 800 hours in seat design: foams, structures and comfort mapping: 8 modules covering seated posture biomechanics, seat structures, foams and comfort materials, comfort mapping, seat safety, active comfort functions and seat development and validation, with an assigned technical tutor.
Diploma in Seat Design: Foams, Structures and Comfort Mapping — studying from Singapore
Singapore's product design sector serves consumer electronics, medical devices, industrial equipment and digital services, with strong demand for user experience and interface design. The Singapore University of Technology and Design runs design-focused programmes, and the Design Singapore Council promotes design capability across industries. Engineers working in human-machine interface design combine usability research with embedded and software development. Employers include multinational product companies, technology start-ups and design consultancies.
Fees for Singapore: S$1,840 (Singapore dollar), with instalments and employer sponsorship available.
Relevant bodies in Singapore
Typical roles
Questions from Singapore
Is product or HMI design a regulated profession in Singapore, and is SEIUM recognised?
Product and HMI design is not a licensed profession in Singapore, so there is no statutory registration. Relevant bodies include the Singapore Institute of Architects for some design work and the Design Singapore Council for industry promotion. SEIUM's qualifications are private, not state degrees, and not accredited by any national body, so recognition is decided by employers.
Which Singapore employers hire HMI and product design engineers?
Opportunities exist with electronics and medical device firms, consumer product companies, software houses, and automotive and industrial suppliers. Singapore's manufacturing and healthtech sectors are notable employers. Hiring managers usually look closely at design portfolios and user research work. Your final project can strengthen your portfolio, though employers judge it on their own terms.
Can I study this alongside work from Singapore, and what are the payment options?
Yes, all programmes are online and taught in English, so you can study from Singapore without a student visa and fit lessons around work. The workload is significant, with 1,900 hours for a master's, 800 for a postgraduate diploma and 300 for a specialist course. Fees can be paid in instalments, and employer sponsorship is possible.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Analyse the biomechanics of the seated posture.
Design strong, lightweight seat structures.
Select foams and upholstery according to hardness and comfort.
Carry out comfort mapping with pressure maps.
Apply safety requirements for seats and head restraints.
Specify active comfort functions.
Plan seat validation and type approval.
Who it's for
- Seat engineers
- Occupant comfort specialists
- Interior materials engineers
- Passive safety engineers
- Interior designers
- Product validation engineers
- Engineering or science graduates looking to move into the automotive sector
What you'll work with
- UN ECE Regulation No. 17 (seats, anchorages and head restraints)
- UN ECE Regulation No. 14 (safety-belt anchorages and ISOFIX)
- ISO 2439:2008 (flexible foams: indentation hardness)
- ISO 10326-1 (evaluation of seat vibration)
- ISO 2631-1:1997 (human exposure to whole-body vibration)
- ISO 3386-1 (flexible foams: compression)
- UN ECE Regulation No. 25 (head restraints)
- Euro NCAP Whiplash Test Protocol
- RAMSIS
- XSENSOR
- LS-DYNA
- CATIA V5/3DEXPERIENCE
- Abaqus
8 modules
1.1Anatomy of the spine and pelvis1.2Seated posture and lumbar curvature1.3Pressure distribution1.4Comfort and discomfort: models1.5Fatigue on long journeys1.6Vibration transmitted to the body1.7Anthropometry for seats1.8Differences between populations1.9Comfort assessment methods1.10Workshop: postural analysis of a driver
2.1Seat architecture: cushion, backrest and head restraint2.2Steel and aluminium frames2.3Tracks, adjusters and mechanisms2.4Recliners and locks2.5Folding rear seats2.6Anchorages and their strength2.7Side airbag integration2.8Weight reduction and materials2.9Structural simulation of the frame2.10Practical: load analysis of a frame
3.1Moulded polyurethane foam3.2Density, hardness and indentation curve3.3Testing according to ISO 24393.4Hysteresis and recovery3.5Dual-hardness foams3.6Springs, suspensions and technical fabrics3.7Upholstery: fabric, leather and synthetics3.8Breathability and thermal performance3.9Sustainable and recycled materials3.10Lab: foam hardness characterisation
4.1Pressure maps with sensor mats4.2Peak pressure and distribution indices4.3Lumbar and lateral support zones4.4Correlation with subjective rating4.5Jury tests and percentiles4.6Dynamic comfort while driving4.7SEAT vibration transmissibility4.8Seat thermal comfort4.9Map visualisation and analysis4.10Case study: pressure map of a benchmark seat
5.1Strength of seats and anchorages5.2Head restraints and neck protection5.3Whiplash tests5.4Luggage retention5.5ISOFIX anchorages and top tether5.6Seat belt integration5.7Cushion anti-submarining ramps5.8Dynamic sled tests5.9Euro NCAP rear impact protocols5.10Workshop: head restraint geometry assessment
6.1Power adjustment and memory6.2Adjustable lumbar support and massage6.3Heating and ventilation6.4Seats for automated driving6.5Swivel and relaxation positions6.6Occupancy sensors6.7Seats for reduced mobility6.8Control integration6.9Mechanism noise6.10Practical: specification of a seat with massage
7.1Development process with the supplier7.2Seat technical specification7.3Prototypes and validation7.4Durability tests7.5Perceived quality tests7.6Target cost and weight7.7Manufacturing and assembly7.8Variant management7.9Type approval of the complete seat7.10Case study: validation plan for a front seat
8.1Defining requirements8.2Structure concept8.3Foam selection8.4Comfort analysis8.5Safety analysis8.6Active comfort functions8.7Validation plan8.8Seat weight and cost estimate8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so the programme fits around your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is RAMSIS, XSENSOR, LS-DYNA, CATIA V5/3DEXPERIENCE and Abaqus, in free, academic or evaluation versions. Testing is studied through real procedures for seat pressure mapping with participants, polyurethane foam characterisation, and head restraint geometry and whiplash assessment. Assessment is continuous by module, plus the final integration project.
Standards covered: UN ECE Regulation No. 17 (seats, anchorages and head restraints); UN ECE Regulation No. 14 (safety-belt anchorages and ISOFIX); ISO 2439:2008 (flexible foams: indentation hardness); ISO 10326-1 (evaluation of seat vibration); ISO 2631-1:1997 (human exposure to whole-body vibration); ISO 3386-1 (flexible foams: compression); UN ECE Regulation No. 25 (head restraints); Euro NCAP Whiplash Test Protocol.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with RAMSIS, XSENSOR, LS-DYNA, CATIA V5/3DEXPERIENCE and Abaqus, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software, and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Version Control, Traceability and Collaboration
Online postgraduate diploma of 800 hours in versioning, traceability and collaboration: 8 modules covering product data, revision control, requirements traceability, configuration management under ISO 10007, engineering…
Diploma in Haptic Actuators and Response Patterns
Online postgraduate diploma of 800 hours in Haptic Actuators and Response Patterns. 8 modules covering haptic perception, actuator technologies, haptic response patterns, in-vehicle haptics, technical integration,…
Diploma in Class A Surfaces: G3/G4 Continuity and Optical Quality
Online postgraduate diploma of 800 hours in Class A surfaces, G3/G4 continuity and optical quality, structured in 8 modules covering curve and surface geometry, geometric continuity,…
More in Design, HMI & Product
All Design, HMI & Product programmes → · How to apply · Fees & financing · Scholarships