Diploma in Ethical Philosophy Applied to Military Technology
Online postgraduate diploma of 800 hours in ethical philosophy applied to military technology. 8 modules covering fundamentals, the regulatory framework, analysis methods, design, systems integration, reliability and risk, and validation, with an assigned technical tutor.
Diploma in Ethical Philosophy Applied to Military Technology — studying from Singapore
Singapore maintains a comprehensive defence sector through the Ministry of Defence and the Defence Science and Technology Agency, which develops military technologies and manages procurement. Engineering work covers land systems, ammunition, command and control, and simulation. Industry partners include ST Engineering, which supplies defence and security systems globally. Engineers here work within strict security and export control frameworks, often combining systems integration with reliability and safety engineering.
Fees for Singapore: S$1,280 (Singapore dollar), with instalments and employer sponsorship available.
Relevant bodies in Singapore
Typical roles
Questions from Singapore
How does defence engineering work in Singapore, and which bodies oversee it?
Singapore's defence engineering is largely centred on the Ministry of Defence (MINDEF) and DSTA, the defence procurement and development agency, along with the Singapore Armed Forces. Engineers may register with the Professional Engineers Board (PEB). SEIUM's qualifications are private, not state degrees, and not accredited by any national body, so recognition for defence roles depends on the employer or relevant authority.
Who employs defence and land systems engineers in Singapore?
Main employers include MINDEF, DSTA, the SAF, and defence industry companies including ST Engineering. Access to many roles requires security clearance and citizenship or residency rules, so check eligibility early. Employers focus on proven competence and clearance status. Your final project can illustrate technical capability, but it does not replace these requirements.
Is the course manageable alongside a job, and can employers fund it?
The programme is fully online and taught in English, with an assigned technical tutor. Plan for a heavy workload: 1,900 hours for a master's, 800 for a postgraduate diploma, or 300 for a specialist course. Fees are payable in instalments, and employer sponsorship is possible, which is common in defence-linked organisations, though approval is up to them.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Master the technical fundamentals of ethical philosophy applied to military technology and its regulatory vocabulary.
Apply International Humanitarian Law (Geneva Conventions), the Arms Trade Treaty (ATT) and EU Common Position 2008/944/CFSP to real design and validation decisions.
Build and correlate calculation models with MATLAB/Simulink and ANSYS Mechanical.
Plan and run test campaigns in a MIL-STD-810 environmental test laboratory and a requirements verification environment.
Analyse operational data and translate it into engineering decisions.
Prepare the technical and compliance dossier required by the client or regulator.
Provide technical leadership for a project in this field from start to finish.
Who it's for
- Defence regulatory compliance specialists.
- Defence programme auditors.
- Quality assurance engineers.
- Export control managers.
- Defence and security policy analysts.
- Industrial programme managers.
- Engineering or science graduates seeking to enter the defence industry.
What you'll work with
- International Humanitarian Law (Geneva Conventions) (law of armed conflict)
- Arms Trade Treaty (ATT) (international arms trade)
- EU Common Position 2008/944/CFSP (exports of military technology)
- Regulation (EU) 2021/821 (dual-use items)
- Spanish Law 53/2007 (control of foreign trade in defence material)
- Wassenaar Arrangement (export controls regime)
- NATO interoperability STANAGs (standardisation agreements)
- AQAP 2110 (NATO quality assurance)
- ISO 9001 and EN 9100 (quality management)
- MIL-STD-810 (environmental conditions)
- MATLAB/Simulink
- ANSYS Mechanical
- Enterprise Architect
- DOORS Next
- Polarion ALM
8 modules
1.1Fundamental concepts and magnitudes of ethical philosophy applied to military technology1.2Technology landscape and state of the art1.3Technical terminology and reference documentation1.4Physical and engineering principles applied to the case1.5Functional architecture: from requirements to components1.6Interfaces and dependencies with adjacent systems1.7Typical use cases in the sector1.8Common errors and how to detect them in time1.9Data sources and quality criteria1.10Guided initial diagnosis exercise
2.1Applicable regulatory framework: overview2.2Regulatory hierarchy and conflicts between standards2.3Mandatory requirements versus good practice2.4Acceptance criteria and required evidence2.5Technical documentation and traceability2.6Change management and configuration control2.7Audits, inspections and non-conformances2.8Responsibilities and division of scope2.9Interpretation of critical clauses2.10Exercise: regulatory checklist
3.1Model set-up: assumptions and simplifications3.2Selection of tools and working environment3.3Preparation of input data3.4Workflow and good modelling practice3.5Discretisation and case preparation3.6Boundary conditions and load cases3.7Convergence control and numerical verification3.8Sensitivity analysis and parametric study3.9Automation and reuse of models3.10Exercise: building a base model
4.1Design requirements and starting criteria4.2Solution alternatives and comparative analysis4.3Sizing and safety margins4.4Selection of materials, equipment or components4.5Integration with the rest of the system4.6Cost, schedule and manufacturing constraints4.7Reliability, maintainability and service life4.8Sustainability and efficiency in design4.9Design review and risk management4.10Exercise: documented design proposal
5.1System architecture and functional breakdown5.2Interface definition and control5.3Protocols and data exchange5.4Progressive integration and interface testing5.5Electromagnetic and environmental compatibility5.6Configuration management of the whole system5.7Resolving conflicts between subsystems5.8Commissioning of the integrated system5.9Traceability from requirements to verification5.10Exercise: interface matrix
6.1Hazard identification and preliminary analysis6.2Failure modes and effects analysis6.3Fault trees and quantitative analysis6.4Allocation of reliability targets6.5Barriers, redundancy and fault tolerance6.6Human factors and operating errors6.7Safety evidence and argumentation6.8Risk management throughout the life cycle6.9Indicators and in-service monitoring6.10Exercise: risk analysis of a case
7.1Verification and validation strategy7.2Test plan: scope and coverage7.3Instrumentation and data acquisition7.4Laboratory testing versus field testing7.5Correlation between model and measurement7.6Treatment of uncertainty and tolerances7.7Failure analysis and corrective actions7.8Commissioning and acceptance criteria7.9Documentation of the validation file7.10Exercise: validation report
8.1Case definition and success criteria8.2Collection of input data and requirements8.3Work planning and deliverables8.4Technical development guided by the tutor8.5Application of the regulatory framework to the case8.6Verification of results and critical analysis8.7Documentation of the deliverable8.8Technical defence and peer review8.9Lessons learned and continuous improvement8.10Final project: final assessment and close of the programme
How you'll learn
A 100% online programme on the SEIUM campus, with downloadable materials, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so the programme fits around your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is MATLAB/Simulink, ANSYS Mechanical, Enterprise Architect, DOORS Next and Polarion ALM, in free, academic or evaluation versions. Tests are studied on real procedures from a MIL-STD-810 environmental test laboratory, a requirements verification environment and a systems cybersecurity laboratory. Assessment is continuous by module plus the final integrating project.
Standards covered: International Humanitarian Law (Geneva Conventions), Arms Trade Treaty (ATT), EU Common Position 2008/944/CFSP, Regulation (EU) 2021/821, Spanish Law 53/2007, Wassenaar Arrangement, NATO interoperability STANAGs, AQAP 2110, ISO 9001 and EN 9100, MIL-STD-810.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. A university degree is not required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with MATLAB/Simulink, ANSYS Mechanical, Enterprise Architect, DOORS Next and Polarion ALM, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector; no university degree is required.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Ethics of Stealth Technology Development
Online postgraduate diploma of 800 hours in the ethics of stealth technology development. 8 modules covering low-observability concepts, the ethics of concealment, secrecy and society, export…
Diploma in Submarine Materials and Standards
Online postgraduate diploma of 800 hours in submarine materials and standards. 8 modules covering the submarine as a structure, high-strength steels, titanium and composites, structural calculation…
Diploma in ASME/ISO Standards for Nuclear Welding
Online postgraduate diploma of 800 hours in ASME and ISO standards for nuclear welding. 8 modules covering nuclear component construction, welding metallurgy, welding processes, procedure and…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships