Diploma in Licensing, IP and Limitation of Liability
Online postgraduate diploma of 800 hours in licensing, IP and limitation of liability. 8 modules covering fundamentals, regulatory framework, analysis methods, design, systems integration, risk, validation and an integrated case study, with an assigned technical tutor.
Diploma in Licensing, IP and Limitation of Liability — studying from Singapore
Singapore has no domestic vehicle manufacturing, so automotive engineering here focuses on vehicle testing, distribution, electrification policy, aftermarket engineering and motorsport events. The Marina Bay Street Circuit hosts the Singapore Grand Prix, supporting a niche motorsport engineering and events ecosystem. Regulation of road vehicles, emissions and inspections is handled by the Land Transport Authority, while the Vehicle Inspection and Certification functions interact with the sector. Typical employers include global distributors, service groups and engineering consultancies serving the regional market.
Fees for Singapore: S$1,280 (Singapore dollar), with instalments and employer sponsorship available.
Relevant bodies in Singapore
Typical roles
Questions from Singapore
Which Singapore bodies oversee automotive engineering, and is SEIUM's qualification recognised?
Singapore has no separate automotive engineering licence. Vehicle safety and inspection fall under the Land Transport Authority (LTA), and engineers may register as Professional Engineers with the Professional Engineers Board (PEB). SEIUM's qualifications are private, not state degrees, and not accredited by any national body. Recognition is decided by employers or the relevant body, so confirm acceptance before you commit.
What kinds of employers in Singapore use automotive and motorsport engineering skills?
Singapore's automotive activity covers vehicle distributors, service and workshop groups, fleet operators, and suppliers linked to the wider manufacturing sector. Motorsport-related roles are fewer but exist within teams and events in Singapore, such as the Singapore Grand Prix ecosystem. Employers typically look at practical experience and project evidence. Your SEIUM final project can support your application, though its value depends on each employer.
How much time does the course need alongside work, and what English level is required?
Everything is delivered online in English, and you get an assigned technical tutor. Plan carefully, as a master's needs about 1,900 hours and a specialist course about 300 hours, which is significant if you work full-time. Because lessons are online, you can schedule study around Singapore working hours. Ask about instalment plans, and check whether your employer will sponsor part of the fees.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Master the technical fundamentals of Licensing, IP and Limitation of Liability and its regulatory vocabulary.
Apply ISO 21500, ISO 56002 (innovation management) and ISO 37001 to real design and validation decisions.
Build and correlate calculation models with Power BI and Tableau.
Plan and run test campaigns in a project office and a business prototyping lab.
Analyse operating data and turn it into engineering decisions.
Prepare the technical and compliance dossier required by the client or regulator.
Lead a licensing, IP and limitation of liability project technically from start to finish.
Who it's for
- Technical product managers.
- Programme managers handling licensing and IP clauses.
- Technology policy analysts.
- R&D managers.
- Technology transfer managers.
- Industrial business developers.
- Engineering or science graduates seeking to move into industry.
What you'll work with
- ISO 21500 (project management guidance)
- ISO 56002 (innovation management)
- ISO 37001 (anti-bribery management systems)
- ISO 14001 (environmental management)
- GRI Standards (sustainability reporting)
- CSRD – Directive (EU) 2022/2464 (corporate sustainability reporting)
- EU Taxonomy (sustainable activities classification)
- Horizon Europe (EU research and innovation programme)
- Spanish Law 14/2011 on Science, Technology and Innovation
- Power BI
- Tableau
- MS Project
- Jira
- Miro
8 modules
1.1Fundamental concepts and quantities of Licensing, IP and Limitation of Liability1.2Technology landscape and state of the art1.3Technical terminology and reference documentation1.4Physical and engineering principles applied to the case1.5Functional architecture: from requirements to components1.6Interfaces and dependencies with adjacent systems1.7Typical use cases in the sector1.8Common errors and how to detect them early1.9Data sources and quality criteria1.10Guided initial diagnosis exercise
2.1Applicable regulatory framework: overview2.2Regulatory hierarchy and conflicts between standards2.3Mandatory requirements versus good practice2.4Acceptance criteria and required evidence2.5Technical documentation and traceability2.6Change management and configuration control2.7Audits, inspections and non-conformities2.8Responsibilities and division of scope2.9Interpreting critical clauses2.10Exercise: regulatory checklist
3.1Setting up the model: assumptions and simplifications3.2Selecting tools and the working environment3.3Preparing the input data3.4Workflow and modelling good practice3.5Discretisation and case preparation3.6Boundary conditions and load cases3.7Convergence control and numerical verification3.8Sensitivity analysis and parametric study3.9Automating and reusing models3.10Exercise: building a base model
4.1Design requirements and starting criteria4.2Solution alternatives and comparative analysis4.3Sizing and safety margins4.4Selecting materials, equipment or components4.5Integration with the rest of the system4.6Cost, schedule and manufacturing constraints4.7Reliability, maintainability and service life4.8Sustainability and efficiency in design4.9Design review and risk management4.10Exercise: documented design proposal
5.1System architecture and functional breakdown5.2Interface definition and control5.3Protocols and data exchange5.4Progressive integration and interface testing5.5Electromagnetic and environmental compatibility5.6Configuration management of the whole system5.7Resolving conflicts between subsystems5.8Commissioning the integrated system5.9Traceability from requirements to verification5.10Exercise: interface matrix
6.1Hazard identification and preliminary analysis6.2Failure modes and effects analysis6.3Fault trees and quantitative analysis6.4Allocating reliability targets6.5Barriers, redundancies and fault tolerance6.6Human factors and operating errors6.7Safety evidence and argumentation6.8Risk management throughout the life cycle6.9Indicators and in-service monitoring6.10Exercise: risk analysis of a case
7.1Verification and validation strategy7.2Test plan: scope and coverage7.3Instrumentation and data acquisition7.4Laboratory testing versus field testing7.5Correlation between model and measurement7.6Handling uncertainty and tolerances7.7Failure analysis and corrective actions7.8Commissioning and acceptance criteria7.9Documenting the validation file7.10Exercise: validation report
8.1Defining the case and success criteria8.2Gathering input data and requirements8.3Planning the work and deliverables8.4Technical development guided by the tutor8.5Applying the regulatory framework to the case8.6Verifying results and critical analysis8.7Documenting the deliverable8.8Technical defence and peer review8.9Lessons learned and continuous improvement8.10Final project: final assessment and programme close
How you'll learn
Training is 100% online on the SEIUM campus, with downloadable materials, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within the intake, so it fits around your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Power BI, Tableau, MS Project, Jira and Miro, in free, academic or evaluation versions. Exercises are based on real procedures from a project office, a business prototyping lab and a portfolio analytics environment. Assessment is continuous by module, plus the final integrated project.
Standards covered: ISO 21500, ISO 56002, ISO 37001, ISO 14001, GRI Standards, CSRD (Directive (EU) 2022/2464), EU Taxonomy, Horizon Europe, Spanish Law 14/2011 on Science.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. A university degree is not required.
- Internet connection and a computer able to run the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with Power BI, Tableau, MS Project, Jira and Miro, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Postgraduate Diploma in Extreme Traction and Launch Management
Online 800-hour Postgraduate Diploma in Extreme Traction and Launch Management. 8 modules covering the NHRA Rulebook, the FIA European Drag Racing Championship Regulations and Racepak DataLink…
Diploma in Live Production, Replay and Data Overlay
Online postgraduate diploma of 800 hours in live production, replay and data overlay. 8 modules covering live sports production, SDI and IP video infrastructure (SMPTE ST…
Postgraduate Diploma in Functional GD&T and Advanced CMM
Online 800-hour Postgraduate Diploma in Functional GD&T and Advanced CMM. 8 modules with ASME Y14.5-2018 dimensioning and tolerancing, ISO 1101:2017 geometric tolerancing and PC-DMIS. Dedicated tutor…
More in Automotive & Motorsport
All Automotive & Motorsport programmes → · How to apply · Fees & financing · Scholarships