Diploma in Post-Irradiation Examination (PIE)
Online postgraduate diploma of 800 hours in post-irradiation examination (PIE): 8 modules covering hot cell facilities, non-destructive and destructive examinations, fission gas analysis, in-cell mechanical testing, radiochemistry and the use of PIE data, with an assigned technical tutor.
Diploma in Post-Irradiation Examination (PIE) — studying from Singapore
Singapore maintains a comprehensive defence sector through the Ministry of Defence and the Defence Science and Technology Agency, which develops military technologies and manages procurement. Engineering work covers land systems, ammunition, command and control, and simulation. Industry partners include ST Engineering, which supplies defence and security systems globally. Engineers here work within strict security and export control frameworks, often combining systems integration with reliability and safety engineering.
Fees for Singapore: S$2,560 (Singapore dollar), with instalments and employer sponsorship available.
Relevant bodies in Singapore
Typical roles
Questions from Singapore
How does defence engineering work in Singapore, and which bodies oversee it?
Singapore's defence engineering is largely centred on the Ministry of Defence (MINDEF) and DSTA, the defence procurement and development agency, along with the Singapore Armed Forces. Engineers may register with the Professional Engineers Board (PEB). SEIUM's qualifications are private, not state degrees, and not accredited by any national body, so recognition for defence roles depends on the employer or relevant authority.
Who employs defence and land systems engineers in Singapore?
Main employers include MINDEF, DSTA, the SAF, and defence industry companies including ST Engineering. Access to many roles requires security clearance and citizenship or residency rules, so check eligibility early. Employers focus on proven competence and clearance status. Your final project can illustrate technical capability, but it does not replace these requirements.
Is the course manageable alongside a job, and can employers fund it?
The programme is fully online and taught in English, with an assigned technical tutor. Plan for a heavy workload: 1,900 hours for a master's, 800 for a postgraduate diploma, or 300 for a specialist course. Fees are payable in instalments, and employer sponsorship is possible, which is common in defence-linked organisations, though approval is up to them.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand the design and operation of hot cells.
Apply non-destructive examinations to irradiated fuel.
Analyse released fission gases.
Perform destructive and microstructural examinations.
Carry out mechanical tests remotely.
Determine burnup using radiochemical methods.
Make use of PIE data in validation and licensing.
Who it's for
- Hot cell technicians.
- Nuclear materials engineers.
- Radiochemists.
- Radiation protection specialists.
- Fuel researchers.
- Quality managers in nuclear laboratories.
- Engineering or science graduates seeking to work in nuclear research centres.
What you'll work with
- ASTM E321 (determination of burnup by neodymium-148 method)
- ISO/IEC 17025:2017 (competence of testing and calibration laboratories)
- IAEA SSR-6 (Rev. 1) (regulations for the safe transport of radioactive material)
- Royal Decree 1836/1999 (Spanish regulation on nuclear and radioactive facilities)
- Royal Decree 1029/2022 (Spanish regulation on health protection against ionising radiation)
- MCNP
- ORIGEN
- Genie 2000
- ImageJ
8 modules
1.1Hot cell design1.2Biological shielding1.3Remote manipulators1.4Ventilation and negative pressure1.5Confinement1.6Waste management1.7Radiation protection1.8Transport in Type B packages1.9European reference facilities1.10Practical: simplified shielding calculation
2.1Remote visual inspection2.2Profilometry2.3Eddy currents2.4Axial gamma spectrometry2.5Neutron radiography2.6Length measurement2.7Oxide thickness measurement2.8Tomography2.9Preparation for puncturing2.10Lab: analysis of a gamma spectrum
3.1Rod puncturing3.2Free volume3.3Isotopic composition of krypton and xenon3.4Release fraction3.5Release models3.6Correlations with burnup3.7Safety implications3.8Quality control3.9Uncertainty3.10Case study: fission gas release fraction
4.1Cutting and preparation4.2Cladding metallography4.3Pellet ceramography4.4Optical microscopy4.5Scanning electron microscopy4.6Electron probe microanalysis4.7FIB lamella preparation4.8Density4.9Burnup according to ASTM E3214.10Workshop: in-cell metallography protocol
5.1Ring tensile testing5.2Burst tests5.3Miniaturised Charpy5.4Microhardness5.5Creep5.6Remote operation of machines5.7Hydrogen content5.8Specimen design5.9Remote calibration5.10Lab: interpretation of a ring tensile test
6.1Fuel dissolution6.2ICP-MS spectrometry6.3TIMS spectrometry6.4Burnup determination6.5Actinide analysis6.6Fission products6.7Radiochemical separations6.8Uncertainty6.9Data for codes6.10Case study: burnup from neodymium-148
7.1ISO/IEC 17025 accreditation7.2Sample traceability7.3Examination databases7.4Code validation7.5Licensing support7.6Waste management7.7International cooperation7.8Lessons learned7.9Process improvement7.10Case study: use of PIE data in code validation
8.1Campaign objective8.2Rod selection8.3Transport plan8.4Non-destructive examinations8.5Destructive examinations8.6Mechanical tests8.7Chemical analyses8.8Use of results8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
A 100% online programme on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so it fits around your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is MCNP, ORIGEN, Genie 2000 and ImageJ, in free, academic or evaluation versions. Practice is based on real procedures for gamma spectrometry of fuel rods, rod puncturing and fission gas analysis, and hot cell metallography. Assessment is continuous by module plus the final project.
Standards covered: ASTM E321, ISO/IEC 17025:2017, IAEA SSR-6 (Rev. 1), Royal Decree 1836/1999, Royal Decree 1029/2022.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- Internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with MCNP, ORIGEN, Genie 2000 and ImageJ, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Critical Data Auditing and Control
Online postgraduate diploma of 800 hours in critical data auditing and control. 8 modules covering critical data and integrity, control and audit frameworks, technical data controls,…
Diploma in Tactical Aircraft Design
Online postgraduate diploma of 800 hours in tactical aircraft design: 8 modules covering conceptual design, configuration, weight and balance, performance, structures, systems and avionics, and cost…
Diploma in Ethics in Environmental Testing
Online postgraduate diploma of 800 hours in ethics in environmental testing: 8 modules covering professional ethics, test data integrity, test representativeness, laboratory safety, environmental impact, testing…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships